[linux-dvb] SkyStar2 suspend

Andrei Okhremenko andreo_ at mail.ru
Thu Apr 14 12:26:18 CEST 2005


I have SkyStar2 PCI card and Fedora Core 3 linux. 

lspci output

  00:00.0 Host bridge: Silicon Integrated Systems [SiS] 650/M650 Host
(rev 80)
  00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-
PCI bridge (AGP)
  00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL
Media IO] (rev 25)
  00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus
  00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
  00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
  00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
  00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
  00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
PCI Fast Ethernet (rev 90)
  00:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII
DVB chip / Technisat SkyStar2 DVB card (rev 02)
  01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
65x/M650/740 PCI/AGP VGA Display Adapter

dvbnet -p PID started normally, but the SkyStar2 card suspend after 5
seconds. I know about "dvb_shutdown_timeout" option, but I need reloaded
module dvb_core manually. Can I set shutdown_timeout without reloaded
module dvb_core? 

Also. In /var/log/dmesg or /var/log/messages (when I loaded module
manually) there are lines:

  drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found
  drivers/media/dvb/b2c2/skystar2.c: the chip has 38 hardware filters
  DVB: registering new adapter (SkyStar2).
  i2c_readbytes: i2c read error (addr 0a, err == -121)
  DVB: registering frontend 0 (ST STV0299 DVB-S)...

Is "i2c read error" normal? Card work... but suspend.

I tried 2.6.10_770.FC3 (linuxtv-dvb-apps-1.1.0) and 2.6.11_14.FC3 (dvb-
apps cvs on Apr 12 2005) kernels from FC3 updates repository. 


More information about the linux-dvb mailing list