[vdr] Back slot hauppage DVB-S versus DVB-C

[Stefaan Coddé <stefaan.codde@pandora.be>]

I've just ordered a hauppauge DVB-C (cable) card but am making the
chassis for the
computer at this moment.

Are the connections on the back slot identical to the DVB-S card
concerning the placement
of the connectors?

Stefaan



-----Oorspronkelijk bericht-----
Van: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org] Namens Onno
Verzonden: zaterdag 3 mei 2003 16:53
Aan: vdr@linuxtv.org
Onderwerp: [vdr] Re: PATCH: vdradmin-0.24-pre6 and autopid


Hi Andreas,

i dont know why, but the patch fails, it is easy to fix by hand. On line
386 the following does not work:
-      service_id   => $service_id
+      service_id   => $service_id,
+      nid	   => $nid,
+      tid	   => $tid

The patch also works for vdradmin-0.23, with the same reject, but no
trouble on that either.

But, vdradmin-0.24-pre6 looks very disorted on a 800 pixel resolution,
one has to scroll sideways, and thats quite difficult without keyboard,
also the new gxf is too bright if one uses vdradmin on a tv-out (thus
800 is maximum, while 640 would 
give a clearer view...), perhaps consider that before making it a
release...

Besides that, i consider vdr incomplete without its admin :-))))) And to
make one more real compliment: I start to forget when my loved series
run, since your vdradmin takes care of putting it on my disk and leaving
me with the best viewing pleasure !

regards Onno Kreuzinger




Andreas Kool schrieb:
> Hi Tom,
> 
> the following patch enables vdradmin-0.24-pre6 to be used with 
> vdr-1.1.29-autopid-2
> 
>
---8<-----if--you--cut--here--you--will--probably--destroy--your--monito
r---
> --- vdradmind.pl.orig	2003-04-30 14:34:54.000000000 +0200
> +++ vdradmind.pl	2003-05-03 14:46:48.000000000 +0200
> @@ -377,7 +377,7 @@
>      chomp;
>      my($vdr_id, $temp) = split(/ /, $_, 2);
>      my($name, $frequency, $polarization, $source, $symbolrate, $vpid,
$apid,
> -      $tpid, $ca, $service_id) = split(/\:/, $temp);
> +      $tpid, $ca, $service_id, $nid, $tid) = split(/\:/, $temp);
>      push(@CHAN, {
>        vdr_id       => $vdr_id,
>        name         => $name,
> @@ -389,7 +389,9 @@
>        apid         => $apid,
>        tpid         => $tpid,
>        ca           => $ca,
> -      service_id   => $service_id
> +      service_id   => $service_id,
> +      nid	   => $nid,
> +      tid	   => $tid
>      });
>    }
>  }
> @@ -402,9 +404,9 @@
>  				return($channel->{vdr_id});
>  			}
>  		}
> -	} elsif($channel_id =~ /^(.*)-.*-(.*)-(.*)$/) {
> +	} elsif($channel_id =~ /^(.*)-(.*)-(.*)-(.*)$/) {
>  		for my $channel (@CHAN) {
> -			if($channel->{source} eq $1 &&
$channel->{frequency} == $2 && $channel->{service_id} == $3) {
> +			if($channel->{source} eq $1 && $channel->{nid}
== $2 && 
> +$channel->{tid} == $3 && $channel->{service_id} == $4) {
>  				return($channel->{vdr_id});
>  			}
>  		}
> ---8<-----if--you--cut--here--you--will--probably--destroy--your--moni
> tor---
> 
> Ciao,
> Andreas
> --
> Andreas Kool (akool@akool.de * akool@isdn4linux.de * 
> http://www.akool.de)
> PGP: 3FBF2411 Fingerprint: B5 35 34 74 25 60 2A 7A  89 06 92 C4 08 BA
A5 BD
> (To get my PGP key, send me a mail with subject "send pgp key")
> 		X <-- Nail here for a new Monitor
> Transmission of this message via the Microsoft Network is prohibited
> 
> 




-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr"
as subject.







-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.