Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] AW: Re: AW: Re: Volume level in vdr
OK :)
I try it again ;-)
My problem is as follows:
I have my tv connected with the composite out and the stereo out to my
tv.
I use a DVB-s under Win with Multidec 8.0 and WinDVBLive. With both
progs the Volume level is "normal".
Under Linux with vdr 0.99 and siemens-0.9.4 (also 0.9.3) driver, the
sound is very quiet (as i said before noises are nearly louder that the
signal).
In my setup.conf CurrentVolume is 255.
So please what am i doing wrong?
I have a 2.1 rev TT DVB-s.
Cu Ulrich
> -----Ursprüngliche Nachricht-----
> Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]
> Im Auftrag von Rainer Zocholl
> Gesendet: Donnerstag, 28. Februar 2002 23:11
> An: vdr@linuxtv.org
> Betreff: [vdr] Re: AW: Re: Volume level in vdr
>
>
> ulope@gmx.de(Ulrich Petri) 25.02.02 05:29
>
> Once upon a time Ulrich Petri shaped the electrons to say...
>
> >> You know that VDR allows Volume Control too?
> >>
> >> If this is set to a low level, you may have the effect, that VDR
> >> is so quiet.
>
> >Yes i know ;)
> So why don't you reduce it? ;-)
>
>
> >> The other cause may be that you are using the wrong outputs of your
> >> sound card ("speaker") to connect to your amp.
> >> IOW: The Windows Crap is MUUUUCH too loud!
> >>
> >> You should use the "line out".
>
> >I'm actually using the "onboard" audio out of the DVB-Card
>
> And under windows you got from this plug -lot- more volume
> than running under linux VDR???
>
> Please describe exactly what you do. Step by step.
> I think we are talking about two different things.
>
> >> grep CurrentVolume /video*/setup.conf
> >>
> >> deliver?
> >>
> >> Here it's:
> >> CurrentVolume = 215
> >>
>
> >CurrentVolume = 255
>
> So:
> shut down vdt (killall vdr)
>
> edit /video*/setup.conf setting it to 215, for example.
>
> That's a good value for me...(and my neighbours ;-))
>
>
>
> >> Learn that windows is NOT the "reference".
> >>
>
> >No but under win the volume level is "normal" under linux the noises
> >are allmost louder that the actual signal.
>
> Emm, which DVB-card do you use?
>
> Did you tell the driver to use the right DAC?
>
>
>
Home |
Main Index |
Thread Index