https://www.linuxtv.org/wiki/api.php?action=feedcontributions&user=Michaelp&feedformat=atomLinuxTVWiki - User contributions [en]2024-03-28T18:19:50ZUser contributionsMediaWiki 1.39.6https://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS_PLUS&diff=31690Leadtek WinFast DTV2000DS PLUS2013-02-08T00:54:06Z<p>Michaelp: /* Use with Ambrosa's driver in Xubuntu 12.04 */</p>
<hr />
<div>===Overview===<br />
<br />
This is a dual tuner DVB-T PCI card. It uses an onboard VIA PCI-USB bridge so behaves like a USB device, with USB ID 0413:6f12.<br />
<br />
It has the [[RealTek RTL2832U]] chipset, unlike its sibling the [[Leadtek WinFast DTV2000DS]] which has the Afatech AF9015 and AF9013 chipset. Therefore drivers for the non-plus version will certainly not work.<br />
<br />
Note that the official Leadtek product page [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=specification] falsely states that it has the AF9015 and AF9013.<br />
<br />
The card is currently unsupported, but it is possible to get it working with the existing RTL2832U drivers - see below. It may be similar to the [[Mygica T1800B]] PCI card, since they have very similar general specifications.<br />
<br />
===Identification===<br />
<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 003 Device 002: ID 0413:6f12 Leadtek Research, Inc. <br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0 <br />
bDeviceProtocol 0 <br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6f12 <br />
bcdDevice 1.00<br />
iManufacturer 1 Realtek<br />
iProduct 2 WinFast DTV2000 DS Plus<br />
iSerial 0 <br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 25<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 4 USB2.0-Bulk&Iso<br />
bmAttributes 0xa0<br />
(Bus Powered)<br />
Remote Wakeup<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 1<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 255 Vendor Specific Subclass<br />
bInterfaceProtocol 255 Vendor Specific Protocol<br />
iInterface 5 Bulk-In, Interface<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0 <br />
bDeviceProtocol 0 <br />
bMaxPacketSize0 64<br />
bNumConfigurations 2<br />
Device Status: 0x0000<br />
(Bus Powered)</pre><br />
<br />
===Use with Ambrosa's driver in Xubuntu 12.04===<br />
<br />
I have got this card to work using this driver [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0] in Xubuntu 12.04 with the 3.2.0.37-generic kernel. I followed the instructions in the driver's README and made one minor edit. The full process is described here. <br />
<br />
1- Install compile kit, linux headers and git<br />
<pre>$ sudo apt-get install build-essential<br />
$ sudo apt-get install linux-headers-$(uname -r)<br />
$ sudo apt-get install git </pre><br />
<br />
2- clone the repository using git and go to source directory<br />
<pre>$ git clone https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0.git<br />
$ cd DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0 </pre><br />
<br />
3- edit Makefile to change the option INCLUDE_EXTRA_DVB to suit the 3.2 kernel. This means commenting out the line "INCLUDE_EXTRA_DVB := include-300" and uncommenting the line "INCLUDE_EXTRA_DVB := include-320". Obviously don't do this if you have a 3.0 kernel. (3.0 kernel is untested with this card).<br />
<br />
4- '''Now the special step!''' Edit the header file rtl2832u.h so that our device is recognised. The simplest way is to find the line <br/><br />
"#define USB_PID_LEADTEK_WARM_2 0x6F11" <br/><br />
and change the last digit to 2 so it reads<br/><br />
"#define USB_PID_LEADTEK_WARM_2 0x6F12". <br/><br />
This means we have stolen the Product ID of another Leadtek device that uses this driver. Simply adding a new line like <br/><br />
"#define USB_PID_LEADTEK_WARM_4 0x6F12" <br/><br />
is not sufficient.<br />
<br />
5- Now continue with the README instructions. Compile the code, install and insert the module.<br />
<pre>$ make clean<br />
$ make<br />
$ sudo make install<br />
$ sudo modprobe dvb_usb_rtl2832u</pre><br />
<br />
The driver module should now load automatically each time you boot. This method worked with [[Scan]] and [[VLC media player|VLC]]. (Create a channels.conf file with scan, then open the file in VLC, or run $ vlc channels.conf).<br />
<br />
The driver seems to cause problems with suspend.</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=DVB-T_PCI_cards&diff=31689DVB-T PCI cards2013-02-08T00:49:45Z<p>Michaelp: </p>
<hr />
<div>On this page you will find information regarding [[DVB-T]] [[PCI]] cards.<br />
<br />
{{non-exhaustive list}}<br />
<br><br />
==Supported DVB-T PCI Cards==<br />
The following table lists the confirmed working DVB-T PCI cards and provides a brief summary of their features and components. If you need more technical information on a device, have a look at its specific wiki article. <br />
<br />
=== [[ASUS]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Type'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[ASUS My Cinema-P7131 Hybrid|My Cinema-P7131 Dual]]<br />
<br />
[[Image:ASUS-MyCinema-P7131-Dual-box.jpg|thumb|120px]]<br />
|DVB-T + Analog [http://uk.asus.com/products.aspx?l1=18&l2=83&l3=252&l4=0&model=547&modelmenu=1]<br />
|ca. 45 €<br />
|DVB, VDR<br />
| <br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* DVB-T/FM in<br />
* Analog TV in<br />
* IR in<br />
* AV in (with cable to composite, S-video and audio)<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* With Low-Profile bracket<br />
* Supports FM-radio<br />
* Needs firmware (dvb-fe-tda10046.fw); see the [[ASUS My Cinema-P7131 Hybrid|P7131 article]]<br />
- Following the above article works under Ubuntu 7.10 (Gutsy Gibbon) using Kaffeine 0.8.5 (running the Xine Player Engine ewith the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package)<br />
|[http://www.bttv-gallery.de/HPIM2609.JPG_asus_tiger_302_a.jpg]<br />
[[Image:ASUS-MyCinema-P7131-Dual.jpg|thumb|50px]]<br />
[[Image:ASUS-MyCinema-P7131-Dual-rear.jpg|thumb|50px]]<br />
|}<br />
<br />
=== [[AVerMedia]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T (A761) | AVerTV DVB-T (A761)]]<br />
