[linux-dvb] HVR1200 / HVR1700 / TDA10048 support

hermann pitton hermann-pitton at arcor.de
Tue Apr 22 00:42:38 CEST 2008

Hi, Trevor and Amitay,

Am Dienstag, den 22.04.2008, 07:38 +1000 schrieb Trevor Boon:
> Hi Amitay,
> I specified the i2c_scan=1 option in my
> /etc/modprobe.d/saa7134 file and the following
> addresses were returned..
> saa7130[0]: i2c scan: found device @ 0xa0  [eeprom]
> saa7130[0]: i2c scan: found device @ 0xc0  [tuner
> (analog)]
> Regards,
> Trevor.

the 0x10 >> 1 for the digital demod is in the eeprom, if it follows
usual rules, at least the tuner is correct there.

Likely there are more possibilities, why the tda10048 does not appear,
powered off for example to safe energy, but since you also had a crash
previously, try a cold boot at first, means wait some time without any
power connected, depending on capacitors of the mobo, but 30 seconds
without any power should be always safe, and then just let it auto
detect card=0 without a tuner again and let i2c_scan=1 enabled one more

If still the same, you are likely above that basic testing step and can
scratch heads on what doing next.

Good Luck,

More information about the linux-dvb mailing list