Femon-plugin
Jump to navigation
Jump to search
Description
Shows DVB signal information on the OSD.
-------------------------------------------------------------- |## Channel Name ########################## [AR][VF][A/DD][D]| |[=====Signal Strength in % ==============|=================]| |[=====Signal-to-Noise Ratio in % ========|=================]| | STR: #0000 (0%) BER: #00000000 Video: 0 Mbit/s | | SNR: #0000 (0%) UNC: #00000000 Audio: 0 kbit/s | | [LOCK] [SIGNAL] [CARRIER] [VITERBI] [SYNC] | -------------------------------------------------------------- STR - Signal strength SNR - Signal-to-noise ratio BER - Bit error rate UNC - Uncorrected blocks Video - Calculated video bitrate in Mbit/s Audio - Calculated audio / AC-3 bitrate in kbit/s LOCK - Everything's working... SIGNAL - Found something above the noise level CARRIER - Found a DVB signal VITERBI - FEC (forward error correction) is stable SYNC - Found sync bytes AR - Aspect Ratio: 1:1/4:3/16:9/2.21:1 (optional) VF - Video format: PAL/NTSC (optional) A/DD - Audio (0..5) / AC-3 track (optional) D - Device number: 0..3 (optional)
Handling
| Key | Description |
|---|---|
| ChanUp/ChanDn | Switch channel up/down |
| Up/Down | Switch channel up/down |
| 0-9 | Select channel |
| Ok | Switch between display modes: basic, transponder, stream, AC-3 |
| Green | Select next audio track |
| Back | Exit plugin |
| (Right/Left) | (Switch to next/previous device that provides the current channel) |
Femon - A real womon who lives according to her natural feminine inclinations.
Hardware requirements
- DVB card
Software requirements
Installation
Options
| Option | Description |
|---|---|
| NTSC_SYSTEM=1 | OSD defaults for NTSC system |
Problems
- The plugin supports only those DVB cards with _one_ frontend (do any cards with multiple frontends even exist?), because I haven't yet figured howto do it without patching the VDR core.
- Disable the stream analyze to speed up heavy zapping sessions.
- The signal strength and signal-to-noise ratio values are comparable only between the same brand/model frontends. Due to the lack of proper frontend specifications those values cannot be calculated into any real units.
- If the OSD isn't visible, you've configured the OSD height too big or too small. Please, try to adjust the variable on the setup page before writing any bug reports.
- There's a shrinked default OSD height for NTSC users: make NTSC_SYSTEM=1
- The device switching feature is still non-functional.
Links
| [1] | http://www.saunalahti.fi/~rahrenbe/vdr/femon | Plugin homepage |