--- dvb-kernel/README	2004/01/25 18:31:35	1.9.2.2
+++ dvb-kernel/README	2004/01/25 18:48:44	1.9.2.3
@@ -64,6 +64,27 @@ For 'real' everyday use you probably don
 but install a program like VDR or MythTV.
 (Read ./linux/Documentation/dvb/faq.txt for some links)
 
+When everything is working you probably want to install the driver on your 
+system by typing 'make install'. If you want to load the modules automatically
+when an application tries to open the device you need to add lines like these 
+to your modules.conf:
+
+	probeall /dev/dvb dvb-ttpci
+	alias /dev/dvb/* /dev/dvb
+	below dvb-ttpci alps_bsrv2 alps_tdmb7 alps_tdlb7
+	add below dvb-ttpci grundig_29504-401 grundig_29504-491
+	add below dvb-ttpci stv0299 ves1820
+
+Note: this example is for people with Technotrend-based PCI cards, they must 
+load the dvb-ttpci driver and a matching frontend drivers that are potentially
+used on these cards. In order to find out which ones are required for your
+setup check the lsmod output after loading the driver like described above.
+Those DVB modules that have a usecount greater zero are required in your 
+setup - edit the modules.conf file appropriatly]
+
+Debian users don't edit modules.conf manually but add the lines above to a new
+file in /etc/modutils/ (e.g. /etc/modutils/dvb) and call 'update-modules' then.
+
 --------------------------------------------------------------------------------
 
 The build system has been tested down to 2.4.20, if you run an older kernel