Template:USB Device Data

From LinuxTVWiki
Revision as of 09:36, 22 November 2010 by Hlangos (talk | contribs) (Reverted edits by Dnw (Talk) to last version by Hlangos)
Jump to navigation Jump to search


Introduction to this page

The data contained in this template is slowly replacing the collection of tables in the DVB-T_USB Devices article.

The main purpose is to collect the available information on devices that now is scattered around on device/chipset/driver pages, and at the same time make it accessible from all those places. Having a "single copy" will hopefully ease updating information on devices and drivers.

Keeping the information in one place of course means that there will be lots of details that most users don't care about. Using some minor template voodoo, it is possible to select a limited subset of data fields and thus construct tables with a small subset of columns. Go to Template:List of Device List Templates for a starting point and HLPlayground2 for examples.

With the help of the ParserFunctions/StringFunctions extension it is possible to select a subsets of the datasets for other purposes. E.g. The devices that use a certain tuner or the devices by a certain vendor. Some examples are currently shown on HLPlayground2 and HLPlayground2/doubleselection.

Note: If you edit the data below, you may have to outsmart your browser-cache and the rendering cache of the wiki. Otherwise your changes will not appear in the table renderings.
Note: Do yourself a favor and make sure you have enabled section editing in your preferences. The whole page is currently 78 kbyte and it will break the 100kb limit pretty soon.


There's a helper page to for editors DVB-T_USB_Devices_ListData/Helper that shows all devices.


Usage Examples on device pages

Low detail:

{{Device_List_Low_Detail/Header
| content = 
{{USB_Device_Data
|renderwith=Device_List_Low_Detail/Row
|selatt1=did
|selval1=msi-digivox-mini-ii-v3
}}
}}

As you can see did is set as selection attribute and msi-digivox-mini-ii-v3 as selection value.

If you want to show some more detail you can exchange Low for Medium in both template names. The /Header and /Row template.

{{Device_List_Medium_Detail/Header
| content = 
{{USB_Device_Data
|renderwith=Device_List_Medium_Detail/Row
|selatt1=did
|selval1=msi-digivox-mini-ii-v3
}}
}}

There is also a set of templates for Full details if you want to get the fields that are ment for filtering only, like the did field itself.

Syntax and Semantics

Here is a cut'n paste template for new devices. (Don't forget use the same XYZ in all three places.)

</includeonly><noinclude>
==== XYZ ====
{{DeviceDisplayMedium|XYZ}}
</noinclude><includeonly>
{{{{{renderwith}}}|src=USB_Device_Data|selatt1={{{selatt1|}}}|selval1={{{selval1|}}}|selatt2={{{selatt2|}}}|selval2={{{selval2|}}}|selatt3={{{selatt3|}}}|selval3={{{selval3|}}}|selatt4={{{selatt4|}}}|selval4={{{selval4|}}}
| did=XYZ
| vendor=
| device=
| standard=
| supported=
| pic=
| url=
| hostinterface=
| usbid=
| hw=
| tuner=
| demodulator=
| usbbridge=
| fw=
| comment=
}}

did a device ID that makes it possible to render just this one device in a table and to jump directly to the device on this page. As matching in the selection templates is done on substrings you need to make sure that the did's are unique and disjoint.
vendor the device manufacturer/vendor. E.g. Hauppauge
standard the broadcasting standard or standards that the devce supports E.g. Possible values would be the analog encodings "ANALOG-PAL" "ANALOG-NTSC" "ANALOG-SECAM" as well as digital encodings "DVB-T" "DVB-C" "DVB-C2" "DVB-S" "DVB-S2" "DVB-H" "DVB-SH" "ATSC" "ATSC-M/H" "ISDB-S" "ISDB-T" "1seg" "ISDB-C" "SBTVD/ISDB-Tb" "DMB-T/H" "ADTB-T" "CMMB" "DMB-T" "T-DMB" "S-DMB" "MediaFLO". Even "FM-RADIO" and "AM-RADIO" could be included in this list.
device the device name. E.g. Cinergy XXS This is also the place to put a link to a device page.
supported support status.
   {{yes}} or {{no}} 

if there is no further detail but I'd prefer something like

    {{Supported in Kernel|since=2.6.25|file=drivers/media/dvb/dvb-usb/dib0700_devices.c}} 

if supported by vanilla kernel since version 2.6.25 (the entry will be linked to the kernel source repository)