<br />
<strike>[http://www.avermedia.de/Products/TV_Tuner/DVB-T/main.htm]</strike><br />
<br />
oldest AVerTV DVB-T model<br />
|ca. 90 €<br />
|DVB, VDR<br />
<br />
[http://www.vaslet.de]<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
* S-Video in<br />
* Composite in<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* Low-Profile-Card<br />
* Difference compared to 771 is the Tuner and Composite-in<br />
|<strike>[http://www.avermedia.de/Products/images/Products/DVB-T_FB.jpg]</strike><br />
[http://www.vaslet.de/content/dvbt/averdvb_a761_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_761.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 771 (A771) | AVerTV DVB-T 771 (A771)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt771.asp?show=1]<br />
|ca. 90 €<br />
|DVB, VDR possible<br />
<br />
[http://www.gossamer-threads.com/lists/mythtv/users/72584] [http://www.frokaschwei.net/avtv771/avermedia.html], [http://www.mail-archive.com/linux-dvb@linuxtv.org/msg17579.html] [http://www.vaslet.de]<br />
<br />
Warning some people experience problems with this card search for mt352_read_register on the mailing list.<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-rerceiver included<br />
* Low-Profile-Card<br />
* Difference to the older "761" is the Tuner and the missing Composite-in<br />
|<strike>[http://www.avermedia.de/Products/TV_Tuner/dvbt771/771.jpg]</strike> [http://www.vaslet.de/content/dvbt/averdvb_a771_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_771.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16AR) | AVerTV DVB-T 777 (A16AR)]]<br />
<br />
newest model of the AVerTV DVB-T<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. 65 €<br />
|DVB, VDR ab 2.6.17-rc1<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-receiver included (v4l-dvb needs a patch to properly work)<br />
* Works on Ubuntu 6.10 "almost" out of the box.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:Avermedia777.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16A-C)| AVerTV DVB-T 777 (A16A-C)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. ? €<br />
|DVB<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Tested on 32bit Fedora 9.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:AVER777A16A-C_front.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV Hybrid+FM PCI (A16D)| AVerTV Hybrid+FM PCI (A16D)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI(A16D).asp?show=1#]<br />
|ca. 80 €<br />
| Analogue, kernel 2.6.26; <br />
DVB-T, kernel 2.6.27<br />
<br />
For DVB and experimental support, see [http://mcentral.de/wiki/index.php5/AVerMedia_AverTV_Hybrid_FM_PCI_A16D here], and maybe [http://mcentral.de/wiki/index.php5/AverMedia_Cardbus_Hybrid_TV_FM_E506R here]<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Xceive]] [[Xceive XC3018|XC3018]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|[http://www.avermedia.com/docs/productimage/AVerTV-Hybrid+FM-PCI-b.jpg]<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[AVerMedia AVerTV Hybrid+FM PCI (A16AR)| AVerTV Hybrid+FM PCI (A16AR)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI.asp?show=1]<br />
|<br />
| Yes<br />
FM radio not supported<br />
|<br />
* Philips TD1316A (tuner)<br />
* Philips TDA9887 (analog demodulator)<br />
* Philips SAA7135HL (A/V decoder)<br />
* Zarlink MT352 (DVB-T demodulator)<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|<br />
<br />
|- valign="top"<br />
|[[AVerMedia_AVerTV_DVB-T_Super_007 | AVerTV DVB-T Super 007]]<br />
<br />
[http://www.avermedia.com/EN/Default.aspx?TYPE=vipplayercard.htm&PT=product&tv_TCAT_POS=0&PID=4710710671877]<br />
|ca. 60 €<br />
| Yes (with [http://lists.zerezo.com/video4linux/msg19205.html patch])<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* DVB-T / Analog<br />
* Remote and Infra-red-receiver included<br />
* (this is "Hybrid Super 007" with Analog+DVB-T or "DVB-T Super 007" with only DVB-T?)<br />
|<br />
[[Image:Super_007_box.jpg|thumb|50px|]]<br />
[[Image:Super_007_card.jpg|thumb|50px|]]<br />
|<br />
<br />
*<br />
* DVB-T DUAL LV32TDLX<br />
|}<br />
<br />
=== [[ChainTech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[DTT 1000 PCI]]<br />
<br />
<strike>[http://www.chaintech.com.tw/tw/eng/product_spec.asp?MPSNo=15&PISNo=170]</strike><br />
|ca. 100 €<br />
|DVB, VDR<br> (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Hangs at least older kernels (<2.6.12) unless the bttv module is loaded with parameters "i2c_hw=1 card=0x71". This may cause boot problems when the module is automatically loaded by hotplug.<br />
|<strike>[http://www.chaintech.com.tw/tw/images/Products/DMPD/DTT1000_L.jpg]</strike><br />
|}<br />
<br />
=== [[Club 3D]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[ZAP-TV2202]]<br />
<br />
[http://www.club3d.nl/index.php/products/zaptv/item/11]<br />
<br />
[http://www.club3d.nl/support/manuals/zap-tv/2202/ZAPTV2202_QuickGuide.pdf Manual]<br />
|ca. 67 €<br />
|DVB, Analogue<br />
| Philips [[Philips SAA7131|SAA7131]]<br />
|<br />
* Antenna In<br><br />
* Radio In<br><br />
* S-Video In In<br><br />
|<br />
* Shows up as device 169d:3306<br />
* Installed with command modprobe saa7134 card=94<br />
|<br />
|}<br />
<br />
=== [[Compro Technology|Compro]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[Compro VideoMate T200|VideoMate DVB-T200]]<br />
[http://www.comprousa.com/New/en/product/vmt200.html]<br />
|ca. 37 €<br />
|DVB kernel 2.6.17<br />
| Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br><br />
* S-Video In<br><br />
* Composite In<br><br />
|<br />
* Remote and Infra-red-receiver included <br />
(to get the irda working correctly you may find this mail useful [http://marc.theaimsgroup.com/?l=linux-video&m=113672404400380&w=2] )<br />
* HDTV *(1080i / 720P) ready<br />
* Power on via irda<br />
* warning: problems with poor reception: [http://cvs.mythtv.org/trac/ticket/2664]<br />
|<br />
|}<br />
<br />
=== [[DViCO]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[FusionHDTV Dual Digital 4]]<br />
<br />
[http://www.fusionhdtv.co.kr/ENG/products/DVBTdual4.aspx]<br />
