[vdr] Re: CAM-Error: Read failed

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Patrick Maier wrote:
> 
> Hi,
> I've tested the new vdr-1.1.32 with the driver linux-dvb.2003-05-10
> All works fine but on encrypted channels video and audio is fine for about
> 1 or 2 minutes and then the video and audio stopps for about 15 seconds
> and then video and audio resumes for another 1 or 2 minutes and then
> stopps again.....
> 
> on the syslog there are entries:
> May 19 22:56:28 dago vdr[1824]: ERROR: CAM: Read failed: slot 0, tcid 1
> May 19 22:56:38 dago vdr[1824]: CAM: Irdeto SE       , 01, 0602, 1702
> May 19 22:57:30 dago vdr[1824]: ERROR: CAM: Read failed: slot 0, tcid 1
> May 19 22:57:41 dago vdr[1824]: CAM: Irdeto SE       , 01, 0602, 1702
> ...
> 
> then I've enabled debugging like described in the cams.txt and thats the
> output when the video stopps:
> 
> http://www.djdagobert.com/cam-error.txt

That's what happens with some CAMs, but I haven't been able to find
out what exactly causes this, since it doesn't happen with my CAM here
(at least not frequently enough to do serious debugging - I do have this
like once a day or so). You may want to try the "-icam" firmware (see
DVB/driver/av7110/README-firmware).

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.