[linux-dvb] Has anyone got the CI on a TT 3200 past the initial reset state
jo at requestfocus.be
Sun Aug 24 13:07:26 CEST 2008
On Sat, 2008-08-23 at 21:15 +0100, Roger James wrote:
> I asked a similar question this a little whiile ago and got no answer.
> So I am trying again with a bit more detail and hoping someone somewhere
> can tell me whether I am wasting my time. I need to find out whether the
> CI daughter board is broken or this combination has never worked in the
> budget-ci driver.
> The TT-3200 works fine for DVB scan and capture, but I cannot get the CI
> to initialise fully. It always times out on the initial reset and gives
> a "PC card did not respond" message in the kernel log.
> I peppered the driver with extra diagnostics and as far as I can see the
> initial CI reset process is started. The firmware version is reported as
> 0xa0 (is this correct?) so an interrupt is expected from the card. This
> interrupt never occurs. If I poll the card status
> (ciintf_poll_slot_status) when the reset times out then flags come back
> as 9 (CAMDETECT|RESET) but it looks like the read_attribute_mem does not
> give the correct value and returns 0x00 which I assume means that the
> CAM has not initialised. I have appended the dmesg output to the end of
> this message.
> If anyone has got this working can you please let me know, so I can swap
> the CI daughter board for a working one and stop wasting my time debugging.
> saa7146: register extension 'budget_ci dvb'.
> ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 12 (level,
> low) -> IRQ 12
> saa7146: found saa7146 @ mem e1a28000 (revision 1, irq 12) (0x13c2,0x1019).
> saa7146 (0): dma buffer size 192512
> DVB: registering new adapter (TT-Budget S2-3200 PCI)
> adapter has MAC addr = 00:d0:5c:68:34:04
> input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input9
> budget_ci: Slot status cf451000 set to NONE 3 fw vers a0
> budget_ci: Slot status cf451000 set to PRESENT
> budget_ci: CI interface initialised
> CAMCHANGE IRQ slot:0 change_type:1
> budget_ci: Slot status cf451000 set to RESET
> stb0899_attach: Attaching STB0899
> stb6100_attach: Attaching STB6100
> DVB: registering frontend 0 (STB0899 Multistandard)...
> budget_ci: poll status budget_ci cf451000 flags 9 slot_status 4
> budget_ci: read_attribute 0
> dvb_ca adaptor 0: PC card did not respond :( 0x1
> linux-dvb mailing list
> linux-dvb at linuxtv.org
I have the CI adaptor working on the TT S-3200.
I have ubuntu 8.04 with kernel Linux pvr 2.6.24-16-generic
I use the latest multiproto drivers.
Aug 23 14:20:52 pvr kernel: [ 37.779037] saa7146: register extension
Aug 23 14:20:52 pvr kernel: [ 37.779088] ACPI: PCI Interrupt
0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
Aug 23 14:20:52 pvr kernel: [ 37.779106] saa7146: found saa7146 @ mem
ffffc200008b2000 (revision 1, irq 19) (0x13c2,0x1019).
Aug 23 14:20:52 pvr kernel: [ 37.779111] saa7146 (0): dma buffer size
Aug 23 14:20:52 pvr kernel: [ 37.779113] DVB: registering new adapter
(TT-Budget S2-3200 PCI)
Aug 23 14:20:52 pvr kernel: [ 37.815982] adapter has MAC addr =
Aug 23 14:20:52 pvr kernel: [ 37.816245] input: Budget-CI dvb ir
receiver saa7146 (0)
Aug 23 14:20:52 pvr kernel: [ 37.864809] budget_ci: CI interface
Aug 23 14:20:52 pvr kernel: [ 38.212946] stb0899_attach: Attaching
Aug 23 14:20:52 pvr kernel: [ 38.234440] stb6100_attach: Attaching
Aug 23 14:20:52 pvr kernel: [ 38.249442] DVB: registering frontend 0
More information about the linux-dvb