|<br />
* DVB, VDR<br />
* <strike>works with [http://fremnet.net/article/228/dvico-fusionhdtv-dual-digital-4-under-linux patches] - (non Australian users should ignore the dd4.au.patch patch and not use the xc3028.au2.fw firmware).</strike> See https://help.ubuntu.com/community/DViCO_Dual_Digital_4<br />
Revision 2 of this card has just been released ([http://mandmservices.com.au/dvico image]). The new card uses a DIBCOM tuner and modulator <strike>and does not work under the current driver.</strike><br />
<br><br />
The linuxTV drivers are now updated, the revision two works beautifully. The changes do not yet seem to be merged with the Linux kernel (2.6.27), the link above should help you install the drivers. The Rev 2 card may not work properly with older kernels such as 2.6.22 (AMD 780G chipsets, USB disconnects), even using the latest linuxTV drivers. The following link also has some useful information: http://ubuntuforums.org/showthread.php?t=616103 <br />
|Rev 1- Zarlink ZL10353<br />
Rev 2- Dibcom 7070pb1 tuner, CY7C68013A USB peripheral controller, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna in<br />
* IR In<br />
|<br />
* Dual DVB-T tuner card<br />
* Supports HD streams<br />
* <strike>Requires patching</strike><br />
* Is actually two USB devices attached though a Via PCI-to-USB bridge<br />
* Uses <tt>dvb-usb-cxusb</tt> module<br />
* Rev 2 uses <tt>dib0070, dib7000p, dib7000m, dib3000mc, dibx000_common</tt> modules<br />
* Includes low-profile PCI bracket<br />
|<br />
[[Image:DViCO_FusionHDTV_Dual_Digital_4.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|<br />
FusionHDTV Dual Digital 2<br />
|<br />
* DVB-T<br />
| <br />
* CX23880<br />
|<br />
* Antenna In<br />
* IR In<br />
* S-Video In<br />
* USB Type-B connector<br />
|<br />
* Dual PCI/USB device - has a loopback cable<br />
* Works out of the box in Ubuntu 10.04 (and earlier versions)<br />
* Low-Profile<br />
|<br />
(No Picture)<br />
|}<br />
<br />
* [[DViCO FusionHDTV DVB-T1]]<br />
* [[DViCO FusionHDTV DVB-T Lite]]<br />
<br><br />
<br />
=== [[GDI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[GDI Black Gold]]<br />
<br />
[http://www.blackgold.tv/products/digital.htm]<br />
|<br />
|S-Video support works (Small patch which is now in CVS). DVB doesn't work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]]/Front End CX22702/Tuner Philips TU1216/[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]] demodulator<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
|Like this, but slightly longer with a heat sink. <br><br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_Plan.jpg Card]<br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_End.jpg Connectors]<br />
|}<br />
<br />
=== [[Geniatech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech X8000-MT|X8000-MT]]<br />
<br />
[http://www.geniatech.com/pa/x8000t.asp]<br />
| 45 €<br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23883]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 <br><br />
Identical board to [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[[Image:X8000T-DVBT-PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Hama]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[DVB-T PCI-Karte]]<br />
<br />
<strike>[http://www.hama.de/portal/articleId*110877/action*2563/searchMode*1/bySearch*dvb-t]</strike><br />
|ca. 80 €<br />
|DVB, VDR possible<br><br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|[[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[TwinHan]] [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]]<br />
|[http://www.hama.de/bilder/00049/abb/00049019abb.jpg]<br />
|}<br />
<br />
=== [[Hauppauge]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|Old [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(until 06/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* '''Since 07/2004 Hauppauge have been shipping a new Nova-T (see below)'''<br />
* Comes with remote<br />
[[Image:Hauppauge_nova-t_remote.jpg|thumb|30px|]]<br />
|[[Image:Hauppauge_nova-t_old.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|New [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(since 07/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|ca. 100 €<br />
|Works with patches from [http://dl.bytesex.org/patches/] or >= kernel 2.6.12<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* Remote In<br />
|<br />
* Drivers included in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* Comes with same remote as the older model<br />
|[http://sulu.sohanet.de/tmp/]<br />
[[Image:Hauppauge_nova-t_juli2004.jpg|thumb|50px|]]<br />
[[Image:Hauppauge_nova-t_juli2004_Packung.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge WinTV-NOVA-T-500|WinTV-NOVA-T-500]]<br />
<br />
(since 09/2006) [http://www.hauppauge.co.uk/pages/products/data_novat500.html]<br />
|ca. 100 €<br />
|works with v4l-dvb hg from 2006-09-20 [http://www.linuxtv.org/repo/] or kernel >= 2.6.19 - <br />
|[[DiBcom]] [[DiBcom DiB7xxx|DiB0700]]<br />
|<br />
* Antenna In<br />
* Remote In (should now be working)<br />
|<br />
*Dual DVB-T tuner card.<br />
*As of 28/08/2008, according to Michael Krufky, all currently released versions, including the Diversity model, are supported by head of v4l-dvb hg, and the driver is likely to stay ahead of new card releases in the future.<br />
*PCI 2.2 card using 3.3V. Failed to run on PCI 2.1 system.<br />
|<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1300|WinTV-HVR-1300]] (since 07/2005)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1300.html]<br />
(HVR-1100 is similiar to HVR-1300, but without MPEG hardware encoder)<br />
|ca. 130 €<br />
|Digital & Analogue working in repository [http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=3e90edbf7c53584f109fe091d7380e8bda9fa282;style=gitweb]. Encoder support being worked on.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* DVB support in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* This card has tuning problems in MythTV and Kaffeine (works with tzap). See the card page.<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|[http://sulu.sohanet.de/tmp/][[Image:100 7999.JPG|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1110|WinTV-HVR-1110]] (since 09/2006)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1110 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10046 chipset)<br />
