[linux-dvb] Zarlink MT352 DVB-T (Megasky)

Nick Bruton nick.bruton at bristol.ac.uk
Tue Jan 23 13:00:36 CET 2007

Hi all,

This was working with my Suse box, I've just done an upgrade to Opensuse 
10.2 and it now won't work.

It appears to see the stick as dmesg shows .....

dvb-usb: found a 'MSI Mega Sky 580 DVB-T USB2.0' in cold state, will try to 
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-megasky-02.fw'
dvb_usb_m920x: probe of 5-5:1.0 failed with error 64
usbcore: registered new driver dvb_usb_m920x
usb 5-5: USB disconnect, address 2
usb 5-5: new high speed USB device using ehci_hcd and address 3
usb 5-5: new device found, idVendor=0db0, idProduct=5580
usb 5-5: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-5: Product: DTV USB MINI
usb 5-5: Manufacturer: ULi Electronics
usb 5-5: configuration #1 chosen from 1 choice
dvb-usb: found a 'MSI Mega Sky 580 DVB-T USB2.0' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software 
DVB: registering new adapter (MSI Mega Sky 580 DVB-T USB2.0).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
DVB: Unable to find symbol qt1010_attach()
input: IR-receiver inside an USB DVB receiver as /class/input/input3
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: MSI Mega Sky 580 DVB-T USB2.0 successfully initialized and 

But when I run kaffeine it can't find any channels and gives the following 
errors ....

Tuning to: SKY THREE / autocount: 0
Using DVB device 0:0 "Zarlink MT352 DVB-T"
tuning DVB-T to 546000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
Not able to lock to the signal on the given frequency
Frontend closed
Tuning delay: 1841 ms

Can anyone help please

Thanks Nick

Nick Bruton                                          PADI Divemaster #624215
University of Bristol                                Yamaha YZF R1
Computing Service
Tyndall Avenue
Bristol BS8 1UD
Tel: 0117 9288193

Team email: isys-srct at bris.ac.uk

More information about the linux-dvb mailing list