I have budget card (Hauppauge WinTv NOVA-S Plus) digital satellite

receiver.

Kernel 2.6.16.18

Vdr-1.3.43

I am not getting osd after running vdr.

----I get the follwing messages regarding Hauppauge card during boot:-

Jun 14 19:23:31 localhost kernel: CORE cx88[0]: subsystem: 0070:9202,

board: Hauppauge Nova-S-Plus DVB-S

[card=37,autodetected]

Jun 14 19:23:31 localhost kernel: tveeprom 1-0050: Hauppauge model

92001, rev B1B1, serial# 415502

Jun 14 19:23:32 localhost kernel: cx88[0]: hauppauge eeprom: model=92001

Jun 14 19:23:32 localhost kernel: input: cx88 IR (Hauppauge Nova-S-Plus

as /class/input/input0

Jun 14 19:23:32 localhost kernel: cx88[0]/2: cx2388x based dvb card

Jun 14 19:23:32 localhost kernel: DVB: registering new adapter

(cx88[0]).

Jun 14 19:23:32 localhost kernel: DVB: registering frontend 0 (Conexant

CX24123/CX24109)...

If I run "# vdr -Pxine" I get the fiollwing messages in

/var/log/messages but still there is no OSD (Almost same message for

mplayer)

Jun 14 19:31:47 localhost vdr: [3666] VDR version 1.3.43 started

Jun 14 19:31:47 localhost vdr: [3666] switched to user 'vdr'

Jun 14 19:31:47 localhost vdr: [3666] loading plugin:/usr/lib/vdr/libvdr-xine.so.1.3.43

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/setup.conf

Jun 14 19:31:47 localhost vdr: [3666] ERROR: unknown config parameter:

InitialChannel = 8

Jun 14 19:31:47 localhost vdr: [3666] ERROR: unknown config parameter:

InitialVolume = 1

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/sources.conf

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/diseqc.conf

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/channels.conf

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/timers.conf

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/commands.conf

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/reccmds.conf

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/svdrphosts.conf

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/remote.conf

Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/keymacros.conf

Jun 14 19:31:47 localhost vdr: [3666] found 1 video device

Jun 14 19:31:47 localhost vdr: [3666] initializing plugin: xine (0.7.6):

Software based playback using xine

Jun 14 19:31:47 localhost vdr: [3666] setting primary device to 2

Jun 14 19:31:47 localhost vdr: [3666] SVDRP listening on port 2001

Jun 14 19:31:47 localhost vdr: [3666] loading

/etc/vdr/themes/sttng-default.theme

Jun 14 19:31:47 localhost vdr: [3666] starting plugin: xine

Jun 14 19:31:47 localhost vdr: [3666] loading

/etc/vdr/themes/sttng-default.theme

Jun 14 19:31:47 localhost vdr: [3666] ERROR: remote control XineRemote

not ready!

Jun 14 19:31:57 localhost vdr: [3666] switching to channel 1

I get follwing messages also regarding dvb during boot up

Jun 14 19:23:29 localhost kernel: Linux video capture interface: v1.00

Jun 14 19:23:29 localhost kernel: saa7146: register extension 'budget

dvb'.

Jun 14 19:23:29 localhost kernel: saa7146: register extension

'budget_av'.

Jun 14 19:23:29 localhost kernel: saa7146: register extension 'budget_ci

dvb'.

Jun 14 19:23:29 localhost kernel: saa7146: register extension

'budget_patch dvb'.

Jun 14 19:23:29 localhost kernel: saa7146: register extension 'dvb'

Can any body suggest me what should I do to get VDR OSD.

--Regards

Gulab Chandra Yadava