[linux-dvb] Re: Nebula DigiTV and nxt6000 problems

["Robert Cook" <robert@softek.com.au>]

How do I identify what tuner type I physically have? Here is the output
the debug=1

#dmesg
Linux video capture interface: v1.00
bttv: driver version 0.9.12 loaded
bttv: snapshot date 2004-01-21
bttv: using 4 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 02:0b.0, irq: 23, latency: 64, mmio: 0xfbefc000
bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID
is 0071:0101
bttv0: using: Nebula Electronics DigiTV [card=104,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ff37cb [init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (1).
bttv1: Bt878 (rev 17) at 02:0a.0, irq: 22, latency: 64, mmio: 0xfbefe000
bttv1: subsystem: 1461:0761 (UNKNOWN)
please mail id, board name and the correct card= insmod option to
kraxel@bytesex.org
bttv1: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=009c004d [init]
bttv1: using tuner=-1
bttv1: i2c: checking for MSP34xx @ 0x80... not found
bttv1: i2c: checking for TDA9875 @ 0xb0... not found
bttv1: i2c: checking for TDA7432 @ 0x8a... not found
bttv1: registered device video1
bttv1: registered device vbi1
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 17) at 02:0b.1, irq: 23, latency: 64, memory:
0xfbefd000
bt878: Bt878 AUDIO function found (1).
bt878(1): Bt878 (rev 17) at 02:0a.1, irq: 22, latency: 64, memory:
0xfbeff000
DVB: registering new adapter (Neb).
DVB: registering new adapter (Ave).
nxt6000: init
nxt6000: attach
nxt6000: detected TI ALP510 tuner at 0xC0
nxt6000: attached at 0:0
DVB: registering frontend 0:0 (NxtWave NXT6000)...
nxt6000: nxt6000_read error (.addr = 0x18, reg: 0x73, ret: -5)
nxt6000: nxt6000_read error (.addr = 0x24, reg: 0x73, ret: -5)
nxt6000: nxt6000_read error (.addr = 0x28, reg: 0x73, ret: -5)
nxt6000: attach
nxt6000: nxt6000_read error (.addr = 0x14, reg: 0x73, ret: -5)
nxt6000: nxt6000_read error (.addr = 0x18, reg: 0x73, ret: -5)
nxt6000: nxt6000_read error (.addr = 0x24, reg: 0x73, ret: -5)
nxt6000: nxt6000_read error (.addr = 0x28, reg: 0x73, ret: -5)

Robert

-----Original Message-----
From: linux-dvb-bounce@linuxtv.org [mailto:linux-dvb-bounce@linuxtv.org]
On Behalf Of Holger Waechtler
Sent: Tuesday, 27 January 2004 1:07 AM
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Re: Nebula DigiTV and nxt6000 problems


Robert Cook wrote:
> Look like the driver is loading and registering the frontend but no 
> joy using ztap.
> 
> Robert
> 
> #dmesg
> i2c-core.o: i2c core module version 2.8.1 (20031005)
> Linux video capture interface: v1.00
> bttv: driver version 0.9.12 loaded
> bttv: snapshot date 2004-01-21
> bttv: using 4 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> bttv0: Bt878 (rev 17) at 02:0b.0, irq: 23, latency: 64, mmio: 
> 0xfbefc000
> bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem
ID
> is 0071:0101
> bttv0: using: Nebula Electronics DigiTV [card=104,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00ff48cb [init]
> bttv0: using tuner=-1
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: PLL: 28636363 => 35468950 .. ok
> bttv: Bt8xx card found (1).
> bttv1: Bt878 (rev 17) at 02:0a.0, irq: 22, latency: 64, mmio:
0xfbefe000
> bttv1: subsystem: 1461:0761 (UNKNOWN)
> please mail id, board name and the correct card= insmod option to
> kraxel@bytesex.org
> bttv1: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
> bttv1: gpio: en=00000000, out=00000000 in=009c004d [init]
> bttv1: using tuner=-1
> bttv1: i2c: checking for MSP34xx @ 0x80... not found
> bttv1: i2c: checking for TDA9875 @ 0xb0... not found
> bttv1: i2c: checking for TDA7432 @ 0x8a... not found
> bttv1: registered device video1
> bttv1: registered device vbi1
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> bt878(0): Bt878 (rev 17) at 02:0b.1, irq: 23, latency: 64, memory:
> 0xfbefd000
> bt878: Bt878 AUDIO function found (1).
> bt878(1): Bt878 (rev 17) at 02:0a.1, irq: 22, latency: 64, memory:
> 0xfbeff000
> DVB: registering new adapter (Neb).
> DVB: registering new adapter (Ave).
> DVB: registering frontend 0:0 (NxtWave NXT6000)...

Can you please load the nxt6000.o module with parameter debug=1? Then 
you get a message which should tell you what tunertype is used. Please 
check that this is the right one.

Holger



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe
linux-dvb" as subject.



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.