[linux-dvb] Australia and the DViCO Dual Digital 4
stuart at croppa.mine.nu
Thu Apr 26 13:51:59 CEST 2007
I am a complete newby with this however I have a divco Dual Digital 4
which i would like to make work with Ubuntu. I live in Lismore NSW and
if I can be of help please explain what you would like me to do.
Ubuntu Edgy does not even recognize the card in dmesg.
ras243-dvb at yahoo.com wrote:
> --- Michael Krufky <mkrufky at linuxtv.org> wrote:
>> I am quite sure that you are correct. In my xc-bluebird patch, the
>> zl10353 is configured with the same settings that work with the xc3028
>> inside the em2880 driver. the zl10353 driver itself *is* working for
>> other devices in Australia using tuners other than the xc3028.
>> All evidence points to the pact that we're missing the correct firmware
>> for use in AU. If you can capture that firmware, try to get the driver
>> to use it, with the code as-is after applying the xc-bluebird patch. If
>> it works, then you'll have some happy list readers. Let me know how it
>> turns out.
> I just spent the last two hours trying to get the firmware out of the usb logs
> without success. Everytime I checked the STATUS_0 register on the ZL10353 I
> ended up with nothing whereas at least with the v3 firmware I had the AGC_LOCK
> and SYM_LOCK bits set. To cut a long story short I went back to the v3
> software and got a full lock coming out of the status registers: 0=0xef 1=0x33
> 2=0x00 3=0x57. I've also been messing around with the data being sent to the
> XC3028 so I just have to figure out what I did but it's looking like we may
> have success.
> Send instant messages to your online friends http://au.messenger.yahoo.com
> linux-dvb mailing list
> linux-dvb at linuxtv.org
More information about the linux-dvb