Annotation of DVB/INSTALL, revision 1.9
1.1 cvs 1: Configuration:
2:
3: - Make sure that the kernel sources of the kernel you are using (NOT the
4: sources of some other kernel) are in the directory /usr/src/linux.
5: Otherwise, change the path for KERNEL_LOCATION in DVB/driver/Makefile.
6: Note that the configuration of the driver sources also has to match that
7: of the kernel you are running.
1.4 mocm 8: You have to have the i2c and videodev drivers enabled in your kernel
9: to use the DVB driver.
1.1 cvs 10:
1.9 ! holger 11: - Make sure that your kernel has enabled:
! 12:
! 13: video4linux support (CONFIG_VIDEODEV),
! 14: Input Core Support (CONFIG_INPUT) and
! 15: event device support (CONFIG_INPUT_EVDEV)
! 16:
1.1 cvs 17: - Login as root, change to the directory DVB/driver and type "make".
18:
19: - If everything compiled without errors, type "make insmod" to install
20: the modules.
21: During the installation of the modules your PC can "hang" for one or
1.4 mocm 22: two seconds. This happens during the loading of the ARM application
23: ("firmware") into the DRAM of the AV7110 and is normal.
1.8 js 24:
25: - if you don't use devfs, execute DVB/driver/makedev.napi to create
26: the device nodes
27:
28: - apps/szap/ contains three simple applications for zapping with
29: DVB-S, DVB-C or DVB-T cards; read the comments in
30: apps/szap/szap.c for instructions
31:
32: - if your card has a hardware MPEG2 decoder you can watch TV
33: with e.g. xawtv; otherwise you need a software MPEG2 decoder
34: like mplayer or vlc
35:
36: If you want to use tuxzap:
1.1 cvs 37:
1.2 cvs 38: - Change to DVB/libdvb and type "make"
39:
1.4 mocm 40: - Now change to DVB/apps/tuxzap and read the instructions
1.1 cvs 41:
1.4 mocm 42: - The tuxzap package contains several gtk applications for DVB-S reception
43: read the instructions in the apps/tuxzap directory for more information
44: Sample config files for the tuxzap applications are in DVB/apps/
1.7 holger 45: copy them to .dvbrc.
1.1 cvs 46:
LinuxTV legacy CVS <linuxtv.org/cvs>