[vdr] Re: AW: Re: analogtv-0.5.0 & vdr-1.1.30 problem

[Uwe Ortner <uwe.ortner@classic-net.de>]

Am Mit, 2003-05-07 um 23.27 schrieb Uwe Ortner:
> Am Mit, 2003-05-07 um 10.15 schrieb Alexander Damhuis:
> > Hmm .. I was the lucky one living near to Andreas Kool (FFM), so the
> > IESY Channels worked. What you could probably do is ./scantv -c
> > /dev/videoX > channels.analog and then sort it out manually. The freqs
> > in there are e.g. 192.25 WDR and this should result in 192250 in the
> > channels.conf.
> > 
> > Anyone else a better idea (Andreas?). Or, if you already have a
> > channellist for Xawtv, it is stored under .xawtv in your home (or
> > ~/.xawtv).
> > 
> > Alex
> > 
> > > seems to be fine when started from the command line as "./vdr -P
> > > analogtv"
> > > 
> > 
> > BTW: someone from Munich who can provide a working channels.conf with
> > analogue entries?
> > maybe this is the problem
> > 
> > Uwe
> > 
> 
> I dont know what else I can do ...
> 
> xawtv -c /dev/video0  shows the channels on the analog card
> xawtv -c /dev/video1  shows the channels on the DVB card
> 
> I think this is working as it should
> 
> afterwards I scan the analog card
> scantv -c /dev/video0
> 
> this shows me i.e.
> E5   (175.25 MHz): ORF 2
> [ORF 2]
> channel = E5
> 
> so I put in the channels.conf
> ORF 2:1752500:M64:C:0:190:90:0:32001:10:0:0:0
> 
> put as soon as I switch to this channel the screen becomes black, and I
> can see this errorlog message:
> "tuner: TV freq (17525.00) out of range (44-958)"
> 
> What I`m doing wrong?
> uwe

missreading ...
i changed the line to "ORF 2:175250:M64:C:0:190:90:0:32001:10:0:0:0"

still no picture



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.