|ca. 70 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported with the latest 2.6.18 kernel, need latest v4l-dvb (mercurial) to work on older kernels. See [http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_Mercurial].<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1120|WinTV-HVR-1120]] (since 05/2009)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1120 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10048 chipset)<br />
|ca. 50 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported since kernel 2.6.31. <br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-3000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr3000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hvr3000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hvr3000.jpg|thumb|50px|]]<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-4000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr4000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, DVB-S2 and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|50px|]]<br />
<br />
|}<br />
=== [[Jactek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech JH-600|JH-600]]<br />
<br />
[http://www.jactek.com.tw/product_pctv/product_jh600.html]<br />
| <br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-2388x]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Identical board to [[Geniatech X8000-MT|X8000-MT]], [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[http://www.jactek.com.tw/product_pctv/images/product_jh600_34.jpg]<br />
|}<br />
<br />
=== [[KNC1]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[KNC1 TV-Station DVB-T | TV-Station DVB-T]] <br />
<br />
[http://www.kncone.de/d/produkte/digital_dvb_t.htm]<br />
<br />
|ca. 80 €<br />
|DVB, ? <br />
|Philips [[Philips SAA7146|SAA7146]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* [[Common Interface]]<br />
| <br />
|<br />
|}<br />
<br />
=== [[KWorld]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[KWorld_V-Stream_Xpert_DVB-T_PCI|V-Stream Xpert DVB-T PCI]] <br />
<br />
[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.html]<br />
|ca. 80 €<br />
|DVB, VDR possible [http:///www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00716.html] New card:[http://www.manenti.org/blog/archives/000089.html]<br />
Full support :[[http://linuxtv.org/wiki/index.php/KWorld_V-Stream_Xpert_DVB-T_%28tuner_THOMSON_DTT_7579%29]]<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite In<br />
* Remote In<br />
|<br />
* Remote & IR-receiver included<br />
* There are three versions of this card, one with a Samsung tuner similar to the AVerMedia 771, another with a Thomson tuner (similar to the Nova-T 90002) and another with Thomson tuner DTT 7579. All versions are supported. <br />
|[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.jpg]<br />
|- valign="top"<br />
|[[KWorld DVB-T 220 | DVB-T 220]]<br />
<br />
[http://www.kworld.com.tw/en/kworld/body/Products/D+A/DVB-T220.htm]<br />
|<br />
|DVB, analogue<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In (two)<br />
* FM In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe saa7134-dvb' to enable DVB.<br />
| <br />
[[Image:kworld_DVB-T220.jpg|thumb|120px]]<br />
<br />
|- valign="top"<br />
|[[KWorld_DVBT-100 | DVBT-100]]<br />
<br />
[http://www.kworld.com.tw/en/index_digital.htm]<br />
|<br />
|DVB, analogue<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite video In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe cx88-dvb' to enable DVB. Suspected same card as KWorld_V-Stream_Xpert_DVB-T_PCI. <br />
|<br />
<br />
|- valign="top"<br />
|[[KWorld DVB-T PC160-2T | DVB-T PC160-2T ]]<br />
<br />
[http://www.kworld.com.tw/product_overview.aspx?P_ID=215]<br />
|<br />
| '''NOTE: This card is IDENTICAL to Leadtek DTV2000DS, except for the USB ID, the remote, and the sticky label on the tuners!'''<br />
So please refer to DTV2000DS for extra info.<br />
Dual DVB-T tuners, also known as PEAK DVB-T Dual tuner PCI (221544AGPK)<br />
Working as single tuner card (at least) on 2008-06-05<br />
http://linuxtv.org/hg/~anttip/af9015-mxl500x-copy-fw/<br />
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files<br />
Ref http://marc.info/?l=linux-dvb&m=121268349100641&w=2<br />
A single tuner variant (PC-160-T) is now also supported.<br />
|[[Afatech AF9015|AF9015]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Note that curent kernel versions do not have a keymap for the provided remote, see here for some info about setting up a custom keymap: http://francisfisher.me.uk/problem/2012/kworld-pc160-2t-remote-control-on-ubuntu-linux-11-10-2/<br />
* From my experience, the latest driver (23/03/12) has some bugs that require daily hard resets of the device.<br />
* KWorld support are not interested in providing any assistance getting the device working: "Sorry,we can't help you to solve the remote problem in Linux,since we don't highlight/mention that it can support this system. If you have the problem in Windows system,we are willing to help you solve it."<br />
| <br />
[[Image:Kworld pc160.jpg|thumb|120px]]<br />
<br />
<br />
|}<br />
<br />
=== [[Leadtek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 S|WinFast DTV1000 S]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=382&check=f]<br />
|<br />
| DVB<br />
| [[Chipset NXP 18271 + 10048 + 7130]]<br />
|<br />
* TV Antenna In<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Drivers will be included in 2.6.33 Kernel. Meanwhile can be downloaded http://kernellabs.com/hg/~mkrufky/dtv1000s<br />
* The tuner works with Mythbuntu 9.10 as does remote.<br />
| <br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 T|WinFast DTV1000 T]]<br />
[http://www.leadtek.com.tw/eng/tv_tuner/overview.asp?lineid=6&pronameid=220]<br />
|<br />
| DVB<br />
| [[Conexant Systems, Inc.|Conexant]] based system see [[LR6650]]<br />
