[linux-dvb] merhaba: About Avermedia DVB-S Hybrid+FM A700
bvidinli at gmail.com
Sat May 17 23:23:24 CEST 2008
thank you for your answer,
may i ask,
what is meant by "analog input", it is mentioned on logs that:" only
analog inputs supported yet.." like that..
is that mean: s-video, composit ?
(i installed mythtv on ubuntu kernel 2.6.26.rc2 , it shows in input
connections only svideo and composit... )
i want to scan air-tv channels, and dvb-s channels...
aren't these supported yet ?
i will check your suggestions... and try...
2008/5/17 Eduard Huguet <eduardhc at gmail.com>:
> You should maybe try the patches that Matthias Schwarzott made for
> non-hybrid variant of the A700 card (the one I use). They implement the add
> DVB-S support for that card, and it's running fine now for me. don't know
> if these patches might be also valid for the Hybrid version, but it's
> probably worth the try.
> You can find the patches in the Avermedia A700 wiki page of LinuxTV,
> Take the lastest full diff file from ZZam's repository and apply it
> over the current HG tree. If you are unsure about how to proceed, myou
> should first take a look at the howto page regarding LinuxTV drivers
> Good luck :D
> Eduard Huguet
>> ---------- Missatge reenviat ----------
>> From: bvidinli <bvidinli at gmail.com>
>> To: linux-dvb at linuxtv.org, "fahri donmez" <fahridon at gmail.com>,
>> ozbilen at gmail.com
>> Date: Sat, 17 May 2008 13:16:14 +0300
>> Subject: [linux-dvb] merhaba: About Avermedia DVB-S Hybrid+FM A700
>> i just compiled kernel version 2.6.26.rc2 on my ubuntu linux 8.04,
>> many things including sound not working, but i got finally name of my
>> tv/dvb card on dmesg output.
>> previously i was getting UNKNOWN/GENERIC on dmesg for my tv card,
>> i use tvtime-scanner or tvtime, it does not scan, even analog channels,
>> i use following to try new tuners, :
>> rmmod saa7134
>> modprobe saa7134 card=141 tuner=2
>> i run these two lines fo rtuner 0,1,2,3 and so on... to try different
>> tuner numbers... on some numbers, computers locks down.. i had to
>> currently i have two questions:
>> 1- what is correct statements/commands to be able to scan tv channels...
>> 2- the log says only analog inputs available now, when it will be
>> possible to watch dvb channels ?
>> 3- what is best/good tutorials/sites that describe/help in
>> dvb/tv/multimedia for ubuntu/linux, (i already looked linuxtv,
>> searched google, many sites..)
>> logs: dmesg,
>> [ 39.243703] saa7133: found at 0000:00:14.0, rev: 209, irq: 12,
>> latency: 32, mmio: 0xde003000
>> [ 39.243776] saa7133: subsystem: 1461:a7a2, board: Avermedia
>> DVB-S Hybrid+FM A700 [card=141,autodetected]
>> [ 39.243858] saa7133: board init: gpio is b400
>> [ 39.243909] saa7133: Avermedia DVB-S Hybrid+FM A700: hybrid
>> analog/dvb card
>> [ 39.243915] saa7133: Sorry, only the analog inputs are supported for
>> İ.Bahattin Vidinli
>> Elk-Elektronik Müh.
>> iletisim bilgileri (Tercih sirasina gore):
>> skype: bvidinli (sesli gorusme icin, www.skype.com)
>> msn: bvidinli at iyibirisi.com
>> yahoo: bvidinli
> linux-dvb mailing list
> linux-dvb at linuxtv.org
iletisim bilgileri (Tercih sirasina gore):
skype: bvidinli (sesli gorusme icin, www.skype.com)
msn: bvidinli at iyibirisi.com
More information about the linux-dvb