[linux-dvb] Pinnacle 330e

Olive not0read0765 at yopmail.com
Wed Sep 16 10:16:51 CEST 2009


Hello,

I own a TV card advertised as "Pinnacle Hybrid stick solo". After
installing the xc3028-v27.fw firmware; I can watch analog TV with the
em28xx module. The problem is with the digital TV. The devices /dev/dvb*
are not created. I have also tried an em28xx-new module that we find on
the net (and a patch to make it work on 2.6.30) but it does not work
either (and moreover; with this last driver, the analog part does not
work correctly with SECAM). As anyone succeeded to have the digital
part of this stick work? Here below I put the relevant part of dmesg.
After modprobing em28xx-dvb I got the supplementary line from the dmesg
output (but still no /dev/dvb* devices).

Em28xx: Initialized (Em28xx dvb Extension) extension

Olive


usb 1-1: new high speed USB device using ehci_hcd and address 8
usb 1-1: configuration #1 chosen from 1 choice
em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226,
interface 0, class 0) em28xx #0: Identified as Pinnacle Hybrid Pro (2)
(card=56) em28xx #0: chip ID is em2882/em2883
em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4
1c em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00
00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b
e0 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00
00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00
00 24 03 50 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00
6c 00 65 00 20 00 53 00 em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65
00 6d 00 73 00 00 00 16 03 em28xx #0: i2c eeprom 90: 50 00 43 00 54 00
56 00 20 00 33 00 33 00 30 00 em28xx #0: i2c eeprom a0: 65 00 00 00 1c
03 30 00 38 00 30 00 33 00 30 00 em28xx #0: i2c eeprom b0: 31 00 32 00
37 00 36 00 36 00 39 00 32 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID=
0x9567eb1a, EEPROM hash = 0x0db3a0bf em28xx #0: EEPROM info:
em28xx #0:	AC97 audio (5 sample rates)
em28xx #0:	500mA max power
em28xx #0:	Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
em28xx #0: 

em28xx #0: The support for this board weren't valid yet.
em28xx #0: Please send a report of having this working
em28xx #0: not to V4L mailing list (and/or to other addresses)

tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
tuner 1-0061: chip found @ 0xc2 (em28xx #0)
xc2028 1-0061: creating new instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type:
xc2028 firmware, ver 2.7 xc2028 1-0061: Loading firmware for type=BASE
MTS (5), id 0000000000000000. xc2028 1-0061: Loading firmware for
type=MTS (4), id 000000000000b700. xc2028 1-0061: Loading SCODE for
type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id
000000000000b700. em28xx #0: Config register raw data: 0xd0 em28xx #0:
AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
tvp5150 1-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
tvp5150 1-005c: tvp5150am1 detected.





More information about the linux-dvb mailing list