[linux-dvb] Tuning Regression on Hauppauge Nova-T Stick for just one channel (driver dvb_usb_dib0700)

Matthias Schwarzott zzam at gentoo.org
Wed Nov 21 11:40:30 CET 2007

On Mittwoch, 22. August 2007, Matthias Schwarzott wrote:
> Hi there!
> My Hauppauge Nova-T Stick works for all but one frequency now. And this did
> also work some time ago.
> Failing channel:
> Das Erste;BR:184500000:B7Y0:T:0:513:514=deu:516:0:32:8468:12289:0
> Some working channels:
> ZDF;ZDFmobil:578000000:C23D12M16B8T8G4Y0:T:0:545:546=deu,547=2ch:551:0:514:
>8468:514:0 RTL Television,RTL;RTL
> World:834000000:M32B8Y0:T:0:337:338=deu:343:0:16405:8468:13314:0
> SAT.1;ProSiebenSat.1:626000000:M32B8Y0:T:0:385:386=deu:391:0:16408:8468:130
> ProSieben;ProSiebenSat.1:626000000:M32B8Y0:T:0:305:306=deu:311:0:16403:8468
>:13057:0 RTL2;RTL
> World:834000000:M32B8Y0:T:0:353:354=deu:359:0:16406:8468:13314:0 kabel
> eins;ProSiebenSat.1:626000000:M32B8Y0:T:0:161:162=deu:167:0:16394:8468:1305
> All other channels have frequencies above: 578 MHz and have a bandwidth of
> 8Mhz, the failing is at 184MHz + bw of 7MHz.
> I can add some logs if needed (and I am telled which).
> Here some log of mt2060 module:
> MT2060: IF1: 1220MHz
> MT2060: PLL freq=184500kHz  f_lo1=1404500kHz  f_lo2=1183850kHz
> MT2060: PLL div1=87  num1=50  div2=73  num2=8115
> MT2060: PLL [1..5]: 9c 57 23 fb 93
> MT2060: IF1: 1220MHz
> MT2060: PLL freq=578000kHz  f_lo1=1798000kHz  f_lo2=1183850kHz
> MT2060: PLL div1=112  num1=24  div2=73  num2=8115
> MT2060: PLL [1..5]: 46 70  3 fb 93
I updated to todays v4l-dvb and it still does not work :(

dmesg log of module loading:
dib0700: loaded with support for 5 different device-types
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a 
Device driver 5-6 lacks bus and class support for being resumed.
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
Device driver i2c-3 lacks bus and class support for being resumed.
dvb-usb: will pass the complete MPEG2 transport stream to the software 
DVB: registering new adapter (Hauppauge Nova-T Stick)
Device driver i2c-4 lacks bus and class support for being resumed.
DVB: registering frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)...
MT2060: successfully identified (IF1 = 1220)
input: IR-receiver inside an USB DVB receiver as /class/input/input15
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
USB driver dvb_usb_dib0700 lacks resume support.

So what can I do to get more light into this?


Matthias Schwarzott (zzam)

More information about the linux-dvb mailing list