[linux-dvb] DViCO FusionHDTV DVB-T Dual

Collier Family judithc at bigpond.net.au
Thu Jun 29 15:22:21 CEST 2006

I have one of these cards working with both PCI and USB . See posts a few months back mid Febuary.  My only issue now is to get the USB on the second card working. I am using 2.6.17 kernel - sorry I can't be much help over the next 2 weeks but I should be able to help when I get back if you still have the troubles.

I see a /dev/dvbX for both USB and PCI for the working device but only PCI for the second device.

  ----- Original Message ----- 
  From: Dean Macauley 
  To: linux-dvb at linuxtv.org 
  Sent: Thursday, June 29, 2006 10:41 AM
  Subject: [linux-dvb] DViCO FusionHDTV DVB-T Dual


  I have purchased this card, and I have been struggling to get things working with gentoo (kernel 2.6.16).  I am fairly new to playing with linux at this level but I have been learning much thank you to many posts etc...

  I have a question regarding this card and what I should expect in terms devices...

  Should I see two adapters under /dev/dvb/ ?  At the moment, things seem okay in dmesg (see below) however, I only have one adapter in /dev/dvb/.  The other is /dev/vbi0 ...

  I have discovered that one tuner is PCI while the other is USB...

  I am loading the following modules:

  Module                  Size  Used by 
  dvb_usb_cxusb          23684  0 
  mt352                   8196  1 dvb_usb_cxusb 
  lgdt330x                9692  1 dvb_usb_cxusb 
  cx22702                 8068  1 dvb_usb_cxusb 
  dvb_usb                18248  1 dvb_usb_cxusb 
  dvb_core               77148  1 dvb_usb 
  dvb_pll                12356  3 dvb_usb_cxusb,cx22702,dvb_usb 
  cx8800                 30412  0 
  cx88xx                 62500  1 cx8800 
  i2c_algo_bit           10184  1 cx88xx 
  video_buf              20164  2 cx8800,cx88xx 
  ir_common              10756  1 cx88xx 
  tveeprom               17040  1 cx88xx 
  compat_ioctl32          9856  1 cx8800 
  v4l1_compat            12804  1 cx8800 
  v4l2_common            10304  2 cx8800,compat_ioctl32 
  btcx_risc               6216  2 cx8800,cx88xx
  videodev               10880  2 cx8800,cx88xx

  when I try to modprobe cx88-dvb, I get an error that initialisation failed, while modprobe cx8800 seems to work...  Have I got it right?  Or should I expect two adapters in /dev/dvb?

  Thanks in advance!


  P.S.  dmesg output below

  CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [card=44,autodetected] 
  TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe 
  cx88[0]/0: found at 0000:05:06.0, rev: 5, irq: 58, latency: 32, mmio: 0xd3000000 
  cx88[0]/0: registered device video0 [v4l2] 
  cx88[0]/0: registered device vbi0 
  set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff) 
  set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00) 
  set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) 
  set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff) 
  set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] 
  set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] 
  set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed] 
  dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state. 
  dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. 
  DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB). 
  dvb-usb: recv bulk message failed: -110 
  dvb-usb: no frontend was attached by 'DViCO FusionHDTV DVB-T Dual USB' 
  input: IR-receiver inside an USB DVB receiver as /class/input/input4 
  dvb-usb: schedule remote query interval to 150 msecs.
  dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.


  linux-dvb mailing list
  linux-dvb at linuxtv.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060629/dd3b1067/attachment-0001.htm

More information about the linux-dvb mailing list