[linux-dvb] Unable to lock signal on FlyDVB-T
e.grammatico at gmail.com
Fri Dec 26 17:44:58 CET 2008
Unfortunately, when I try tzap I get the following:
# tzap -a1 -c .tzap/channels.conf "TF1"
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
ERROR: error while parsing guard_interval (syntax error)
The channels.conf used has been generated by scandvb and is located at:
Thanks and regards.
2008/12/20 Eric GRAMMATICO <e.grammatico at gmail.com>:
> Thanks Hermann,
> That worked !
> 2008/12/20 hermann pitton <hermann-pitton at arcor.de>:
>> Am Samstag, den 20.12.2008, 12:30 +0100 schrieb Eric GRAMMATICO:
>>> Hello All,
>>> I am trying desperately to lock signal on a FlyDVB-T. My system is
>>> # uname -a
>>> Linux mythtv 184.108.40.206-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST
>>> 2008 i686 athlon i386 GNU/Linux
>>> It's like there is no data coming from... But my TV set is able to lock...
>>> I left all interesting information on
>>> Any help is very welcome,
>> there is a slight chance that the transmitter uses a positive offset of
>> about 167000Hz. It is quite common in France and the tda10046 can't find
>> this on its own.
>> Modify the initial scan file like this.
>> #### Cannes - Vallauris ####
>> T 490167000 8MHz AUTO NONE QAM64 8k AUTO NONE
>> T 514167000 8MHz AUTO NONE QAM64 8k AUTO NONE
>> T 578167000 8MHz AUTO NONE QAM64 8k AUTO NONE
>> T 730167000 8MHz AUTO NONE QAM64 8k AUTO NONE
>> T 690167000 8MHz AUTO NONE QAM64 8k AUTO NONE
>> T 642167000 8MHz AUTO NONE QAM64 8k AUTO NONE
>> Copy and paste and try with "scan" again.
More information about the linux-dvb