Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linux-dvb] Re: [PATCH] dvb_bt8xx: sub_device



----- Original Message -----
From: Markus Germeier <mager@tzi.de>
To: <linux-dvb@linuxtv.org>
Sent: Sunday, August 15, 2004 12:02 AM
Subject: [linux-dvb] Re: [PATCH] dvb_bt8xx: sub_device


> Hi,
>
> thanks for the quick answer.
>
> > Anyway if you add -v and post the logs we'll se what's (not) happening
>
> Here we go:
>
> ->mplayer -v dvb://ZDF
> MPlayer 1.0pre5-3.3.3 (C) 2000-2004 MPlayer Team
>
> CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 1660 MHz (Family: 6,
Stepping: 0)
> Detected cache-line size is 64 bytes
> CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
> Reading config file /etc/mplayer/mplayer.conf
> Reading config file /home/mager/.mplayer/config
> Reading /home/mager/.mplayer/codecs.conf: Can't open
'/home/mager/.mplayer/codecs.conf': No such file or directory
> Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf':
No such file or directory
> Using built-in default codecs.conf.
> CommandLine: '-v' 'dvb://ZDF'
> init_freetype
> get_path('font/font.desc') -> '/home/mager/.mplayer/font/font.desc'
> font: can't open file: /home/mager/.mplayer/font/font.desc
> Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
> Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
> Using Linux hardware RTC timing (1024Hz).
> get_path('input.conf') -> '/home/mager/.mplayer/input.conf'
> Can't open input config file /home/mager/.mplayer/input.conf: No such file
or directory
> Can't open input config file /etc/mplayer/input.conf: No such file or
directory
> Falling back on default (hardcoded) input config
> Opening joystick device /dev/input/js0
> Can't open joystick device /dev/input/js0 : Permission denied
> Can't init input joystick
> Setting up LIRC support...
> mplayer: could not open config file
> mplayer: No such file or directory
> Failed to read LIRC config file ~/.lircrc.
> You will not be able to use your remote control.
> get_path('ZDF.conf') -> '/home/mager/.mplayer/ZDF.conf'
>
> Playing dvb://ZDF.
> TUNER TYPE SEEMS TO BE DVB-T
> get_path('channels.conf.ter') -> '/home/mager/.mplayer/channels.conf.ter'
> get_path('channels.conf') -> '/home/mager/.mplayer/channels.conf'
> CONFIG_READ FILE: /home/mager/.mplayer/channels.conf, type: 2
> TER, NUM: 0, NUM_FIELDS: 12, NAME: arte, FREQ: 482000000 PIDS:  201  202
0
> TER, NUM: 1, NUM_FIELDS: 12, NAME: Phoenix, FREQ: 482000000 PIDS:  301
302  0
> TER, NUM: 2, NUM_FIELDS: 12, NAME: NDR RB, FREQ: 482000000 PIDS:  518  519
0
> TER, NUM: 3, NUM_FIELDS: 12, NAME: Das Erste RB, FREQ: 482000000 PIDS:
261  262  0
> TER, NUM: 4, NUM_FIELDS: 12, NAME: ZDF, FREQ: 562000000 PIDS:  545  546  0
> TER, NUM: 5, NUM_FIELDS: 12, NAME: Info 3sat, FREQ: 562000000 PIDS:  561
562  0
> TER, NUM: 6, NUM_FIELDS: 12, NAME: Doku KiKa, FREQ: 562000000 PIDS:  593
594  0
> TER, NUM: 7, NUM_FIELDS: 12, NAME: RTL Television, FREQ: 642000000 PIDS:
337  338  0
> TER, NUM: 8, NUM_FIELDS: 12, NAME: RTL2, FREQ: 642000000 PIDS:  353  354
0
> TER, NUM: 9, NUM_FIELDS: 12, NAME: Super RTL, FREQ: 642000000 PIDS:  369
370  0
> TER, NUM: 10, NUM_FIELDS: 12, NAME: VOX, FREQ: 642000000 PIDS:  545  546
0
> TER, NUM: 11, NUM_FIELDS: 12, NAME: SAT.1, FREQ: 698000000 PIDS:  385  386
0
> TER, NUM: 12, NUM_FIELDS: 12, NAME: N24, FREQ: 698000000 PIDS:  225  226
0
> TER, NUM: 13, NUM_FIELDS: 12, NAME: ProSieben, FREQ: 698000000 PIDS:  305
306  0
> TER, NUM: 14, NUM_FIELDS: 12, NAME: KABEL1, FREQ: 698000000 PIDS:  161
162  0
> DVB_CONFIG, can't open device /dev/dvb/adapter1/frontend0, skipping
> DVB_CONFIG, can't open device /dev/dvb/adapter2/frontend0, skipping
> DVB_CONFIG, can't open device /dev/dvb/adapter3/frontend0, skipping
> OPEN_DVB: prog=ZDF, card=1, type=2, vid=0, aid=0
> code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
> Released under the GPL.
> Latest version available from http://www.linuxstb.org/
> PROG: ZDF, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null)
> PROGRAM NUMBER 4: name=ZDF, freq=562000000
> DVB_OPEN_DEVICES(3)
> OPEN(0), file /dev/dvb/adapter0/demux0: FD=7, CNT=0
> OPEN(1), file /dev/dvb/adapter0/demux0: FD=8, CNT=1
> OPEN(2), file /dev/dvb/adapter0/demux0: FD=9, CNT=2
> DVB_SET_CHANNEL: new channel name=ZDF, card: 0, channel 4
> DIFFERENT TUNING THAN THE PREVIOUS:   -> 0|562000000|2|0|1|1|1|0
> dvb_tune Freq: 562000000
> TUNE_IT, fd_frontend 6, fd_sec 0
> freq 562000000, srate 1701996900, pol Using DVB card "DVB-T Zarlink MT352
demodulator driver"
> tuning DVB-T (in United Kingdom) to 562000000 Hz, bandwidth: 0
> polling....
> Getting frontend event
> FE_STATUS:
> polling....
> polling....
> polling....
> [...]
>
>

as Kenneth wrote it seems that the getstatus ioctl() is not working as
expected, but here even poll() (waiting for data available) and read()
are failing





Home | Main Index | Thread Index