[linux-dvb] Anysee E30C Plus (Re: DVB-C developers interested in receiving an USB adapter for hacking?)]
crope at iki.fi
Sat Oct 13 20:50:22 CEST 2007
hmm, now I am a little bit confused because there is this same id as MT352
board. Maybe this is not just board id, but some other value that differs
from design to design. Could it be firmware version...
There is matrix I have now:
board id model demod tuner module PCB version
0a 01 00 E30C Plus TDA10023 DTOS403IH102A 507DC (REV 0.2) Timo
02 02 01 E30 ZL10353 ? PCB509T REV 1.61 Heikki
06 01 00 E30 Plus ZL10353 DNOS404ZH103A ? Risto
02 02 01 E30 MT352 DNOS4D4ZH102A ? Mika (not sure
if 02 02 02 because sniff is from other dev)
CI board seems to be same design in both Plus models mentioned: 507_SM
More reports needed.
la 13.10.2007 20:17 Heikki Brotkin kirjoitti:
> My board is not Plus model but plain DVB-T version without CI.
> On PCB it says:
> REV 1.61
> and board id output is:
> 02 02 01
> So it seems to be the same as reported by models with MT352?
> Antti Palosaari wrote:
>> Terve Heikki & others
>> Thank you for reporting. That was not a big surprise because MT352 is
>> replaced by MT353 aka ZL10353. I have got logs from zl10353 Anysee E30
>> Plus device with "board id": 06 01 00. Heikki, can you check if your
>> device has same board id and whether or not it has CI (Plus model). Also
>> revision of board would be nice to know. It is printed on the PCB near
>> I will add this support to driver in next few days, after I have
>> logs I have.
>> Current driver will write error to message log if board is unknown. If
>> this occurs please report and help find out all hardware revisions /
>> Regards Antti Palosaari
>> la 13.10.2007 16:20 Heikki Brotkin kirjoitti:
>>> Antti Palosaari wrote:
>>>> Here comes the second test version. It has now remote control support.
>>>> My next plan is to fix TDA10023 issue correctly. After that I will try
>>>> to add Anysee DVB-T support also. All Anysee devices seems to be
>>>> rather similar (demod & tuner of course differs).
>>>> - put required TDA10023 options configurable
>>>> - add Anysee E30 DVB-T device support
>>>> - add Common Interface (CI) support
>>>> - fixes overall
>>>> Please test and report whether or not it works.
>>> Hi Antti + list,
>>> First of all thanks of the work you all have been doing.
>>> I just tried your version of the Anysee driver on my E30 DVB-T card. I
>>> have understood that it works for some people. According to my
>>> experiments it seems that my device does not have mt352 but zl10353
>>> module. Frontend was missing during the first tests. I did some crude
>>> hacks to the anysee.c file (practically switching mt352 to zl10353) and
>>> managed to make my card work.
>>> It's most likely not a big task to make it work on both versions but I
>>> think it's better that it's done by someone who has done changes
>>> I'm happy to give testing and other support if needed. There is some
>>> Finnish discussion going on on Finnish Ubuntu forum.
>>> I attach the hacked file in case someone wants to try it out.
>>> Best Regards,
>>> linux-dvb mailing list
>>> linux-dvb at linuxtv.org
> linux-dvb mailing list
> linux-dvb at linuxtv.org
More information about the linux-dvb