|<br />
* TV Antenna In<br />
* TV antenna out (loop through)<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Since kernel 2.6.15-rc1<br />
* The tuner works with Mythbuntu 7.10 (i386) but the remote doesn't.<br />
* In Australia, this card appears to have been superseded by the DTV 1000 S which uses a different chipset and apparently is not supported.<br />
| [http://www.leadtek.com.tw/eng/tv_tuner/image/winfast_dvt1000t_2.jpg]<br />
<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H]]<br />
| $AUD 80<br />
| DVB<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 6-pin for video in<br />
|<br />
* DVB-T works with Ubuntu 7.10 (i386), Kaffeine 0.8.5 and the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package<br />
* FM tuner is not found, no radio function<br />
|<br />
<br />
|-<br />
| [[Leadtek WinFast DTV1800 H|WinFast DTV1800 H]]<br />
| $AUD 75<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 (on latest cards on sale in Aus), earlier cards had Xceive xc3028<br />
* Demod:ZL10353<br />
* Demux:CX23883<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
* Comes with remote control<br />
|<br />
* Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html]. Tested with Kaffeine and Australian DVB-T Broadcasts.<br />
* IRC works but default key mapping is incorrect with KDE4 - needs work.<br />
|[http://dev.gentoo.org/~dragonheart/winfast/_MG_1893.JPG]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000DS|WinFast DTV2000DS]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530]<br />
| $AUD 65<br />
| DVB-T<br />
|<br />
* '''Tuner''': '''NXP TDA18211, but detected as TDA18271 by V4L drivers'''<br />
* '''Chipset''': AF9015 + AF9013<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x ph jack for IR sensor<br />
|<br />
* Dual DVB-T tuner card<br />
*'''Read the page regarding the working status of this card.'''<br />
* Supports HD streams<br />
* Is actually two USB devices attached though a VIA VT6210L PCI-to-USB bridge<br />
* Uses dvb_usb_af9015 and af9013 modules<br />
* Includes low-profile PCI bracket<br />
* Includes remote and Infra-Red sensor<br />
* '''Warning''': The DTV2000DS PLUS is completely different. <br />
| [[Image:Leadtek dtv 2000ds 2s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|50px]]<br />
|<br />
|-<br />
<br />
|[[Leadtek WinFast DTV2000DS PLUS|Winfast DTV2000DS PLUS]]''' [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=overview]<br><br />
|~$65 AUD<br />
|DVB<br />
|<br />
* Chipset: [[RealTek RTL2832U]]<br />
* Tuner??<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Dual DVB-T tuner card with DAB+ radio.<br />
* Uses VIA onboard PCI-USB bridge and appears as a USB device (ID 0413:6f12)<br />
* Comes with remote control, IR sensor and low profile bracket.<br />
* '''Partially supported'''. Can be made to work at least with Xubuntu 12.04 kernel 3.2 - see card page for details.<br />
* Remote and DAB+ are untested.<br />
* '''Warning''': The non-PLUS version is completely different.<br />
|<br />
|-<br />
<br />
<br />
<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H rev J]]<br />
| $AUD 75<br />
| DVB Analog Hybrid<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX23881|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* 1 x 4 pin audio output connector (internal CD audio type)<br />
|<br />
* Random success with analog OR DVB-T video no sound<br />
* See: [http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H]:<br />
* Add "cx88-dvb" to /etc/modules<br />
* Add "options cx88xx card=51" to /etc/modprobe.d/options<br />
* Add "options cx88xx card=51,51" to /etc/modprobe.d/options if using two cards<br />
* Try adding "options cx88-alsa index=1,2" to /etc/modprobe.d/options and use /dev/dsp in MythTV Frontend if having sound issues in MythTV<br />
* DTV + audio worked out of box in Mythbuntu 8.10 and Ubuntu 8.10. <br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H Plus|WinFast DTV2000 H Plus]]<br />
| $AUD 100<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 on older cards (eg 107d:6f42), Xceive XC3028 on newer cards (eg 107d:6f44)<br />
* Demod:ZL10353<br />
* Demux:CX2388x<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* Comes with remote control<br />
|<br />
* 107d:6f42: Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html].<br />
* 107d:6f44: DVB-T works with "options cx88xx card=81" (using the vanilla v4l) in /etc/modprobe.d/video4linux but none of the other inputs work. Analog works with "options cx88xx card=51" but DVB-T doesn't, even when tuner=71 is specified.<br />
|<br />
<br />
|}<br />
<br />
=== [[LifeView]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T|FlyDVB-T]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt.htm]<br />
|<br />
|DVB-T only<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Composite in<br />
* Remote In<br />
|<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR301.jpg|thumb|85px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Duo|FlyDVB-T Duo]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_duo.htm]<br />
|<br />
|DVB-T and Analog<br />
|Philips [[SAA7133]]<br />
|<br />
* Cable/Antenna In (two)<br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR306.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|[[LifeView FlyDVB Trio| FlyDVB Trio]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvb_trio.htm]<br />
|<br />
|DVB-T, Satellite and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Satellite Antenna In<br />
* Digital Antenna In<br />
* Analog Antenna In<br />
* S-Video/Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:photo_dvb_trio.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Hybrid|FlyDVB-T Hybrid]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_hybrid.htm]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
|<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[LifeView FlyDVB-T Hybrid MCE PRO|FlyDVB-T Hybrid MCE PRO]]<br />
|<br />
|DVB-T and Analog HW encoder<br />
|<br />
* Philips [[SAA7131]] <br />
* Vixs encoder<br />
|<br />
* Cable/Antenna In <br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Hybrid analog/digital HW encoder card<br />
