Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: AW: [Announce] nvram-wakeup-0.04
high!
On Sun, 24 Mar 2002, Matthias Queisler (MQ) wrote:
MQ> I entered a value 3 Minutes in the future but nvram-wakeup told me not to
MQ> take time less then 10 Minutes in the future.
because of WAKEUP_BEFORE and WAKEUP_BEFORE values...
MQ> So I rewrote a new time 11 minutes in the future. nvram told me to
MQ> reboot so the settings will take affect.
with mb=2 this is only needed if changing the status bit (en-/disable
wakeup)
MQ> And so I did, but now the BIOS told me "checksum error. loading
MQ> defaults."
Hmm, I would suggest to compile with ACTUALLY_WRITE=OFF, call nvram-wakeup
with a time, say (as you tried) 11 minutes in the future and write down
all values nvram-wakeup _would_ write into nvram. Then go into BIOS setup
and set the same date and time manually. Then run nvram-wakuep without
options and compare the values from nvram (wich were set by the BIOS
setup) with those you wrote down previously.
MQ> I got a Elitegroup K7VZA so MB=2 must be right.
MQ> What was wrong?
you also could send me the output of both runs.
c ya
Sergei
--
--------------------------------------------------------------------
eMail: Sergei.Haller@math.uni-giessen.de
--------------------------------------------------------------------
Be careful of reading health books, you might die of a misprint.
-- Mark Twain
Home |
Main Index |
Thread Index