   {{Supported in HG|since=2009-01-31}} 

for support in main line mercurial repository

   {{Supported in HG Branch|since=2009-01-31|branchurl=http://linuxtv.org/hg/~anttip/af9015/}} 

for support in certain branch

   {{Supported in External|since=2009-01-31|url=http://mcentral.de/wiki/index.php5/Em2880}} 

for support somewhere else

pic preferably an image uploaded to the wiki (using 120px width). Like this:
[[image:Dvb-t-usb-msi-digivox-ii-rev3-001.jpg|120px]]
Links to (not embedding of) external pictures are OK in a pinch, but those might disappear any time as some vendors only keep the current devices on their page and every older Device vanishes. Please, please, please, if you own a device that doesn't have a picture yet, take one and upload it. Even a blurry picture taken with a mobile phone camera is better than nothing. However, do not upload pictures that you downloaded from a vendor page without asking for permission to use it here. Taking a picture of a device that you own is the better choice and other users will greatly benefit from it.
url link to the manufacturers/vendors page for that device. but also links to linux user experience pages, forum articles or mailing list achives regarding this device.
hostinterface interface supported. E.g. "USB1.1" and "USB2.0" but also "ISA" "PCI32" "PCI64" "PCI-X" "PCIe" "PCCARD" "CardBus" "ExpressCard" "IEEE1394"
hw summary of the hardware (human readable). this will hold the old data during transition and also allow to add hw related information beyond tuner, demodulator and usb bridge.
usbid usb id. 4 hex digits, colon, 4 hex digits. lower case. e.g. 12ba:f001 preferably only add the "cold" id. The one shown before firmware upload. The warm id should go the the device's page.
  • tuner
  • demodulator
  • usbbridge
machine readable component names for implementing filters based on this. E.g. af9015, vt7045, mt2060
fw firmware name. link?
comment human readable comments. if those comments stretch several lines, it is time to make a device page. :-)

Data

Click on Edit to see the data.

unsupported devices

conceptronic-ctvdigdual-v2

The data for the device conceptronic-ctvdigdual-v2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


agk-10314

The data for the device agk-10314 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


artec-atsc-t14a

The data for the device artec-atsc-t14a is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

tvisto-dvbusb-white

The data for the device tvisto-dvbusb-white is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

tvisto-dvbusb-ec168

The data for the device tvisto-dvbusb-ec168 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


avermedia a8xx series

avermedia-a800

The data for the device avermedia-a800 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


avermedia-a835

The data for the device avermedia-a835 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


avermedia-a825

The data for the device avermedia-a825 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


avermedia h800

avermedia-h830d

The data for the device avermedia-h830d is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


AF9005 Devices

ansonic-stick

The data for the device ansonic-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


allnet-all2006

The data for the device allnet-all2006 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

delock93168

The data for the device delock93168 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


Easy TV A05

The data for the device easytv-a05 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


ridata-t100

The data for the device ridata-t100 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-txe-rev1

The data for the device terratec-txe-rev1 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


AF9015 Devices

afatech-9015-9016

The data for the device afatech-9015-9016 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

avermedia-a309

The data for the device avermedia-a309 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

alcor-dtv-duo

The data for the device alcor-dtv-duo is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


avermedia-a815

The data for the device avermedia-a815 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

avermedia-a850

The data for the device avermedia-a850 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

avermedia-a805

The data for the device avermedia-a805 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

conceptronic-ctvdigrcu

The data for the device conceptronic-ctvdigrcu is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dikom-ultimate

