I am new to VDR and to DVB-T and I have been trying to configure VDR 1.3.34 to work with 2 Hauppauge Nova-T DVB-T cards under Debian (kernel 2.6.13) and have run into some problems. Can someone confirm that the output of dmesg (below) looks to be ok in respect of the NOVA-T cards?

cx2388x v4l2 driver version 0.0.5 loaded
PCI: Found IRQ 5 for device 0000:02:0a.0
PCI: Sharing IRQ 5 with 0000:02:0a.2
PCI: Sharing IRQ 5 with 0000:02:0a.4
cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]: hauppauge eeprom: model=90002, tuner=76
cx88[0]: registered IR remote control
cx88[0]/0: found at 0000:02:0a.0, rev: 5, irq: 5, latency: 64, mmio: 0xf4000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
PCI: Found IRQ 11 for device 0000:02:0b.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:02:0b.2
PCI: Sharing IRQ 11 with 0000:02: 0b.4
cx88[1]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[1]: hauppauge eeprom: model=90002, tuner=76
cx88[1]: registered IR remote control
cx88[1]/0: found at 0000:02:0b.0, rev: 5, irq: 11, latency: 64, mmio: 0xf1000000
cx88[1]/0: registered device video1 [v4l2]
cx88[1]/0: registered device vbi1
cx2388x blackbird driver version 0.0.5 loaded

moon2:/tmp/w_scan# ./w_scan -o3 >> /var/lib/vdrdevel/channels.conf
Info: using DVB adapter auto detection.
Info: unable to open frontend /dev/dvb/adapter0/frontend0'
Info: unable to open frontend /dev/dvb/adapter1/frontend0'
Info: unable to open frontend /dev/dvb/adapter2/frontend0'
Info: unable to open frontend /dev/dvb/adapter3/frontend0'
main:1779: FATAL: ***** NO USEABLE DVB CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.