[linux-dvb] Re: outcommand error 1 and ARM RESET

[arvo@softshark.ee]

Ralph Metzler wrote:

> Hans-Peter Raschke writes:
>  > Hello,
>  >
>  > Ralph Metzler wrote:
>  > >
>  > > Hi,
>  > >
>  > > Raymond Lohuis writes:
>  > >  > Hello,
>  > >  >
>  > >  > My name is Raymond Lohuis and i did build the VDR/DVB box too.
>  > >  >
>  > >  > It works fine accept when i insert  an CI Module to watch encrypted
>  > >  > channels.
>  > >  > i get the massage :
>  > >  >
>  > >  >     outcommand error 1
>  > >  >     commandrequest errorr
>  > >  >     Filter shutdown error :51500
>  > >  >
>  > >  > followed by:
>  > >  >
>  > >  >     outcommand error 1
>  > >  >     ARM reset
>  > >  >
>  > >  > When i pull te ci module out the system works fine again.
>  > >  >
>  > >  > my hardware is :    PII 350 128mb 30 Gb
>  > >  >                             3c905 ctx network / Matrox g200 AGP
>  > >  >                             kernel 2.4.2 with reiserfs
>  > >  >
>  > >  > the CI card is Aston 1.05 and 1.04 (both new and repeatedly tested)
>  > >  >
>  > >  > Anny help would be appreciated.
>  > >
>  > > It looks like those CI-CAM versions make the ARM application crash.
>  > > I think somebody reported the same happens with the newer Irdeto
>  > > CAMs. Sorry, I do not have the hardware (CAMs) to debug this.
>  > >
>  > > Does the error already occur if just the CAM is inserted or only if
>  > > also the smartcard is inserted?
>  > >
>  > > Ralph
>  >
>  > this error occurs during normal operation on my System. Inserting the
>  > smartcard or CI module produced no error. I am not sure, if it is
>  > related to the CAM-Module. It appears mostly when a recording (of an
>  > encrypted channel) has been started. But now I will try if this error
>  > appears only with encrypted channels.
>
> The outcommand errors just indicate that the ARM is no longer
> responding (it crashed) but do not tell you why.
> If it always crashes when the CAM is inserted it is of course obvious
> that one bug is somewhere in the CI code. This could be something as simple
> as an overflow when parsing a new previously unknown CIS or something more
> complicated. I'll have to see what happens when I get such a CAM.
>
> The crashes you have can be related to other bugs in the ARM application.
>
> So far I read that the following CAMs are causing instant crashes:
>
> Aston version 1.04 and 1.05
> Irdeto version 4.7
>
> Can somebody confirm this?
> What about other CAMs like the new EuroCIs?
>
> Ralph
>

    Conax CAM not causing crashes, but it is not working. After inserting CAM also FTA
channels are
    "Freezed" , after taking out the CAM all goes to normal without resetting ARM. It looks
like ARM CI
    code not correctly initializes Conax ???

Arvo




--- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.