[vdr] Re: AW: Compiling problem

["Uwe" <linux_dvb@uni.de>]

>----- Original Message -----
>From: "Uwe Ortner" <uwe.ortner@classic-net.de>
>
>Hello Jochen,
>
>thanks for the link. Now I can compile vdr without errors :-))
>
>As soon as I start vdr (./vdr -v /video) I get
>this message:
>##############
>vdr[1815]: loading /video/channels.conf
>vdr[1815]: loading /video/keys-pc.conf
>vdr[1815]: can't open '/video/keys-pc.conf'
>vdr[1815]: probing /dev/ost/frontend0
>vdr[1817]: EIT processing thread started (pid=1817) - master
>vdr[1815]: probing /dev/ost/frontend1
>vdr[1815]: found 1 video device
>vdr[1815]: setting primary DVB to 1
>vdr[1815]: SVDRP listening on port 2001
>vdr[1815]: learning keys
>
>Seems to be ok - but my TV-Screen turns black
>
>I've copied the channels.conf.cable to /video/channels.conf
>(but not the keys-pc.conf - due to learn my own settings)
>
>My TV is connected via the SCART cable
>
>Is there a flag for using SCART instead of YC?
>

this is a bug of a DVB-Driver! (only Siemens-DVB-C-Card)

use Driver:
ftp://ftp.cadsoft.de/pub/people/kls/vdr/siemens_dvb-0.9-20010921.tgz


MFG ....Uwe


>Regards
>Uwe
>
>
>Am Son, 2002-01-13 um 12.23 schrieb Jochen Vieten:
>> Hi,
>>
>> your dvb driver is too old.
>>
>> I'm using this one:
>>
>> ftp://ftp.cadsoft.de/pub/people/kls/vdr/siemens_dvb-0.9-20011117.tgz
>>
>> Daily driver snapshots:
>>
>> http://www.linuxdvb.tv/download.html
>>
>> Have fun,
>>
>> Jochen
>>
>> -----Ursprüngliche Nachricht-----
>> Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]Im Auftrag
>> von Uwe Ortner
>> Gesendet: Sonntag, 13. Januar 2002 11:58
>> An: VDR
>> Betreff: [vdr] Compiling problem
>>
>>
>> Hello,
>>
>> compiling VDR results in a message:
>> ###################################
>> g++ -g -O2 -Wall -Woverloaded-virtual -m486 -c -DREMOTE_KBD
>> -D_GNU_SOURCE -I../DVB/ost/include config.c
>> In file included from config.h:17,
>>                  from config.c:10:
>> dvbapi.h:107: syntax error before `;'
>> make: *** [config.o] Error 1
>>
>> I use this packages (SuSE 7.3,2.4.10-4GB):
>> ##########################################
>> libdvdcss-1.0.0.tar.gz
>> libdvdread-0.9.2.tar.gz
<> siemens_dvb-0.9.3.tar.gz
>> vdr-0.99pre1-mp3-0.31.tar.gz
>>
>> My installation steps:
>> ######################
>> cp /boot/vmlinuz.config /usr/src/linux/.config
>> cp /boot/vmlinuz.autoconf.h /usr/src/linux/include/linux/autoconf.h
> cp /boot/vmlinuz.version.h /usr/src/linux/include/linux/version.h
> make oldconfig
> make menuconfig (serial as modul; reiser build in kernel)
> make dep clean bzImage modules modules_install bzlilo
> init 6
>
> extracting siemens_dvb-0.9.3.tar.gz       to /opt
> extracting vdr-0.99pre1-mp3-0.31.tar.gz   to /opt
>
> Because I know DVD support can cause some trouble I did not install
> libdvd***
>
> cd /opt/DVD/driver
> make
> make insmod
>
> Output from /var/log/messages:
> ##############################
> i2c-core.o: i2c core module
> i2c-core.o: driver VES1893 DVB demodulator registered.
> i2c-core.o: driver VES1820 DVB demodulator registered.
> i2c-core.o: driver L64781 DVB demodulator registered.
> L64781: init done
> i2c-core.o: driver tda8083 DVB demodulator registered.
> i2c-core.o: driver stv0299 DVB demodulator registered.
> i2c-core.o: driver i2c TV tuner driver registered.
> saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xd0911e00.
> VES1820: attaching VES1820 at 0x12
> i2c-core.o: client [VES1820] registered to adapter [saa7146(1)](pos. 0).
> VES1820: attached to adapter saa7146(1)
> tuner: chip found @ 0x61
> i2c-core.o: client [i2c tv tuner chip] registered to adapter
> [saa7146(1)](pos. 1).
> i2c-core.o: adapter saa7146(1) registered as adapter 0.
> dvb0: AV7111 - firm f0240009, rtsl b0250018, vid 71010068, app 00010002
> dvb0: DVB-C analog module detected, initializing MSP3400
> dvb: 1 dvb(s) found
>
> Until this point everything is fine and I can see a TV-channel with my
> Siemens DVB-C card (analog modul / with CI Interface - Irdeto is not
> plugged)
>
> I also tried different mixes from vdr/dvb packages (as seen on Klaus
> Homepage / linuxtv.org) but its the same result
>
> Any ideas?
>
> Help is highly appreciated
>
> Regards Uwe
>
> BTW: How to I apply the "diff" file from Klaus Homepage?
>      I tried "patch -p0 < filename" in the DVB/driver directory but I
> got an error message
>
>
>
>
>
>
>
>
>
>