[linux-dvb] Terratec Cinergy 1200 does not work

[Fabian Niestroj <olfab@web.de>]

Hi.
I try to set up DVB-s. The Cinergy card employs the Philips SAA7146AH and 
SU1278/SHA. As far as I know these chips are supported. I run SuSE Linux 9.1. 
A rpm based on version 1.1.0 of the linux dvb driver is included.
Here is what I did so far:
I started dvb by typing "rcdvb start". The script returned "done". And "rcdvb 
status" returned "running".

/var/log/messages:
oliver kernel: saa7146: register extension 'dvb'

lsmod | grep dvb: 
dvb_bt8xx               7300  0
dvb_ttpci              72716  0
dvb_core               55316  16 ves1x93, ves1820, tda1004x, stv0299, sp887x, 
nxt6000, mt312, grundig_29504_491, grundig_29504_401, dst, cx24110, at76c651, 
alps_tdmb7, alps_tdlb7, dvb_bt8xx,dvb_ttpci
bt878                  11060  2 dst,dvb_bt8xx
bttv                  143500  2 dvb_bt8xx,bt878
saa7146_vv             45184  1 dvb_ttpci
saa7146                18084  2 dvb_ttpci,saa7146_vv
firmware_class          9472  1 dvb_ttpci
ttpci_eeprom            2816  1 dvb_ttpci
i2c_core               23940  4 dvb_bt8xx,bttv,i2c_algo_bit,ir_kbd_i2c

szap -r -n 2:
reading channels from file '/root/.szap/channels.conf'
zapping to 2 'ZDF':
sat 0, frequency = 11954 MHz H, symbolrate 27500000, vpid = 0x006e, apid = 
0x0078
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
opening frontend failed: No such device

Why does it not work? I think the frontend driver is stv0299. And the module 
is loaded.

Thanks for your help,
Fabian