The data for the device dikom-ultimate is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


digitalnow-tinytwin-v1

The data for the device digitalnow-tinytwin-v1 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


digitalnow-tinytwin-v2

The data for the device digitalnow-tinytwin-v2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


digitalnow-tinytwin-v3

The data for the device digitalnow-tinytwin-v3 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


digittrade-stick

The data for the device digittrade-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

fujitsu-siemens-slim

The data for the device fujitsu-siemens-slim is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

geniatech-t328b

The data for the device geniatech-t328b is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

genius-tvgo-t03

The data for the device genius-tvgo-t03 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

hama-usb2stick

The data for the device hama-usb2stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


kworld-395u

The data for the device kworld-395u is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


kworld-399u-dual

The data for the device kworld-399u-dual is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

kworld-ub499-2t

The data for the device kworld-ub499-2t is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


kworld-pc160-2t

The data for the device kworld-pc160-2t is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


kworld-mc810

The data for the device kworld-mc810 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


leadtek-dtv-gold

The data for the device leadtek-dtv-gold is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

lifeview-lv5t

The data for the device lifeview-lv5t is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

msi-digivox-duo

The data for the device msi-digivox-duo is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

msi-digivox-mini-ii-v3

The data for the device msi-digivox-mini-ii-v3 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


msi-digivox-mini-iii

The data for the device msi-digivox-mini-iii is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

peak-203244

The data for the device peak-203244 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


pinnacle-71e

The data for the device pinnacle-71e is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

szforward-eztv859

The data for the device szforward-eztv859 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


telstar-starstick2

The data for the device telstar-starstick2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-txe-rev2

The data for the device terratec-txe-rev2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


tevion-dk-5203

The data for the device tevion-dk-5203 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

trekstor-dvb-t-usb

The data for the device trekstor-dvb-t-usb is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

tvisto-dvbusb-black

The data for the device tvisto-dvbusb-black is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

twinhan-ad-tu700

The data for the device twinhan-ad-tu700 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

xtensions-xd-380

The data for the device xtensions-xd-380 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-cinergy-t-stick-rc-hd

The data for the device terratec-cinergy-t-stick-rc-hd is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


AF9035 Devices

asus-my-cinema-u3100-mini-plus

The data for the device asus-my-cinema-u3100-mini-plus is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


terratec-cinergy-t-stick-af9035

The data for the device terratec-cinergy-t-stick-af9035 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


ezcap-afatech-9035

The data for the device ezcap-afatech-9035 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


msi-digivox-mini-hybrid

The data for the device msi-digivox-mini-hybrid is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


Anysee E30 Devices

anysee-e30-dvb-t

The data for the device anysee-e30-dvb-t is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

anysee-e30-plus-dvb-t

The data for the device anysee-e30-plus-dvb-t is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

anysee-e30-combo-plus-dvb-tc

The data for the device anysee-e30-combo-plus-dvb-tc is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


au6610 devices

sigmatek-dvb-110

The data for the device sigmatek-dvb-110 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

Intel CE6230 based receivers

intel-ce9500-reference

The data for the device intel-ce9500-reference is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


avermedia-a310

The data for the device avermedia-a310 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


TerraTec Cinergy T²

terratec-cinergy-t2

The data for the device terratec-cinergy-t2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

cxusb

medion-md95700

The data for the device medion-md95700 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


dvico-fusion-hdtv-5-gold

The data for the device dvico-fusion-hdtv-5-gold is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


dvico-fusion-hdtv-dual-1

The data for the device dvico-fusion-hdtv-dual-1 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dvico-fusion-hdtv-lgz201

The data for the device dvico-fusion-hdtv-lgz201 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dvico-fusion-hdtv-th7579

The data for the device dvico-fusion-hdtv-th7579 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

digitalnow-dee1601-dual

The data for the device digitalnow-dee1601-dual is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dvico-fusion-hdtv-dual-2

The data for the device dvico-fusion-hdtv-dual-2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dvico-fusion-hdtv-dual-4-rev1

The data for the device dvico-fusion-hdtv-dual-4-rev1 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dvico-fusion-hdtv-nano-1

