[vdr] Re: autopid-patch for vdr 1.1.29

[Andreas Schultz <aschultz@warp10.net>]

Gerhard Steiner wrote:

> Hello,
> I tried the latest autopid-patch and it works quite fine
> for DVB-c. Thanks.
> As always there are some problems:
> 
> - the name of the channel is now taken from the stream.
> Unfortunately my provider calls e.g. ORF 1 "ORF 1 >ORF1".
> Would it be possible to take the name from the
> channels.conf again?

This should be selectable through setup options which will come later.

> - the patch breaks the epg data. If the data for the
> channels is taken from the stream there is no more
> epg-data.

You probably start with an incomplete channels.conf and the update then 
breaks the relation between EPG data and the channel. Fix your 
channels.conf to include correct Tid and Nid or save the updated 
channels and restart vdr (Saving the channels.conf can be forced by 
editing a channel!).

> - When returning from the mplayer-plugin, sometimes the
> screen stays black, sometimes the sound has gone. After
> switch from the channel and back again, most of the time
> everything is fine again.
> Here is the screen dump when returning from mplayer and
> screen is black (sound is ok)
> 
> MPlayer interrupted by signal 15 in module: decode_video
> ShutDownFilters
> ShutDownFilters
> setting pid 0 to 2050

can't compare with the source right now, but on the pid's (most likely 
vpid) is not beeing set, this usally happens when vdr thinks that this 
pid has already been set. Most probable cause is a missing DelPid() 
somewhere, and most likely a DelPid for the PcrPid it is.

Andreas



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.