* Supported by Linux kernel 2.6.15<br />
|[[Image:323.jpg|thumb|120px|]]<br />
|}<br />
<br />
=== [[Lorenzen]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[SL DVB-T PCI]] <br />
<br />
<strike>[http://www.lorenzen.de/produkte/cgi-bin/iboshop.cgi?showd60!,3709831960,3930]</strike><br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
* Can support +5V power supply for Antenna (Jumper on board)<br />
| <strike>(Old Design): [http://www.lorenzen.de/produkte/bilder/3922%20200.jpg]</strike><br />
[[Image:Lorenzen_SL_DVB-T_PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Medion]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Medion CTX953 | CTX953]] <br />
<br />
(a.k.a Creatix CTX 953: [http://www.creatix.de/produkte/multimedia/ctx953.htm])<br />
|<br />
| DVB-T tested and works with 2.6.29, analog is untested by me. I suspect it works, too.<br />
|<br />
* NXP SAA 7131E/03/G<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
* NXP 8275AC1<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Audio-In (3.5mm)<br />
* Composite-In<br />
|<br />
* ml-thread: [http://article.gmane.org/gmane.comp.video.video4linux/34255]<br />
|<br />
[[Image:Medion_CTX953_front.jpg|thumb|150px|]]<br />
[[Image:Medion_CTX953_back.jpg|thumb|150px|]]<br />
<br />
|- valign="top"<br />
|<br />
Philips TV/Radio Card CTX918, (Medion 7134), PCI<br />
<br />
|~6€, Ebay Germany<br />
|DVB-T working, FM apparently too ([http://linuxtv.org/v4lwiki/index.php/Generic_SAA7134_Card_Installation Instructions])<br />
|<br />
<br />
* FMD1216ME<br />
* Philips SAA7134HL<br />
* SV92PL<br />
* CSP1034S<br />
<br />
|<br />
* Antenna In<br />
* FM In<br />
|<br />
[http://www.creatix.de/support/download/gruppe6/CTX918_spec.pdf Spec]<br />
[http://www.creatix.de/support/typ.php?tid=62&gid=6 Link to OEM]<br />
|<br />
[[Image:7134.jpg|thumb|150px|]]<br />
|}<br />
<br />
=== [[MSI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D|TV@nywhere A/D]]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
* clone of LifeView FlyDVB-T Hybrid<br />
* requires "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1]] <br />
|Around $65 AUD<br />
|'''Unsupported'''<br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* As of kernel 2.6.23.13 the frontend seems to not work, even with "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1 alternate]] <br />
|Around $65 AUD<br />
|Analog and DVB-T (partially)<br />
|<br />
*Philips [[SAA7131E]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
*Tuner 8275AC1<br />
|<br />
* FM Antenna in<br />
* TV Antenna in<br />
* AV input (comes with adaptor that allows connection of s-video or composite video as well as RCA connectors for audio) <br />
* IR-Remote<br />
|<br />
* This card mostly works with the latest drivers as of 2008-02-08 (tested using mythbuntu 2.6.22-14-generic kernel). There is a problem with unreliable firmware loading. The card only works if the firmware loads correctly.<br />
* Requires card=109<br />
|<br />
[[Image:MSI TV@nywhere A-D v1.1.JPG|thumb|120px]]<br />
|}<br />
<br />
<br />
=== [[Mygica]] ===<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Mygica T1800B|T1800B]]<br />
| 70 AUD<br />
|Dual DVB-T, DAB+ (untested), Remote Control (untested), <br />
|RTL2832U<br />
|<br />
* Antenna In<br />
* AV In<br />
|Requires out-of-tree drivers (see documentation)<br />
|[http://www.auspcmarket.com.au/info/EL-MY-T1800B/]<br />
|- valign="top"<br />
|[[Mygica T188|T188]]<br />
| 30 AUD<br />
|Single DVB-T, DAB+ (untested), Remote Control (untested)<br />
|RTL2832U, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* Uses same (out-of-tree) drivers as the T1800B.<br />
* Driver appears to have bug which prevents getting a signal lock if more than one of these cards are present.<br />
|[http://i49.tinypic.com/68rfon.jpg]<br />
|}<br />
<br />
=== [[Nebula]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Nebula DigiTV PCI|DigiTV PCI]]<br />
<br />
[http://www.nebula-electronics.com/information/info.asp?Code=0001]<br />
|ca. 150 €<br />
|DVB,VDR<br> NXT6000 demod supported by recent kernels, mt352 demod will be supported by kernels >= 2.6.14-rc1.<br />
|<b>Demod Chip</b><br><br />
<i>Old board:</i><br> <br />
[[ATI NXT6000]]<br><br />
<i>New board:</i><br><br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br><br />
<b>Tuner (tin box)</b><br><br />
[[Alps TDED4]] <i>(both boards)</i><br><br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* AV In<br />
* Remote In<br />
|<br />
* Comes with remote<br />
|[http://www.nebula-electronics.com/images/ProdPCI.jpg]<br />
|}<br />
<br />
=== [[NotOnlyTV]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[NotOnlyTV LV3H|LV3H]]<br />
<br />
[http://www.notonlytv.net/p_lv3h.html]<br />
| 39 €<br />
|<br />
*DVB-T <br />
*Analog (brightness problems)<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23881]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 (Geniatech X8000-MT DVBT)<br><br />
Some options are needed to work properly: <br />
<code>options cx88xx card=81 tuner=71</code><br />
|[http://www.notonlytv.net/img/products/lv3h_01.jpg]<br />
|}<br />
<br />
=== [[NPG]] ===<br />
<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Real DVB-T]] <br>[http://www.npgtech.com]<br />
|<br />
|Doesn't seem to work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23880-19]] CX22702-25<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
* 2.6.16 kernel recognizes the card as "Conexant DVB-T reference design" (card=19)<br />
|<br />
|}<br />
<br />
=== [[Pinnacle]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[PCTV MediaCenter 300i]]<br />
<br />
[http://www.pinnaclesys.com/ProductPage_n.asp?Product_ID=2451&Langue_ID=4]<br />
|ca. 110 €<br />
<br />
(~40 € for "Dazzle" package with no remote)<br />
|DVB works with patches from [http://dl.bytesex.org/patches/], but see this thread [http://www.linuxtv.org/pipermail/linux-dvb/2005-December/007035.html] for recent regression post 2.6.12<br />