The data for the device dvico-fusion-hdtv-nano-1 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dvico-fusion-hdtv-nano-2

The data for the device dvico-fusion-hdtv-nano-2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

avermedia-a868

The data for the device avermedia-a868 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dvico-fusion-hdtv-dual-4-rev2

The data for the device dvico-fusion-hdtv-dual-4-rev2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


DiB0700 USB2.0 DVB-T devices

dibcom-stk7700p-ref

The data for the device dibcom-stk7700p-ref is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


dibcom-stk7700pc-ref

The data for the device dibcom-stk7700pc-ref is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


hauppauge-nova-t-stick

The data for the device hauppauge-nova-t-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


avermedia-avertv-volar

The data for the device avermedia-avertv-volar is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

hauppauge-nova-t500-dual

The data for the device hauppauge-nova-t500-dual is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

compro-videomate-u500

The data for the device compro-videomate-u500 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


uniwill-stk7700p

The data for the device uniwill-stk7700p is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

leadtek-stk7700p

The data for the device leadtek-stk7700p is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

pinnacle-pctv-2000e

The data for the device pinnacle-pctv-2000e is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


terratec-dt-xs-diversity

The data for the device terratec-dt-xs-diversity is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


hauppauge-nova-td-diversity

The data for the device hauppauge-nova-td-diversity is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


dibcom-stk7700d-ref

The data for the device dibcom-stk7700d-ref is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


dibcom-dib7070p-ref

The data for the device dibcom-dib7070p-ref is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

pinnacle-pctv-flash-stick

The data for the device pinnacle-pctv-flash-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dibcom-dib7070pd-ref

The data for the device dibcom-dib7070pd-ref is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

pinnacle-pctv-dual-diversity-stick

The data for the device pinnacle-pctv-dual-diversity-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


avermedia-avertv-dvbt-t-express

The data for the device avermedia-avertv-dvbt-t-express is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


gigabyte-u7000

The data for the device gigabyte-u7000 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


artec-t14br-dib7xxx-based

The data for the device artec-t14br-dib7xxx-based is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

asus-my-cinema-u3000-mini

The data for the device asus-my-cinema-u3000-mini is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

asus-my-cinema-u3100-mini-dib

The data for the device asus-my-cinema-u3100-mini-dib is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

hauppauge-nova-t-ce-stick

The data for the device hauppauge-nova-t-ce-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


hauppauge-nova-t-mytv-t-stick

The data for the device hauppauge-nova-t-mytv-t-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


terratec-cinergy-ht-usb-xe

The data for the device terratec-cinergy-ht-usb-xe is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


pinnacle-expresscard-320cx

The data for the device pinnacle-expresscard-320cx is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

pinnacle-pctv-72e

The data for the device pinnacle-pctv-72e is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


pinnacle-pctv-73e-plain

The data for the device pinnacle-pctv-73e-plain is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


yuan-ec372s

The data for the device yuan-ec372s is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-cinergy-ht-express

The data for the device terratec-cinergy-ht-express is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-cinergy-t-usb-xxs-t3

The data for the device terratec-cinergy-t-usb-xxs-t3 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


hauppauge-nova-td-stick-52009

The data for the device hauppauge-nova-td-stick-52009 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


hauppauge-nova-td-500-84xxx

The data for the device hauppauge-nova-td-500-84xxx is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


gigabyte-u8000-rh

The data for the device gigabyte-u8000-rh is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


yuan-high-tech-stk7700ph

The data for the device yuan-high-tech-stk7700ph is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


yuan-high-tech-pd770a

The data for the device yuan-high-tech-pd770a is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


crypto-diva-pd770a

The data for the device crypto-diva-pd770a is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


asus-my-cinema-u3000hybrid

The data for the device asus-my-cinema-u3000hybrid is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


pinnacle-pctv-hd-pro-usb-stick

The data for the device pinnacle-pctv-hd-pro-usb-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

pinnacle-pctv-hd-usb-stick

The data for the device pinnacle-pctv-hd-usb-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-cinergy-t-express

