[linux-dvb] Pctv 300i no analog channels found (with no error
tim0m1a at gmx.de
Fri Sep 23 18:39:40 CEST 2005
Am Fri, 23 Sep 2005 17:54:42 +0200 (MEST) schrieb wolfgang pauli
<ookami at gmx.de>:
> I got this stupid card today and it does not find any channels. I am
> using "modprobe saa7134 card=26 tuner=33" and get this dmesg output
> saa7130/34: v4l2 driver version 0.2.12 loaded
> ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 19 (level, high) -> IRQ 201
> saa7134: found at 0000:01:07.0, rev: 1, irq: 201, latency: 32, mmio:
> saa7134: subsystem: 11bd:002d, board: Pinnacle PCTV Stereo (saa7134)
> [card=26,insmod option]
> saa7134: board init: gpio is c806000
> tuner: chip found at addr 0xc0 i2c-bus saa7134
> tuner: type set to 33 (MT20xx universal) by saa7134
> tuner: microtune: companycode=3cbf part=42 rev=8f
> tuner: microtune MT2050 found, OK
> tda9885/6/7: chip found @ 0x86
> saa7134: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2
> saa7134: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff
> saa7134: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff
> saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134: registered device video0 [v4l2]
> saa7134: registered device vbi0
> Seems OK to me. But it does not find any channels. It can not be the
> antenna, because it was working with the old card. I saw 100s of msgs
> about this problem, but none helped me or was solved. ANy suggestions?
> Thank you!!!
I did not realize that you want to recive analog channels as I did not
expect a question about analog video in a dvb mailing list.
If you use modprobe the card would be auto detected, so you do not need to
select a card type.
The gentoo-wiki entry explains how you can use the card with dvb-t. I
never tried to use the card with analog channels.
Erstellt mit Operas revolutionärem E-Mail-Modul: http://www.opera.com/m2/
More information about the linux-dvb