[linux-dvb] af9005-remote not working

Moisés Pérez spir73 at gmail.com
Mon Sep 17 14:18:26 CEST 2007

Hello list!!

I've written already to post my problems with my af9005 remote control.
I've tested the af9005-lirc module written by Luca and I can't make it work.

For this, I'm trying to get any input from the ir receiver inside input (its
work in hasefroch)...

dvb-usb: found a 'Afatech DVB-T USB1.1 stick' in cold state, will try to
load a firmware
[ 1100.964000] dvb-usb: downloading firmware from file 'af9005.fw'
[ 1101.484000] dvb-usb: found a 'Afatech DVB-T USB1.1 stick' in warm state.
[ 1101.484000] dvb-usb: will use the device's hardware PID filter (table
count: 32).
[ 1101.488000] DVB: registering new adapter (Afatech DVB-T USB1.1 stick)
[ 1101.492000] DVB: registering frontend 0 (AF9005 USB DVB-T)...
[ 1101.492000] input: IR-receiver inside an USB DVB receiver as
[ 1101.492000] dvb-usb: schedule remote query interval to 200 msecs.
[ 1101.492000] dvb-usb: Afatech DVB-T USB1.1 stick successfully initialized
and connected.

 As seen, the input device is recognized as /dev/input/input9

 i've tried get any string of data using it:
sudo cat /dev/input/event9   - nothing appears as string of data

and with input-events from inputlirc package:

$ sudo input-events 9
   bustype : BUS_USB
   vendor  : 0x15a4
   product : 0x9020
   version : 256
   name    : "IR-receiver inside an USB DVB re"
   phys    : "usb-0000:00:0c.0-1/ir0"
   bits ev : EV_SYN EV_KEY

waiting for events
timeout, quitting

And nothing gotten

 Any ideas??

 This method was not proved with af9005-lirc module from luca, would it

thanks in advance!!!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070917/2c1962bf/attachment.htm 

More information about the linux-dvb mailing list