[vdr] Re: Today's CVS driver

[Usenet-372111@zocki.toppoint.de (Rainer Zocholl)]

no-return@gmx.net(Thomas Koch)  20.09.01 20:33



>Sep 20 20:23:09 video vdr[5140]: switching to channel 5
>Sep 20 20:23:10 video vdr[5140]: ERROR (dvbapi.c,3238): Invalid
>argument Sep 20 20:23:10 video vdr[5145]: LIRC remote control thread
>started (pid=5145)
>Sep 20 20:23:10 video vdr[5140]: SVDRP listening on port 2001
>Sep 20 20:23:10 video vdr[5140]: setting watchdog timer to 60 seconds
>Sep 20 20:23:13 video vdr[5140]: switching to channel 6
>Sep 20 20:23:13 video vdr[5140]: ERROR (dvbapi.c,3238): Invalid
>argument Sep 20 20:23:14 video vdr[5140]: ERROR: timeout while tuning
>Sep 20 20:23:14 video vdr[5140]: ERROR: channel 6 not sync'ed on DVB
>card 1!
>Sep 20 20:23:14 video vdr[5140]: panic level: 0
>Sep 20 20:23:14 video vdr[5140]: retrying
>Sep 20 20:23:14 video vdr[5140]: ERROR (dvbapi.c,3238): Invalid
>argument Sep 20 20:23:19 video vdr[5140]: ERROR: timeout while tuning

did not work here either, but did not get these errors...
(Hm, where did i hear that already ;-) )

The driver loads and tunes to NTV as should be.

But  vdr starts, shows one times the OSD EPG info, but 
on a black screen, that stays black.
Pressing RC, Menu came up but board gets reset soon after


3:23 msi vdr[1068]: VDR version 0.95 started
3:23 msi vdr[1068]: loading /video/setup.conf
3:23 msi vdr[1068]: loading /video/channels.conf
3:23 msi vdr[1068]: loading /video/timers.conf
3:23 msi vdr[1068]: loading /video/commands.conf
3:23 msi vdr[1068]: probing /dev/ost/frontend0
3:23 msi vdr[1070]: EIT processing thread started (pid=1070) - master
3:23 msi vdr[1068]: probing /dev/ost/frontend1
3:23 msi vdr[1071]: EIT processing thread started (pid=1071)
3:23 msi vdr[1068]: probing /dev/ost/frontend2
3:23 msi vdr[1068]: found 2 video devices
3:23 msi vdr[1068]: setting primary DVB to 1
3:23 msi vdr[1068]: switching to channel 4
3:23 msi kernel: lirc_serial: Interrupt 4, port 03f8 obtained
3:23 msi vdr[1072]: LIRC remote control thread started (pid=1072)
3:23 msi vdr[1068]: SVDRP listening on port 2001
3:23 msi vdr[1068]: setting watchdog timer to 60 seconds
3:28 msi vdr[1068]: assuming manual start of VDR
3:29 msi vdr[1068]: max. latency time 1 seconds
4:58 msi vdr[1068]: switching to channel 5
4:59 msi vdr[1068]: panic level: 0
5:09 msi last message repeated 2 times
5:09 msi vdr[1068]: max. latency time 11 seconds
5:09 msi vdr[1068]: switching to channel 6
5:14 msi vdr[1068]: panic level: 0
5:24 msi last message repeated 2 times
5:24 msi vdr[1068]: max. latency time 15 seconds


An other effect:

dvb-20010920
Compiles but do not run.
..
make[2]: Entering directory `/root/video/dvb-20010920/apps/tuxzap'
make[2]: *** No targets specified and no makefile found.  Stop.
make[2]: Leaving directory `/root/video/dvb-20010920/apps/tuxzap'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/root/video/dvb-20010920/apps'
make: *** [dvb] Error 2



dvb-20010914
do not compile but runs... ;-)

make[2]: Leaving directory `/root/video/dvb-20010914/libdvb/src/si'
g++ -I./include -I./src -I. -I../driver -I../ost/include -O2 -Wall -g -c
devices.cc
In file included from devices.hh:14,
                 from devices.cc:1:
                 DVB.hh:90: field `qpsk' has incomplete type
                 DVB.hh:91: field `qam' has incomplete type
                 make[1]: *** [devices.o] Error 1
                 make[1]: Leaving directory `/root/video/dvb-20010914/libdvb'
                 make: *** [dvb] Error 2