Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] avermedia dvb-t
Hi,
I've just set up my avermedia dvb-t card using the 2.6-pre9 kernel
(gentoo-dev-sources) and the latest dvb CVS code, I'm in the uk.
I followed the guide in dvb-kernel and I think I have everything working,
however when I run 'scan -c' I get this:
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
Frontend can not do INVERSION_AUTO, trying INVERSION_OFF instead
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
dumping lists (0 services)
Done.
Here's the relevant lsmod info:
sp887x 22208 0
dvb_bt8xx 7680 0
bt878 11088 1 dvb_bt8xx
bttv 132864 3 dvb_bt8xx,bt878
video_buf 21600 1 bttv
i2c_algo_bit 9704 1 bttv
btcx_risc 4676 1 bttv
i2c_core 24580 3 dvb_bt8xx,bttv,i2c_algo_bit
v4l2_common 4512 1 bttv
videodev 9600 1 bttv
dvb_core 60064 2 sp887x,dvb_bt8xx
soundcore 9088 2 bttv,snd
And the messages from syslog:
Nov 12 00:35:03 phoenix kernel: Linux video capture interface: v1.00
Nov 12 00:35:03 phoenix kernel: bttv: driver version 0.9.12 loaded
Nov 12 00:35:03 phoenix kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Nov 12 00:35:03 phoenix kernel: bttv: Bt8xx card found (0).
Nov 12 00:35:03 phoenix kernel: PCI: Found IRQ 10 for device 0000:00:0e.0
Nov 12 00:35:03 phoenix kernel: PCI: Sharing IRQ 10 with 0000:00:0e.1
Nov 12 00:35:03 phoenix kernel: bttv0: Bt878 (rev 17) at 0000:00:0e.0,
irq: 10, latency: 32, mmio: 0xef000000
Nov 12 00:35:03 phoenix kernel: bttv0: subsystem: 1461:0761 (UNKNOWN)
Nov 12 00:35:03 phoenix kernel: please mail id, board name and the correct
card= insmod option to kraxel@bytesex.org
Nov 12 00:35:03 phoenix kernel: bttv0: using: *** UNKNOWN/GENERIC ***
[card=0,autodetected]
Nov 12 00:35:03 phoenix kernel: bttv0: using tuner=-1
Nov 12 00:35:03 phoenix kernel: bttv0: i2c: checking for MSP34xx @ 0x80...
not found
Nov 12 00:35:03 phoenix kernel: bttv0: i2c: checking for TDA9875 @ 0xb0...
not found
Nov 12 00:35:03 phoenix kernel: bttv0: i2c: checking for TDA7432 @ 0x8a...
not found
Nov 12 00:35:03 phoenix kernel: bttv0: registered device video0
Nov 12 00:35:03 phoenix kernel: bttv0: registered device vbi0
Nov 12 00:35:23 phoenix kernel: bt878: AUDIO driver version 0.0.0 loaded
Nov 12 00:35:23 phoenix kernel: bt878: Bt878 AUDIO function found (0).
Nov 12 00:35:23 phoenix kernel: PCI: Found IRQ 10 for device 0000:00:0e.1
Nov 12 00:35:23 phoenix kernel: PCI: Sharing IRQ 10 with 0000:00:0e.0
Nov 12 00:35:23 phoenix kernel: bt878(0): Bt878 (rev 17) at 00:0e.1, irq:
10, latency: 32, memory: 0xee800000
Nov 12 00:35:43 phoenix kernel: attach: checking "bt878 #0 [sw]"
Nov 12 00:35:43 phoenix kernel: find by pci: checking "bt878 #0 [sw]"
Nov 12 00:35:43 phoenix kernel: attach: "bt878 #0 [sw]", to card 0
Nov 12 00:35:43 phoenix kernel: DVB: registering new adapter (Ave).
Nov 12 00:36:05 phoenix kernel: DVB: registering frontend 0:0 (Microtune
MT7072DTF)...
and finally lspci:
00:0e.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
Subsystem: Avermedia Technologies Inc: Unknown device 0761
00:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
Subsystem: Avermedia Technologies Inc: Unknown device 0761
If anyone could point me in the right direction to sort this out I'd be
very appreciative.
Once I have the card working I intend to write a How-To for UK dvb-t
users.
Thanks,
Rob
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.
Home |
Main Index |
Thread Index