[linux-dvb] Re: bt8xx patches issue

Ernst Herzberg list-linux-dvb at net4u.de
Sun Feb 26 07:12:14 CET 2006

On Wednesday 22 February 2006 17:54, Uwe Bugla wrote:
> Hi Sigmund, Hi Ernst,
> Please send in a printout of dmesg >dmesg.txt and comment with what kind of
> card you had success with my patch collection. Not to me but publically to
> the linuxdvb mailing list please.


I don't like the name 'patch collection'. If i apply that stuff __my__ card works. Thanks for that, good work.

> This is very important as a proof for higher decision processes, and in so
> far more worthier than just a small "Thank you".

What is a "higher decision processes"? 


Linux version 2.6.16-rc4 (root at oernie) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 PREEMPT Mon Feb 20 22:07:34 CET 2006
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 17
saa7146: found saa7146 @ mem f1024000 (revision 1, irq 17) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:23:85:9b
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input2
dvb-ttpci: found av7110-0.
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 20, latency: 64, mmio: 0xf7efe000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv0: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init]
bttv0: using tuner=-1
bttv0: registered device video1
bttv0: registered device vbi1
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "dvb0"
bt878: DVB driver version 0.0.1 loaded
bt878: DVB interface found (0).
ACPI: PCI Interrupt 0000:02:0c.1[A] -> GSI 20 (level, low) -> IRQ 20
bt878_probe: card id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions.
bt878(0): Bt878 (rev 17) at 02:0c.1, irq: 20, latency: 64, memory: 0xf7eff000
DVB: registering new adapter (bttv0).
DVB: registering frontend 1 (Conexant CX24110 DVB-S)...

oernie:~ # uptime
 07:01:18 up 5 days,  8:48,  5 users,  load average: 0.10, 0.07, 0.03

No restart of any dvb-subsytem was  necessary. Still works.
ASUS P4800-E deluxe
2*80GB ATA RAID 0/1
[and many more features:-)]

More information about the linux-dvb mailing list