Everyone seems happy using Hartmut's Patch [http://www.linuxtv.org/pipermail/linux-dvb/2006-February/008345.html] with more recent kernels. Check the associated thread for more info...<br />
<br />
July 2006: Worked out of the box with recent kernel 2.6.17 Debian unstable!<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br />
[[tda9887]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/ProductImages/Ss_01_MediaCenter300iB_02.jpg]<br />
<br />
[http://www.pinnaclesys.com/images/box/box_128x148_pctvmediacenter300i_bl_4.jpg]<br />
|- valign="top"<br />
|[[PCTV MediaCenter 310i]]<br />
<br />
[http://www.pinnaclesys.com/PublicSite/sp/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+310i.htm]<br />
|ca. 110 €<br />
|DVB works with Debian AMD64 testing<br />
<br />
Worked out of the box with recent kernel 2.6.20<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
[[tda8275A]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
* Quality better than Pinnacle software for win xp.<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[PCTV Dual DVB-T Pro PCI / 2000i]] <br />
<br />
[http://www.pinnaclesys.com/PublicSite/de/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+%28DVB-S_DVB-T%29/PCTV+Dual+DVB-T+Pro+PCI.htm]<br />
|ca. 120 €<br />
|Not working so far (Oct.2006). Shows up as three unknown PCI devices ID 0040, 0041, 0042 with subsystems 0044. Manufacturer ''Pinnacle Systems Inc.'' detected correctly.<br />
|2x [[Zarlink ZL10353]]<br> 2x [[Microtune MT2060]]<br />
[[PINNACLE DTV BRIDGE 0612MP007/0611MP007]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Dual DVB-T tuner card.<br />
* Comes with remote control. Uses Pinnacle's own application, might not be avalable for Linux.<br />
* [http://reactorcore.net/v4l/pctv-2000i High Quality Pictures]<br />
|[http://www.sandbox.de/dvb-t/Pinnacle_Dual_DVB-T_Pro_PCI.jpg]<br />
|}<br />
<br />
=== [[Satelco]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Satelco Easywatch PCI DVB-T]]<br />
<br />
[http://www.satelco.de/htm/shop/popup/intro_dvb_t.htm]<br />
|<br />
ca. 60 €<br />
|<br />
*Not supported yet by present kernel release (2.6.25).<br />
*A [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=251130bf266000fe6e9fdccda50fe4b5c1d6cb24 patch] is on the way. Latest [http://linuxtv.org/hg/v4l-dvb v4l-dvb drivers] should be [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers#Case_2:_Installation_of_LinuxTV_Drivers_Required manually compiled] (this requires kernel 2.6.19 or higher).<br />
*This card is not suitable for [http://knoppmyth.net/knoppmyth.html KnoppMyth R5F27], as the aforementioned workaround may be tricky to apply to the distro's kernel (2.6.18-chw-13).<br />
|<br />
* '''PCI bridge''': [[Philips SAA7146]]<br />
* '''Tuner''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In (top)<br />
* Antenna Out (bottom)<br />
|<br />
Onboard connector to Common Interface extension kit (not included).<br />
|<br />
[http://www.satelco.de/img/produkte/easywatch/easywatch_dvb_t_2.jpg]<br />
[http://www.satelco.de/img/produkte/easywatch/dvbt/thumb/tn_2vorne.jpg]<br />
|}<br />
<br />
=== [[TechniSat]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TechniSat AirStar 2 PCI / Air2PC DVB PCI|AirStar 2 PCI / Air2PC DVB PCI]] [http://www.technisat.de/?site=produkte/produkteview.php&kid=1,29&pid=1352&PHPSESSID=69a82464181e34e44928a4fe4ff4fe6c&reload]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.vdr-portal.de/board/thread.php?sid=&postid=154853][http://www.vdr-portal.de/board/thread.php?postid=163580#post163580]<br />
| <br />
* [[Zarlink]] [[Zarlink MT352|MT352]] <br />
* (autodetect in linux kernel driver also includes: cx24123, cx24113, s5h1420 modules)<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
|<br />
* Remote and LIRC Compatible Serial Dongle Included.<br />
<br />
|[[Image:AirStar_DVB-T_PCI.jpg|thumb|120px]]<br />
|}<br />
<br />
=== [[TechnoTrend]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|-<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1200|TT-DVB-T 1200]]<br />
|ca. 210 €<br />
|DVB, VDR<br><br />
|?<br />
|<br />
* Antenna In<br />
* Video Out<br />
|<br />
* The TT-DVB-T 1200 is the only known "[[Full-featured Card|full-featured]]" DVB-T Card.<br />
* Can only tune UHF channels: '''VHF is not supported with this card!'''<br />
|.<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1500|TT-DVB-T 1500]]<br />
<br />
[http://www.technotrend.com/2783/TT-budget__T-1500.html]<br />
|ca. 79 €<br />
|DVB, VDR<br><br />
|Bridge:[[Philips SAA7146]]<br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046]]<br><br />
|<br />
* Antenna In<br />
* [[Common Interface]] (on board connector). Needs to be bought separately.<br />
|<br />
* Gives wrong frequencies when channelscanning in for example xawtv4 and mythtv for at least one user. As long as the channel frequencies are adjusted afterwards everything works fine. (Hardware: 0000:00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01))<br />
* To make the fine piece of remotecontrol that comes with the budget t 1500 card, add these lines to:<br />
* /etc/modprobe.d/options<br />
* options budget_ci rc5_device=255<br />
* And use it with the [http://linuxtv.org/vdrwiki/index.php/Remote-plugin VDR Remote-plugin]<br />
<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1300|TT-DVB-T 1300]]<br />
<br />
[http://www.technotrend.de/english/products/pcproducts3-1.html] [http://www.technotrend.de/english/products/pcproducts3-2.html]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[TechnoTrend TT-PCline Budget3 TA1000|TT-PCline Budget3 TA1000]]<br />
|ca. 90 €<br />
|?<br />
|?<br />
|<br />
* Antenna In<br />
|<br />
* Combination DVB-T and analog (PAL/NTSC)<br />
|[http://www.dvbshop.net/images/budget3.jpg]<br />
|}<br />
<br />
=== [[TerraTec]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1200_DVB-T|Cinergy 1200 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=224]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Bridge: [[Philips SAA7146]]<br><br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* Video In<br />
| <br />
