[linux-dvb] Re: Siemens DVB-s and parameters

[Holger Waechtler <holger@convergence.de>]

Hi,

you have some serious hardware problems. Remove some of your cards, try 
other BIOS IRQ settings, try another slot for your DVB card.

If you have your kernel patched in any way or don't know where you got 
it from build a fresh one from the sources from http://www.kernel.org/

Holger



Auweiler, Rainer (RPS) wrote:
>>Hi,
>>
>>with Redhat 8.0 and Siemens DVB-s it's not easy to watch TV  !
>>After compiling the kernel 2.4.18-14 to have support for video4linux,
>>input core and event device a have 
>>now another fails with the card.
>>With 'make insmod' the following lines are shown:
>>
>>[root@localhost driver]# make insmod
>>/usr/src/linux/scripts/pathdown.sh: line 4: TOPDIR: parameter null or not
>>set
>>DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules)
>>make[1]: Wechsel in das Verzeichnis Verzeichnis "/usr/src/linux-2.4.18-14"
>>make -r -f tmp_include_depends all
>>make[2]: Wechsel in das Verzeichnis Verzeichnis "/usr/src/linux-2.4.18-14"
>>make[2]: Für das Target "all" gibt es nichts zu tun.
>>make[2]: Verlassen des Verzeichnisses Verzeichnis
>>"/usr/src/linux-2.4.18-14"
>>make -C  /usr/local/src/DVB/driver CFLAGS="-D__KERNEL__
>>-I/usr/src/linux-2.4.18-
>>14/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2
>>-fno-strict-aliasing -fn
>>o-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2
>>-march=i586 -DM
>>ODULE" MAKING_MODULES=1 modules
>>make[2]: Wechsel in das Verzeichnis Verzeichnis
>>"/usr/local/src/DVB/driver"
>>ld -m elf_i386 -r -o dvb-core.o dmxdev.o dvb_demux.o dvb_net.o dvb_i2c.o
>>dvb_fil
>>ter.o dvb_frontend.o dvbdev.o compat.o dvb_ksyms.o
>>make -C av7110 modules
>>make[3]: Wechsel in das Verzeichnis Verzeichnis
>>"/usr/local/src/DVB/driver/av711
>>0"
>>ld -m elf_i386 -r -o dvb-ttpci.o saa7146_core.o saa7146_v4l.o av7110.o
>>av7110_ir
>>.o
>>make[3]: Verlassen des Verzeichnisses Verzeichnis
>>"/usr/local/src/DVB/driver/av7
>>110"
>>make -C frontends modules
>>make[3]: Wechsel in das Verzeichnis Verzeichnis
>>"/usr/local/src/DVB/driver/front
>>ends"
>>make[3]: Für das Target "modules" gibt es nichts zu tun.
>>make[3]: Verlassen des Verzeichnisses Verzeichnis
>>"/usr/local/src/DVB/driver/fro
>>ntends"
>>make[2]: Verlassen des Verzeichnisses Verzeichnis
>>"/usr/local/src/DVB/driver"
>>make[1]: Verlassen des Verzeichnisses Verzeichnis
>>"/usr/src/linux-2.4.18-14"
>>
>>(                                               \
>>insmod videodev;                                \
>>                                \
>>insmod dvb-core.o dvb_shutdown_timeout=0;       \
>>make -C frontends insmod;                       \
>> make -C av7110 insmod; \
>>)
>>Using /lib/modules/2.4.18-14/kernel/drivers/media/video/videodev.o
>>/lib/modules/2.4.18-14/kernel/drivers/media/video/videodev.o: init_module:
>>Input
>>/output error
>>Hint: insmod errors can be caused by incorrect module parameters,
>>including inva
>>lid IO or IRQ parameters.
>>You may find more information in syslog or the output from dmesg
>>make[1]: Wechsel in das Verzeichnis Verzeichnis
>>"/usr/local/src/DVB/driver/
>>frontends"
>>insmod alps_bsru6.o;   insmod alps_bsrv2.o;   insmod alps_tdmb7.o;
>>insmod 
>>alps_tdlb7.o;   insmod grundig_29504-401.o;   insmod grundig_29504-491.o;
>>insmod ves1820.o;
>>make[1]: Verlassen des Verzeichnisses Verzeichnis
>>"/usr/local/src/DVB/driver/
>>frontends"
>>make[1]: Wechsel in das Verzeichnis Verzeichnis
>>"/usr/local/src/DVB/driver/
>>av7110"
>>insmod input; \
>>insmod evdev; \
>>insmod dvb-ttpci.o;
>>Using /lib/modules/2.4.18-14/kernel/drivers/input/input.o
>>/lib/modules/2.4.18-14/kernel/drivers/input/input.o: init_module: Device
>>or 
>>resource busy
>>Hint: insmod errors can be caused by incorrect module parameters,
>>including 
>>invalid IO or IRQ parameters.
>>
>>Here are my interrupts and IO's:
>>
>>[root@localhost root]# cat /proc/ioports
>>0000-001f : dma1
>>0020-003f : pic1
>>0040-005f : timer
>>0060-006f : keyboard
>>0070-007f : rtc
>>0080-008f : dma page reg
>>00a0-00bf : pic2
>>00c0-00df : dma2
>>00f0-00ff : fpu
>>0170-0177 : ide1
>>01f0-01f7 : ide0
>>0220-022f : soundblaster
>>02f8-02ff : serial(auto)
>>0330-0333 : MPU-401 UART
>>0376-0376 : ide1
>>0378-037a : parport0
>>037b-037f : parport0
>>03c0-03df : vga+
>>03f2-03f5 : floppy
>>03f6-03f6 : ide0
>>03f7-03f7 : floppy DIR
>>03f8-03ff : serial(auto)
>>0cf8-0cff : PCI conf1
>>e000-e0ff : LSI Logic / Symbios Logic (formerly NCR) 53c810
>>  e000-e07f : ncr53c8xx
>>e800-e80f : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
>>  e800-e807 : ide0
>>  e808-e80f : ide1
>>[root@localhost root]# cat /proc/irq
>>cat: /proc/irq: Ist ein Verzeichnis
>>[root@localhost root]# cat /proc/interrupts
>>           CPU0
>>  0:     479763          XT-PIC  timer
>>  1:       1071          XT-PIC  keyboard
>>  2:          0          XT-PIC  cascade
>>  4:      67994          XT-PIC  serial
>>  5:       5251          XT-PIC  soundblaster
>>  6:         48          XT-PIC  floppy
>>  8:          1          XT-PIC  rtc
>> 10:         14          XT-PIC  ncr53c8xx
>> 12:          0          XT-PIC  saa7146(0)
>> 14:      87235          XT-PIC  ide0
>> 15:         29          XT-PIC  ide1
>>NMI:          0
>>ERR:          0
>>
>>
>>What is to do with the card ?
>>
>>Please help a newbie.
>>
>>
>>Rainer
>>
> 
> 
> 



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.