[vdr] Euro1080 FTA hangs vdr

[Rainer Zocholl <UseNet-Posting-Nospam-74308-@zocki.toppoint.de>]

Hallo


While zapping this (early) morning i found that every time when i 
switch to "Euro1080" i got artefacts for the fraction of a second
and then VDR dies so haviliy that a hardware  reset is
required as no OSD is dispaly anymore (but lirc commands seems
to be accepted)

"CA:" was at this time FTA!
Now it is displayed "CA: 1570"
(BTW:Where is that 1570 stored? a grep 1570 *.conf did not show anything)

Euro1080;EURO1080:12168:vC34:S19.2E:27500:308:256=eng:0:0:21100:1:1088:0




When i try now, i get:

[1767]: switching to channel 204
[1767]: Channel->Polarization() '0x76'
[1767]: LNBnr 1 LNBstate 3, requiredState 3
[1777]: changing caids of channel 204 from 0 to 622,624
[1767]: retuning due to modification of channel 204
[1767]: switching to channel 204
[1767]: Channel->Polarization() '0x76'
[1767]: LNBnr 1 LNBstate 3, requiredState 3
[1767]: info: Channel not available!(1)

That's OK.


Why was VDR dying here?
1:11 [1824]: switching to channel 204
...
1:14 [1824]: switching to channel 204
1:14 [1824]: Channel->Polarization() '0x76'
1:15 [1824]: LNBnr 1 LNBstate 3, requiredState 3
1:19 [1830]: changing transponder data of channel 98 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 300 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 310 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 311 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 312 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 313 from S19.2E:12090:v:27500:3 to S19.2E:12070:h: 27500:3
1:19 [1830]: changing transponder data of channel 314 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 315 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 316 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 317 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 569 from S19.2E:12090:v:27500:3 to S19.2E:12070:h:27500:3
1:19 [1830]: changing transponder data of channel 93 from S19.2E:12070:h:27500:3 to S19.2E:12460:h:27500:3
1:19 [1830]: changing transponder data of channel 186 from S19.2E:12070:h:27500:3 to S19.2E:12460:h:27500:3
1:19 [1830]: changing transponder data of channel 187 from S19.2E:12070:h:27500:3 to S19.2E:12460:h:27500:3
1:19 [1830]: changing transponder data of channel 188 from S19.2E:12070:h:27500:3 to S19.2E:12460:h:27500:3
1:19 [1830]: changing transponder data of channel 189 from S19.2E:12070:h:27500:3 to S19.2E:12460:h:27500:3
1:19 [1830]: changing transponder data of channel 190 from S19.2E:12070:h:27500:3 to S19.2E:12460:h:27500:3
1:19 [1830]: changing transponder data of channel 191 from S19.2E:12070:h:27500:3 to S19.2E:12460:h: 27500:3
1:19 [1830]: changing transponder data of channel 192 from S19.2E:12070:h:27500:3 to S19.2E:12460:h: 27500:3
1:19 [1830]: changing transponder data of channel 570 from S19.2E:12070:h:27500:3 to S19.2E:12460:h:27500:3
1:22 [1824]: skipped channels 205..213
1:22 [1824]: switching to channel 214
1:22 [1824]: Channel->Polarization() '0x76'
1:49 [1824]: LNBnr 1 LNBstate 3, requiredState 3
1:49 [1824]: max. latency time 27 seconds
2:49 [1824]: PANIC: watchdog timer expired - exiting!
2:49 msi logger[7785]: /root/video/VDR/runvdr restarting VDR
3:01 [7817]: VDR version 1.3.17 started

But did not really help. 

Maybe the emergency exit should modify the "last channel" 
to "channel 1" as often such hangs are channel specific so 
a reboot will not really help.



Rainer