Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: Problems with DVB-S TT Rev 2.1
dmesg:
Linux video capture interface: v1.00
DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
stv0299.c: setup for tuner BSRU6, TDQB-S00x
DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 80002616
DVB: AV7111(0) - firmware supports CI link layer interface
av7110(0): adac type set to 0
Ok?
I works. I can now receive channels and watch them with xawtv.
Is there a possibility to write back the correct configuration space
values (with setpci)?
Thanx.
Joachim
Oliver Endriss wrote:
> On Friday 01 August 2003 11:06, Joachim Herb wrote:
>
>>00:05.0 Class 0480: 1131:7146 (rev 01)
>> Flags: bus master, medium devsel, latency 32, IRQ 10
>> Memory at e2000000 (32-bit, non-prefetchable) [size=512]
>>00: 31 11 46 71 06 00 80 02 01 00 80 04 00 20 00 00
>>10: 00 00 00 e2 00 00 00 00 00 00 00 00 00 00 00 00
>>20: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff
>
> ^^^^^^^^^^^
> This is your sub-vendor/device id. :-(
>
>
>>30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 ff ff
>
>
> Obviously the eeprom of your card is broken or has been overwritten.
> sub-vendor id and device id are invalid.
>
> You could try to add a line
> { PHILIPS_SAA7146, 0xffff, 0xffff, CARD_INFO tt_2_1 },
> to the table at the end of saa7146_core.c
>
> Oliver
>
>
--
Joachim Herb
mailto:herb@leo.org
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.
Home |
Main Index |
Thread Index