The data for the device terratec-cinergy-t-express is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-cinergy-dt-usb-xs-diversity-t5

The data for the device terratec-cinergy-dt-usb-xs-diversity-t5 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


sony-playtv

The data for the device sony-playtv is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


yuan-pd378s

The data for the device yuan-pd378s is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

hauppauge-atsc-minicard-b200-

The data for the device hauppauge-atsc-minicard-b200- is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

hauppauge-atsc-minicard-b210-

The data for the device hauppauge-atsc-minicard-b210- is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

yuan-high-tech-mc770

The data for the device yuan-high-tech-mc770 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

elgato-eyetv-dtt-plain

The data for the device elgato-eyetv-dtt-plain is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


elgato-eyetv-dtt-dlx-pd378s

The data for the device elgato-eyetv-dtt-dlx-pd378s is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

elgato-eyetv-dtt-dlx-v2

The data for the device elgato-eyetv-dtt-dlx-v2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


leadtek-winfast-dtv-dongle-h

The data for the device leadtek-winfast-dtv-dongle-h is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

yuan-high-tech-stk7700d

The data for the device yuan-high-tech-stk7700d is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

yuan-high-tech-dibcom-stk7700d

The data for the device yuan-high-tech-dibcom-stk7700d is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

pinnacle-pctv-73a

The data for the device pinnacle-pctv-73a is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

pinnacle-pctv-73e-se

The data for the device pinnacle-pctv-73e-se is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


pinnacle-pctv-282e

The data for the device pinnacle-pctv-282e is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dibcom-stk7770p-reference-design

The data for the device dibcom-stk7770p-reference-design is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-cinergy-t-usb-xxs-hd

The data for the device terratec-cinergy-t-usb-xxs-hd is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


dibcom-stk807xpvr-reference-design

The data for the device dibcom-stk807xpvr-reference-design is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dibcom-stk807xp-reference-design

The data for the device dibcom-stk807xp-reference-design is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

prolink-pixelview-sbtvd

The data for the device prolink-pixelview-sbtvd is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


DiB3000M-B USB1.1 DVB-T devices

avermedia-dib3000mb-based

The data for the device avermedia-dib3000mb-based is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

compro-videomate-u2000

The data for the device compro-videomate-u2000 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


dibcom-dib3000mb-mod3000

The data for the device dibcom-dib3000mb-mod3000 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


kworld-xpert-dtv-dib3000mb

The data for the device kworld-xpert-dtv-dib3000mb is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

grandtec-dib3000mb

The data for the device grandtec-dib3000mb is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

unknown-dib3000mb

The data for the device unknown-dib3000mb is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

twinhan-magicbox-i-hama

The data for the device twinhan-magicbox-i-hama is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


artec-t1-an2135

The data for the device artec-t1-an2135 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


videowalker-dib3000mb

The data for the device videowalker-dib3000mb is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


artec-t1-an2235

The data for the device artec-t1-an2235 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


kworld-300u

The data for the device kworld-300u is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

adstech-ptv333

The data for the device adstech-ptv333 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


kworld-xpert-usb2

The data for the device kworld-xpert-usb2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


artec-t1-dib3000mb-usb2

The data for the device artec-t1-dib3000mb-usb2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


DiB3000M-C/P USB2.0 DVB-T devices

dibcom-dib3000mc-mod3000p

The data for the device dibcom-dib3000mc-mod3000p is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


artec-t1-3000mc-usb2

The data for the device artec-t1-3000mc-usb2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

lite-on-dib3000mc

The data for the device lite-on-dib3000mc is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


msi-digivox-mini-sl

The data for the device msi-digivox-mini-sl is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


grand-dib3000mc

The data for the device grand-dib3000mc is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

artec-t14-dib3000mc-based

The data for the device artec-t14-dib3000mc-based is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


leadtek-dib3000mc-based

The data for the device leadtek-dib3000mc-based is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

yuan-pd300-dib3000mc

The data for the device yuan-pd300-dib3000mc is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


clones
toshiba-px1211e-1tvd

The data for the device toshiba-px1211e-1tvd is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


intuix-tnt-s800

The data for the device intuix-tnt-s800 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

medion-95733-95713

The data for the device medion-95733-95713 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

typhoon-tv-movie-dib3000mc

The data for the device typhoon-tv-movie-dib3000mc is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


