Xine-plugin
Jump to navigation
Jump to search
Description
Hardware requirements
Here are some example configurations (Please supplement):
- PIII 550 MHz / 512 MB / Matrox G550 mit vidix, Jerky with OSD or deinterlaceing
- Athlon 800 MHz / 512 MB / ATI Radeon VE, jerky at higher resolutions
- P4 2.8 GHz HT / 512 MB / Matrox G550 mit xshm, HDTV: jerky with OSD, deinterlaceing or window size > 50%
- PII 400MhZ / 256 MB / NVIDIA Geforce 4 MX 480, nearly smooth with XvMC - sadly there is no OSD, with Xv it is not even jerky
- Athlon 1800 / 512 MB / NV Gf Ti 4200, smooth with Xv for DVB, system load < 10%
- EPIA-M 10000 / 512 MB / CLE266 with unichrome MPEG2 HW acceleration, system load 10-15%, smooth
- EPIA-M 6000 / 512 MB / CLE266 with unichrome MPEG2 HW acceleration; xine cpu usage is around 32%, ... with OSD around 36%, ... with femon around 47%; smooth
Software requirements
Installation
Options
| Option | Description |
|---|---|
| SET_VIDEO_WINDOW=1 | Full yaepg-plugin compatibility |
| DONT_CHANGE_XINE_VOLUME=1 | deactivate volume changes in xine |
| OSD_SCALING_MODE=0 | LQ = low quality for minimum CPU usage |
| OSD_SCALING_MODE=1 | HQ = higher quality for horizontal resolutions >= 360 |
| OSD_SCALING_MODE=2 | SHQ = best quality but high CPU load |
| OSD_SCALING_MODE=3 | auto SHQ = chooses SHQ for streams where width < 360 or height < 288 otherwise HQ |
Configuration
Parameter
| Parameter (short) | Parameter (long) | Description |
|---|---|---|
| -r | Remote control mode |
Problems
Links
| [1] | http://home.vr-web.de/~rnissl | Plugin homepage |
| [2] | http://xinehq.de | Xine project homepage |