[linux-dvb] hauppage WinTV-NOVA-T_PCI
alanh at fairlite.demon.co.uk
Sat Jan 13 21:03:44 CET 2007
I ran into the same problem.
The thing is you have a hybrid card that can do analogue and digital.
And by default things seem to load the analogue driver first. Try
unloading. So do this...
That should fix things.
It's just needed that the cx88-dvb be loaded first, to deal with the
digital part, then load the analogue.
On Sat, 2007-01-13 at 20:42 +0200, Jarno Kaunisto wrote:
> First, thanks Darren for reply and sorry about lack of information.
> card is conexant based.
> kubuntu kernel is 2.6.17-10-386
> at least that cx22702 was not automaticly loaded, if it is needed with
> conexant chip?
> lsmod|grep cx
> cx8800 35340 0
> cx8802 18436 0
> cx88xx 67620 2 cx8800,cx8802
> ir_common 34052 1 cx88xx
> i2c_algo_bit 9480 1 cx88xx
> tveeprom 15120 1 cx88xx
> compat_ioctl32 1408 1 cx8800
> videodev 27520 2 cx8800,cx88xx
> v4l2_common 24704 2 cx8800,videodev
> v4l1_compat 14340 2 cx8800,videodev
> btcx_risc 5128 3 cx8800,cx8802,cx88xx
> video_buf 26244 3 cx8800,cx8802,cx88xx
> i2c_core 22288 6
> lspci|grep CX
> 02:0a.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and
> Audio Decoder (rev 05)
> 02:0a.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
> Decoder [MPEG Port] (rev 05)
> 02:0a.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
> Decoder [IR Port] (rev 05)
> dmesg|grep cx
> [17179595.280000] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
> [17179595.280000] CORE cx88: subsystem: 0070:9002, board: Hauppauge
> Nova-T DVB-T [card=18,autodetected]
> [17179595.344000] cx2388x v4l2 driver version 0.0.6 loaded
> [17179595.444000] cx88: hauppauge eeprom: model=90003
> [17179595.444000] input: cx88 IR (Hauppauge Nova-T DVB-T as
> [17179595.444000] cx88/2: cx2388x 8802 Driver Manager
> [17179595.444000] cx88/2: found at 0000:02:0a.2, rev: 5, irq: 185,
> latency: 64, mmio: 0xf9000000
> [17179595.444000] cx88/0: found at 0000:02:0a.0, rev: 5, irq: 185,
> latency: 64, mmio: 0xfa000000
> [17179595.444000] cx88/0: registered device video0 [v4l2]
> [17179595.444000] cx88/0: registered device vbi0
> i am planning to install myth TV when i get this card working, so i checked
> installation guides and
> from messages file only the first line below was found, registering lines
> were not found.
> grep DVB /var/log/messages
> [4294707.185000] cx88: subsystem: 0070:9002, board: Hauppauge Nova-T
> DVB-T [card=18,autodetected]
> [4294708.036000] DVB: registering new adapter (cx88).
> [4294708.036000] DVB: registering frontend 0 (Hauppauge Nova-T DVB-T)...
> So I need help to pinpoint what is causing problem or how to solve this.
> >From: Darren Salt <linux at youmustbejoking.demon.co.uk>
> >To: linux-dvb at linuxtv.org
> >Subject: Re: [linux-dvb] hauppage WinTV-NOVA-T_PCI
> >Date: Sat, 13 Jan 2007 15:20:41 +0000
> >I demand that Jarno Kaunisto may or may not have written...
> > > I have that hauppage PCI card.
> > > I cannot make it work.
> > > /dev/dvb folder does not exist
> >Missing or not-loaded drivers, then...
> > > lspci -v command tells that
> > > that card is correctly identified but it also has
> > > "capabilities: <access denied>"
> >Which model is it? Newer, Conexant-based, ones need cx88-dvb (and cx22702,
> >which may be automatically loaded); older ones need budget-ci and tda1004x
> >well as a firmware file (the name of which I forget). Use modprobe to load
> > > I have Kubuntu 6.10
> >If you find that the card drivers aren't being loaded automatically during
> >boot, add them to /etc/modules.
> >| Darren Salt | linux or ds at | nr. Ashington, | Toon
> >| RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army
> >| + Output less CO2 => avoid massive flooding. TIME IS RUNNING OUT
> >You have a deep interest in all that is artistic.
> >linux-dvb mailing list
> >linux-dvb at linuxtv.org
> Express yourself instantly with MSN Messenger! Download today it's FREE!
> linux-dvb mailing list
> linux-dvb at linuxtv.org
More information about the linux-dvb