[vdr] Re: DiSEqC and uncommitted switches (how to)

[Tony Grant <tony@tgds.net>]

Le sam 01/05/2004 à 17:13, Ora Järvinen a écrit :

> # Input 3 - Astra 2 28.2E - uncommited switch input 1
> 
> S28.2E   11700 V  9750  t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t
> S28.2E   99999 V 10600  t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T
> S28.2E   11700 H  9750  t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t
> S28.2E   99999 H 10600  t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T

Thanks for this I googled all over and didn't find this anywhere.

Now my questions:

I have a worldsat motorised dish shared by DiSEqC 1.0 analog tuner and
Skystar2 DVB card in my computer. I have a 3 way splitter after the
positionner.

I have to turn the dish manually by remote control - this isn't a
problem for me.

When I want to go from Astra 2 to Hotbird or Astra 1, I turn the dish
then scroll down the channel list to select the new channel on the
satellite I have changed to. No problem so far.

When I want to go back to the BBC on Astra 2 I can't. VDR hangs.

Can I fix this by changing to a DiSEqC 1.2 positionner and turning the
dish via VDR?

What would happen if I had 1 fixed dish pointed at Astra 2 and the other
motorised one with a splitter letting them share the single down cable
and another splitter feeding the digital and analogic tuners?

TIA for any information. This is a wee bit over my head for the moment

Tony Grant 

-- 
www.tgds.net Library management software toolkit




-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.