--- DVB/INSTALL	2001/01/06 00:47:20	1.3
+++ DVB/INSTALL	2001/05/18 09:58:14	1.4
@@ -5,36 +5,29 @@ Configuration:
   Otherwise, change the path for KERNEL_LOCATION in DVB/driver/Makefile.
   Note that the configuration of the driver sources also has to match that
   of the kernel you are running.
-
-  You should NOT have the kernel version of the i2c driver installed.
-  The videodev driver can be installed, but you could then get some
-  error messages below. But the driver should still work.
-
-  It is better if you do not have any parts of Video4Linux installed
-  into the kernel when testing the DVB driver.
-  I hope our changes will soon be in the standard kernel. The changes are
-  minimal. Most only define new constants for the DVB hardware.
+  You have to have the i2c and videodev drivers enabled in your kernel
+  to use the DVB driver.
 
 - Login as root, change to the directory DVB/driver and type "make".
 
 - If everything compiled without errors, type "make insmod" to install
   the modules.
   During the installation of the modules your PC can "hang" for one or
-  two seconds. This happens during the loading of the ARM application 
-  and is normal.
+  two seconds. This happens during the loading of the ARM application
+  ("firmware") into the DRAM of the AV7110 and is normal.
   You should also see a picture of Pro7 on the composite output now
   (only if you have an LNB pointing on Astra 1e connected to the antenna   
    input of course).
   If you do not get a picture this might be the fault of a still unresolved
   timing problem on some hardware. But the driver should still work with the
-  gVideo application.
+  tuxzap application.
 
 - Change to DVB/libdvb and type "make"
 
-- Now change to DVB/apps and type "make"
+- Now change to DVB/apps/tuxzap and read the instructions
 
-- gVideo is a gtk application for DVB-S reception 
-  a sample config file for Astra is in DVB/apps/xtvrc.astra
-  move this file to ~/.xtvrc
-  The format of this file is still changing a lot!
+- The tuxzap package contains several gtk applications for DVB-S reception
+  read the instructions in the apps/tuxzap directory for more information
+  Sample config files for the tuxzap applications are in DVB/apps/
+  copy them to .dvbrc.