[linux-dvb] help new Cinergy T2 (aka newbie w/ cinergy T2)
stephen.gw at gmail.com
Wed Nov 9 20:34:31 CET 2005
On 11/9/05, Alan Miller <somebody at squareplanet.de> wrote:
> [root at athome ~]# ./tzap eurosport
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> tuning to 834000000 Hz
> video pid 0x0241, audio pid 0x0242
> status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 |
> status 1f | signal c117 | snr 7474 | ber 00000000 | unc 0000001e | FE_HAS_LOCK
> status 1f | signal 7116 | snr 7878 | ber 00000000 | unc 00000046 | FE_HAS_LOCK
> status 1f | signal 2117 | snr 7878 | ber 00000000 | unc 00000073 | FE_HAS_LOCK
> status 1f | signal e117 | snr 7676 | ber 00000000 | unc 00000099 | FE_HAS_LOCK
> status 1f | signal 1117 | snr 7878 | ber 00000000 | unc 000000c9 | FE_HAS_LOCK
> status 1f | signal 6117 | snr 7878 | ber 00000000 | unc 000000f6 | FE_HAS_LOCK
This all looks good to me. Don't be worried by the steadily increasing
'unc' (uncorrected error) value, unlike other drivers the cinergyT2
appears to report a total count of errors here rather than the the
number of errors since the previous query. This is something I plan to
have a look into and see if it's easily fixable in the driver.
Also, I suspect that either the driver or the device never reports a
'ber' (bit errors) so you will always get '0' here. Again, I plan to
have a look at the driver to see if this is possible.
More information about the linux-dvb