Twinhan VP-1030A: Difference between revisions
Candinator (talk | contribs) |
Candinator (talk | contribs) |
||
| Line 64: | Line 64: | ||
| ? |
| ? |
||
| ? |
| ? |
||
| Working, |
| Working, not enough tests done |
||
|- |
|- |
||
| Aston Viaccess Pro |
| Aston Viaccess Pro |
||
Revision as of 12:59, 1 June 2005
Introduction
DVB-S Budget PCI card by Twinhan Technologies
The only frontend driver for this card is the dst module. The tuner component initialization routines are held in the ASIC in the form of firmware (not reloadable through software). The oldest card in the DVB-S family from Twinhan !
This card uses the bttv driver. Well suppported by LinuxTV drivers.
The Common Interface is not yet supported by the LinuxTV drivers, but only by the closed source drivers under RedHat 9.0 (kernel 2.4.20).
The card is believed to support almost all major CAM's. No separate initialization required for different CAM's, since all the initialization is done in the ASIC's firmware.
Required modules and parameters
dvb_core dvb_shutdown_timeout=0
bttv i2c_hw=1 card=0x71
bt878
dst
dvb-bt8xx
Photo gallery
The card in it's full glory.
The backside view of the card.
The CAM removed from the card.
The Irdeto CAM that i used with the closed source driver.
CAM tests
Feel free to update this table with other types of CAMs.
| Type | HW version | Viaccess version | Application version | Results |
|---|---|---|---|---|
| SCM Red Viaccess | 1.0 | ? | ? | Working, but random failures are observed every few hours with TPS |
| Aston Mediaguard P/N 901274 | 1.2 | ? | ? | Working, not enough tests done |
| Aston Viaccess Pro | ? | ? | ? | Not working |
| Aston Mediaguard Pro | ? | ? | ? | Not working |
As the dst_ca driver is still under development, the results of this page may change.