Below is an example of my�diseqc.conf. Here Sirius is on LNB1 output, LNB2 is Amos, LNB4 is HotBird. LNB3 is commented out, there is nothing on LNB3 output. Take a look carefully on a structure and write your own diseqc.conf.

# Sirius �LNB 1

S4.8E 11700 V 9750 t v W15 [E0 10 38 F0] [E1 10 38 F0] W15 t

S4.8E 99999 V 10600 t v W15 [E0 10 38 F1] [E1 10 38 F1] W15 T

S4.8E 11700 H 9750 t V W15 [E0 10 38 F2] [E1 10 38 F2] W15 t

S4.8E 99999 H 10600 t V W15 [E0 10 38 F3] [E1 10 38 F3] W15 T

# Amos LNB 2

S4.0W 11700 V 9750 t v W15 [E0 10 38 F4] [E1 10 38 F4] W15 t

S4.0W 99999 V 10600 t v W15 [E0 10 38 F5] [E1 10 38 F5] W15 T

S4.0W 11700 H 9750 t V W15 [E0 10 38 F6] [E1 10 38 F6] W15 t

S4.0W 99999 H 10600 t V W15 [E0 10 38 F7] [E1 10 38 F7] W15 T

# Sirius LNB 3

#S5E 11700 V 9750 t v W15 [E0 10 38 F8] [E1 10 38 F8] W15 t

#S5E 99999 V 10600 t v W15 [E0 10 38 F9] [E1 10 38 F9] W15 T

#S5E 11700 H 9750 t V W15 [E0 10 38 FA] [E1 10 38 FA] W15 t

#S5E 99999 H 10600 t V W15 [E0 10 38 FB] [E1 10 38 FB] W15 T

# Hotbird LNB 4

S13.0E 11700 V 9750 t v W15 [E0 10 38 FC] [E1 10 38 FC] W15 t

S13.0E 99999 V 10600 t v W15 [E0 10 38 FD] [E1 10 38 FD] W15 T

S13.0E 11700 H 9750 t V W15 [E0 10 38 FE] [E1 10 38 FE] W15 t

S13.0E 99999 H 10600 t V W15 [E0 10 38 FF] [E1 10 38 FF] W15 T

2011/6/12 Artem Makhutov <artem@makhutov.org>

Hello,

I would like to receive one more sattelite using VDR.
I have added one more LNB to my sat dish pointing to AMOS S4.0W.

I have manually added some channels to channels.conf and vdr has pick them up and has updated channels.conf, but a lot of channels are missed there.

It looks like the NIT table is incorrect on Amos and VDR does not find all channels. What is the best way to perform a full scan on vdr, or just to add the missing transponders?

Thanks, Artem

_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr