The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Description
Shows DVB signal information on the OSD. Since release 1.1.0, femon does not only support local DVB cards. An Svdrp server on the network can be used as datasource as well. This is an interesting feature for those running streamdev-client on their VDR.
--------------------------------------------------------------
|## Channel Name ################### [AR][VF][A/DD][D][SVDRP]|
|[=====Signal Strength in % ==============|=================]|
|[=====Signal-to-Noise Ratio in % ========|=================]|
| STR: #0000 (0%) BER: #00000000 Video: 0 Mbit/s |
| SNR: #0000 (0%) UNC: #00000000 Audio: 0 kbit/s |
| [LOCK] [SIGNAL] [CARRIER] [VITERBI] [SYNC] |
--------------------------------------------------------------
STR - Signal strength
SNR - Signal-to-noise ratio
BER - Bit error rate
UNC - Uncorrected blocks
Video - Calculated video bitrate in Mbit/s
Audio - Calculated audio / AC-3 bitrate in kbit/s
LOCK - Everything's working...
SIGNAL - Found something above the noise level
CARRIER - Found a DVB signal
VITERBI - FEC (forward error correction) is stable
SYNC - Found sync bytes
AR - Aspect Ratio: 1:1/4:3/16:9/2.21:1 (optional)
VF - Video format: PAL/NTSC (optional)
A/DD - Audio (0..5) / AC-3 track (optional)
D - Device number: 0..5 (optional)
SVDRP - Client-server extension active (optional, femon >= 1.1.0)
Handling
Key
|
Description
|
ChanUp/ChanDn |
Switch channel up/down
|
Up/Down |
Switch channel up/down
|
0-9 |
Select channel
|
Ok |
Switch between display modes: basic, transponder, stream, AC-3
|
Green |
Select next audio track
|
Yellow |
Select audio channel: stereo, mono left, mono right
|
Back |
Exit plugin
|
Right/Left |
Switch to next/previous device that provides the current channel
|
Femon - A real womon who lives according to her natural feminine inclinations.
Hardware requirements
Software requirements
Only for using the client-server extension (SVDRP service)
Installation
See plugin installation
Options
Option
|
Description
|
FEMON_NTSC=1
|
OSD defaults for NTSC system
|
FEMON_DEBUG=1
|
Additional debugging information
|
Notes
- The plugin supports only those DVB cards with _one_ frontend, because I haven't yet figured howto do it without patching the VDR core.
- Disable the stream analyze to speed up heavy zapping sessions.
- The signal strength and signal-to-noise ratio values are comparable only between the same brand/model frontends. Due to the lack of proper frontend specifications those values cannot be calculated into any real units.
- If the OSD isn't visible, you've configured the OSD height too big or too small. Please, try to adjust the variable on the setup page before writing any bug reports. NTSC users should use a shrinked default OSD height by compiling the plugin with: make FEMON_NTSC=1
Links