Nebula DigiTV USB version - DVB-T

nebula-micro-digitv-usb

The data for the device nebula-micro-digitv-usb is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


dtt200u.c WideView/Yakumo/Hama/Typhoon/Club3D/Miglia DVB-T USB2.0 devices

wideview-wt200u

The data for the device wideview-wt200u is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

wideview-wt220u

The data for the device wideview-wt220u is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

wideview-zl353-wt220u

The data for the device wideview-zl353-wt220u is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

wideview-fc-wt220u

The data for the device wideview-fc-wt220u is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

miglia-wt220u

The data for the device miglia-wt220u is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


m920x devices

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=drivers/media/dvb/dvb-usb/m920x.c

msi-mega-sky-580

The data for the device msi-mega-sky-580 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


lifeview-lr540

The data for the device lifeview-lr540 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

zappa-lr523

The data for the device zappa-lr523 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

msi-digivox-mini-ii-v1

The data for the device msi-digivox-mini-ii-v1 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dposh-920x

The data for the device dposh-920x is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

Hauppauge WinTV-NOVA-T usb2

hauppauge-wintv-nova-t-usb2

The data for the device hauppauge-wintv-nova-t-usb2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


HanfTek UMT-010

hanftek-umt-010

The data for the device hanftek-umt-010 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


MSI Mega Sky 55801 DVB-T USB2.0

msi-mega-sky-55801

The data for the device msi-mega-sky-55801 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


a-link-dtu-dvb-t-no-postfix

The data for the device a-link-dtu-dvb-t-no-postfix is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


Twinhan DVB-T USB2.0

digitalnow-tinyusb-2

The data for the device digitalnow-tinyusb-2 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

digitalrise-ter-beetle

The data for the device digitalrise-ter-beetle is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

dnt-euromini-100

The data for the device dnt-euromini-100 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

fujitsu-siemens-dvbt-mobile-tv-tuner

The data for the device fujitsu-siemens-dvbt-mobile-tv-tuner is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


twinhandtv-alpha-rev7045

The data for the device twinhandtv-alpha-rev7045 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

twinhandtv-magicboxii

The data for the device twinhandtv-magicboxii is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


WideView/Yakumo/Hama/Typhoon/Yuan Boxes and Pens

bestbuy-easy-tv-wt220u

The data for the device bestbuy-easy-tv-wt220u is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

Supported Em2880/Em2870 Based USB DVB-T devices

bestbuy-easy-tv-hybrid

The data for the device bestbuy-easy-tv-hybrid is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

AME DTV-5100 / TechGear DigitalTV Stick (TGTV-490)

ame-dtv-5100

The data for the device ame-dtv-5100 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)


AVerMedia AverTV Hybrid Volar HX (A827)

avermedia-a827

The data for the device avermedia-a827 is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

Supported TM5600/6000/6010 Based USB DVB-T devices

terratec-cinergy-hybrid-xe

The data for the device terratec-cinergy-hybrid-xe is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

terratec-cinergy-hybrid-stick

The data for the device terratec-cinergy-hybrid-stick is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)

hauppauge-wintv-hvr900h

The data for the device hauppauge-wintv-hvr900h is right here. You just can't see it because it is meant to be used in a template 'transclusion'. If you are logged in you can click on the [edit] link to the right to change the data for this device. If you are not logged in, you can click on the view source tab at the top of this page to at least see how data is stored here.

It's probably best if you open the edit link in a separate tab. That way you can use this tab to read the explanation of the syntax above or jump back to the place where you came from and see how your changes look there. (Don't forget that your browser cache or the wiki's rendering cache might need some time or persuasion to catch up with the new content.)