Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] vdr + kernel 2.6 another problem
First of all, I hope you all had a nice Christmas,
but now to my problem. I got VDR thanks to the help from this
list running under kernel 2.6 using a plain hauppauge DVB-S 1.3
the problem I now face is that VDR runs, I can play back older recordings
done with an older VDR version and I get the menu over xawtv,
but somehow I cannot switch to the correct channels. The sat link
is ok and passthrough into my sat receiver works after the drivers are
loaded
and I get the channels shown, but as soon as I choose one, nothing
basically happens
no sound output and xawtv does not show me any video (although I
get the VDR overlay)
I assume something might have changed in the channel format of newer VDR
versions,
I tried different channels.conf and the logs donīt really show an error:
Here are various channel list examples I have used so far to get the
thing up and running again:
Das Erste:11837:h:0:27500:101:102:0:0:28106
ZDF:11954:h:0:27500:110:120:0:0:28006
3sat:11954:h:0:27500:210:220:0:0:28007
one from another file:
ARD:11837:H:S19.2E:27500:101:102:104:0:28106:0:0:0
ZDF:11954:H:S19.2E:27500:110:120:130:0:28006:0:0:0
RTL:12188:H:S19.2E:27500:163:104:105:0:12003:0:0:0
SAT 1:12480:V:S19.2E:27500:1791:1792:34:0:46:0:0:0
I have to say that I am on DiSequ Position 0 with this one
and basically the frequencies and LNBs are correctly switched
because of the signal I get in the passthrough.
Attachment:
pgp00019.pgp
Description: PGP signature
Home |
Main Index |
Thread Index