[vdr] DVB - RequestParameter error

[Sven Soltau <sven.soltau@web.de>]

Hello together,

I have got a problem (only sometimes) when I start my vdr - the DVB-card is not registering correct (Siemens DVB-S Rev. 1.3)
As you can see from the log - but why does it happen sometimes?
If it happens the DVB out doesn't show a picture - restart vdr doesn't help I have to reboot the hole system.

What can I do to get rid of this error?

Many thanks
Sven

Aug  7 15:56:04 VDR-Rechner syslogd 1.4.1: restart.
Aug  7 15:56:06 VDR-Rechner sshd[615]: Server listening on :: port 22.
Aug  7 15:56:08 VDR-Rechner /usr/sbin/cron[712]: (CRON) STARTUP (fork ok) 
Aug  7 15:56:09 VDR-Rechner kernel: klogd 1.4.1, log source = /proc/kmsg started.
Aug  7 15:56:09 VDR-Rechner kernel: Inspecting /boot/System.map
Aug  7 15:56:09 VDR-Rechner kernel: Loaded 12775 symbols from /boot/System.map.
Aug  7 15:56:09 VDR-Rechner kernel: Symbols match kernel version 2.4.18.
Aug  7 15:56:09 VDR-Rechner kernel: Loaded 725 symbols from 26 modules.
Aug  7 15:56:09 VDR-Rechner kernel: hdc: CHECK for good STATUS
Aug  7 15:56:09 VDR-Rechner kernel: Linux video capture interface: v1.00
Aug  7 15:56:09 VDR-Rechner kernel: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
Aug  7 15:56:09 VDR-Rechner kernel: PCI: Found IRQ 10 for device 00:0b.0
Aug  7 15:56:09 VDR-Rechner kernel: saa7146_core.o: adjusting pci latency to 64
Aug  7 15:56:09 VDR-Rechner kernel: DVB: registering frontend 0:0 (Alps BSRV2)...

Here is the error

Aug  7 15:56:09 VDR-Rechner kernel: RequestParameter error
Aug  7 15:56:09 VDR-Rechner kernel: DVB: AV711357876745(0) - firm 04042e00, rtsl 06f40000, vid 82c8c408, app 0000c442
Aug  7 15:56:09 VDR-Rechner kernel: DVB: AV711357876745(0) - no firmware support for CI link layer interface
Aug  7 15:56:09 VDR-Rechner kernel: outcom error
Aug  7 15:56:09 VDR-Rechner kernel: outcom error
Aug  7 15:56:09 VDR-Rechner kernel: av7110(0): adac type set to 0
Aug  7 15:56:09 VDR-Rechner kernel: outcom error
Aug  7 15:56:09 VDR-Rechner last message repeated 5 times
Aug  7 15:56:09 VDR-Rechner kernel: via-rhine.c:v1.10-LK1.1.13  Nov-17-2001  Written by Donald Becker
Aug  7 15:56:09 VDR-Rechner kernel:   http://www.scyld.com/network/via-rhine.html
Aug  7 15:56:09 VDR-Rechner kernel: PCI: Assigned IRQ 9 for device 00:12.0
Aug  7 15:56:09 VDR-Rechner kernel: eth0: VIA VT6102 Rhine-II at 0xb400, 00:0c:6e:1b:c7:64, IRQ 9.
Aug  7 15:56:09 VDR-Rechner kernel: eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
Aug  7 15:56:09 VDR-Rechner kernel: spurious 8259A interrupt: IRQ7.
Aug  7 15:56:09 VDR-Rechner kernel: isapnp: Scanning for PnP cards...
Aug  7 15:56:09 VDR-Rechner kernel: isapnp: No Plug & Play device found
Aug  7 15:56:09 VDR-Rechner kernel: IPv6 v0.8 for NET4.0
Aug  7 15:56:09 VDR-Rechner kernel: IPv6 over IPv4 tunneling driver
Aug  7 15:56:09 VDR-Rechner kernel: PCI: Found IRQ 2 for device 00:11.5
Aug  7 15:56:09 VDR-Rechner kernel: IRQ routing conflict for 00:11.5, have irq 9, want irq 2
Aug  7 15:56:09 VDR-Rechner kernel: PCI: Setting latency timer of device 00:11.5 to 64


Boot log after reboot

Aug  7 17:05:13 VDR-Rechner kernel: klogd 1.4.1, log source = /proc/kmsg started.
Aug  7 17:05:13 VDR-Rechner kernel: Inspecting /boot/System.map
Aug  7 17:05:13 VDR-Rechner kernel: Loaded 12775 symbols from /boot/System.map.
Aug  7 17:05:13 VDR-Rechner kernel: Symbols match kernel version 2.4.18.
Aug  7 17:05:13 VDR-Rechner kernel: Loaded 725 symbols from 26 modules.
Aug  7 17:05:13 VDR-Rechner kernel: VFS: Disk change detected on device ide1(22,0)
Aug  7 17:05:13 VDR-Rechner kernel: VFS: Disk change detected on device ide1(22,0)
Aug  7 17:05:13 VDR-Rechner kernel: hdc: CHECK for good STATUS
Aug  7 17:05:13 VDR-Rechner kernel: Linux video capture interface: v1.00
Aug  7 17:05:13 VDR-Rechner kernel: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
Aug  7 17:05:13 VDR-Rechner kernel: PCI: Found IRQ 10 for device 00:0b.0
Aug  7 17:05:13 VDR-Rechner kernel: saa7146_core.o: adjusting pci latency to 64
Aug  7 17:05:13 VDR-Rechner kernel: DVB: registering frontend 0:0 (Alps BSRV2)...

why does it work here and not the first time ?

Aug  7 17:05:13 VDR-Rechner kernel: DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 80002618
Aug  7 17:05:13 VDR-Rechner kernel: DVB: AV7111(0) - firmware supports CI link layer interface
Aug  7 17:05:13 VDR-Rechner kernel: av7110(0): adac type set to 0
Aug  7 17:05:13 VDR-Rechner kernel: via-rhine.c:v1.10-LK1.1.13  Nov-17-2001  Written by Donald Becker
Aug  7 17:05:13 VDR-Rechner kernel:   http://www.scyld.com/network/via-rhine.html
Aug  7 17:05:13 VDR-Rechner kernel: PCI: Assigned IRQ 9 for device 00:12.0
Aug  7 17:05:13 VDR-Rechner kernel: eth0: VIA VT6102 Rhine-II at 0xb400, 00:0c:6e:1b:c7:64, IRQ 9.
Aug  7 17:05:13 VDR-Rechner kernel: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Aug  7 17:05:13 VDR-Rechner kernel: eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
Aug  7 17:05:13 VDR-Rechner kernel: isapnp: Scanning for PnP cards...
Aug  7 17:05:13 VDR-Rechner kernel: isapnp: No Plug & Play device found
Aug  7 17:05:13 VDR-Rechner kernel: IPv6 v0.8 for NET4.0
Aug  7 17:05:13 VDR-Rechner kernel: IPv6 over IPv4 tunneling driver
Aug  7 17:05:13 VDR-Rechner kernel: PCI: Found IRQ 2 for device 00:11.5
Aug  7 17:05:13 VDR-Rechner kernel: IRQ routing conflict for 00:11.5, have irq 9, want irq 2
Aug  7 17:05:13 VDR-Rechner kernel: PCI: Setting latency timer of device 00:11.5 to 64
Aug  7 17:05:13 VDR-Rechner kernel: ALSA ../../alsa-kernel/pci/ac97/ac97_codec.c:1450: AC'97 0:0 analog subsections not