[linux-dvb] Skystar2 with different PCI-ID

Yvan Gosset ygosset at free.fr
Sat Dec 23 21:30:33 CET 2006


As I remember for my little study of the existing linux code directory about 
b2c2 driver, PC-IDs of a PCI card are not used at this time for drivers for 
FlexCop: all frontend is tried when loading modules drivers.
(you can understand this info: modules for hardware can be loaded succefully 
even hardware is not present, but it's not a problem at all for the present 

PCI-IDs is not the most important information:
you need to know the version of the Flexcop chip, the demodulator chips (and 
less?: the tuner=pll).
You can use debug parameter with insmod or modprobe 
to see more details.

For example:
"make unload
/sbin/modprobe i2c-core
/sbin/insmod ./dvb-core.ko #frontend_debug=1
/sbin/insmod ./dvb-pll.ko
/sbin/insmod ./mt312.ko
/sbin/insmod ./mt352.ko
/sbin/insmod ./bcm3510.ko
/sbin/insmod ./nxt200x.ko
/sbin/insmod ./lgdt330x.ko
/sbin/insmod ./stv0299.ko
/sbin/insmod ./compat_ioctl32.ko
/sbin/insmod ./v4l1-compat.ko
/sbin/insmod ./v4l2-common.ko
/sbin/insmod ./videodev.ko
/sbin/insmod ./video-buf.ko
/sbin/insmod ./stv0297_cs2.ko debug=1
##debug:set debugging level (1=info,2=i2c,4=calc (|-able)). (int)
/sbin/insmod ./b2c2-flexcop.ko debug=3
##debug:set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg...)
/sbin/insmod ./b2c2-flexcop-pci.ko 
##debug:set debug level (1=info,2=regs,4=TS,8=irqdma (|-able)). (int)

/sbin/insmod ./b2c2-flexcop.ko debug=3
debug info and i2c messages.. (see sources)
1=info,2=i2c,   3=1+2 

At soon, Yvan.

Le Saturday 23 December 2006 11:55, Bernhard Huafbauer a écrit :
> For the records: I have also shut down my system removed a
> AVM Fritzcard, inserted this Skystar2 and booted.
> (If this occurs only in this combination a solution could be to
> remove the old card, boot und shutdown one times and then
> insert the Skystar2?)
> Regards
> Bernhard
> Am Samstag, 23. Dezember 2006 09:51 schrieb Michael Joswig:

More information about the linux-dvb mailing list