|<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1400_DVB-T|Cinergy 1400 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=244]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Tuner: Thomson [[TT 7579]]<br><br />
Chipset Connexant CX88XX<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
* Remote In <br />
|<br />
* Use cx88xx with option card=30 (if kernel>=2.6.13) or card=19 (if kernel < 2.6.13) and use drivers:<br />
*cx88_dvb <br />
*cx8802 <br />
*cx8800 <br />
*cx88_blackbird (connexant ref. design)<br />
|[[http://www.sandbox.de/dvb-t/TerraTec_Cinergy_1400_DVB-T_PCI.jpg]]<br />
|- valign="top"<br />
|[[TerraTec Cinergy HT PCI|Cinergy HT PCI]] <br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T, Analog TV, Radio<br />
|<br />
* '''Tuner''': Thomson [[TT 7579]]<br />
* '''Chipset''': Philips [[Philips_SAA7134|SAA7134]]<br />
* '''Analog Tuner''': tda8290+75<br><br />
* '''Digital Chipset''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Works with Module saa7134 for analog TV and saa7134-dvb for DVB-T<br />
* Drivers from linuxtv.org work fine, no special options needed.<br />
* Has remote included, does not work for me in linux so far.<br />
* PCI subsystem ID: 153b:1175<br />
* Note: There is an unsupported newer revision under the same name, see below.<br />
|<br />
|- valign="top"<br />
| style="white-space:nowrap" | New [[Cinergy HT PCI]]<br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T<br />
|Chipset [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Newer revision of TerraTec Cinergy HT PCI<br />
* PCI subsystem ID: 153b:1177<br />
* DVB-T working with at least 2.6.35 vanilla, cx23885 + zl10353<br />
|<br />
|}<br />
<br />
=== [[TwinHan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]] [http://www.twinhan.com]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[Hama]] [[DVB-T PCI-Karte]]<br />
|[http://www.twinhan.com/product_terrestrial_4.asp]<br />
<br />
|- valign="top"<br />
|[[DTV Ter PCI (A&D)]] [http://www.conrad.de/script/twinhan_dtv_ter.sap]<br />
VP-30540<br />
|ca. 70 €<br />
|Works ok with FC4 latest 2.6 kernel and cx88xx option card=42.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Conexant]] [[Conexant CX2388x|CX23883]]<br />
* [[Philips]] FMD1216ME<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
You will see 4 new PCI-Devices:<br />
* 14f1:8800 Conexant CX23880/1/2/3 PCI Video and Audio Decoder<br />
* 14f1:8801 unknown<br />
* 14f1:8802 unknown<br />
* 14f1:8804 unknown<br />
<br />
The non-DVB-T (analog-tuner) evtl. works running<br />
modprobe cx88xx tuner=63<br />
<br />
EDIT: Got DVB-T to work with option card=42:<br />
<br>cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro<br />
<br>Playback is smooth the earlier comment about Jekryness was due<br />
<br>to not have overlay switched on. <br />
<br>The card even looks like the digitalnow DNTV Live! DVB-T Pro [http://www.digitalnow.com.au/product_pages/DNTV_Pro.html]<br />
|[http://www.mcsat.co.uk/catalog/images/ter-D+A.gif]<br />
|- valign="top"<br />
|[[TwinHan 3506 Hybrid|3506 Hybrid]]<br />
<br />
[http://www.twinhan.com/product_D%2BA_3056_1.asp]<br />
<br />
|~ £25 in UK<br />
|Works ok with FC7 latest 2.6 kernel and saa7134 module, card=109.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
I<sup>2</sup>C gate tuning problem, you'll need to compile the driver with a small change<br />
|<br />
|}<br />
<br />
=== Ultraview ===<br />
* [[DViCO_FusionHDTV_DVB-T1|Ultraview DVB-T Plus]]<br />
<br />
=== [[Yuan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Stratford PG300]] <br />
<br />
[http://www.yuan.com.tw/en/products/vdo/vdo_PG300.html]<br />
|AUD $45<br />
|DVB, VDR possible<br><br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]] [[Conexant CX22702|CX22702-15]] <br />
|<br />
* Antenna in<br />
* IR in<br />
* Antenna Loop out<br />
|<br />
* Remote & IR-receiver included<br />
* DVB Works with "options cx88xx card=43"<br />
* Remote '''Not''' Working<br />
* Includes Low-Profile bracket<br />
|<br />
[http://www.gamedude.com.au/yuan]<br />
|<br />
<br />
|-<br />
| [[Yuan MPC 788 Hybrid Mini-PCI]]<br />
<br />
[http://www.yuan.com.tw/jp/products/tuner/productscontent3.htm]<br />
| $25USD<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive xc3028<br />
* Demod: ZL10353<br />
* Demux: CX23883<br />
|<br />
* Antenna In<br />
<br />
|<br />
* Remote and external antenna included.<br />
* Same components as Winfast DTV1800 card.<br />
* Analog works with "options cx88xx card=81" in "/etc/modprobe.d/video4linux"<br />
* Tested analog with MPlayer.<br />
* Basic testing with Kaffeine. Kaffeine detected the card and scanned for channels, however testing was done in Canada where no DVB-T signal exist.<br />
|<br />
<br />
|}<br />
<br />
== Currently Unsupported DVB-T PCI cards==<br />
{{help to support}}<br />
<br><br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br><br />
<br>Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures''<br />
|- valign="top"<br />
|'''[[Pinnacle]]<br><br />
[[Pinnacle PCTV DVB-T PCI (250i)|PCTV DVB-T PCI (250i)]]''' [http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+(DVB-S_DVB-T)/PCTV+DVB-T+PCI+(250i).htm]<br><br />
<br><br />
~£26 in the UK<br />
|No support yet<br />
|<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/screenshots/PCTV_DVB-T_PCI_persp_midres.jpg]<br />
<br />
|- valign="top"<br />
|'''[[X3M digital S.A. | X3M tv-tuners]]<br><br />
[[x3m digital S.A HPC2000|HPC2000]]'''<br>EUR ~45 (Euro)<br />
|No support yet<br><br />
|<br />
*Chipset: Conexant CX23880<br />
*Multiplexer-Demultiplexer: hcf4052<br />
*Demodulator: ZL10353/WJCE6353 <br />
*Tuner: xc3028 (Xceive)<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
* Supports MPEG-2 and MPEG-4(H264)<br />
* it seems to be a [http://www.geniatech.com/dwonloadf/d_dvbt.htm Geniatech DVB-T TV Hybrid X8000MT]; windows drivers of both cards are the same.<br />
* an open source linux driver, seemingly based on an older checkout of the V4L HG tree, can be found at [http://www.geniatech.com/driver-eng/linux/v4l-dvb-experimental-x8000mt.tar.gz]<br />
* the firmware, which the 2.6.31-rc1 kernel tuner driver does not seem to have a loader for, is located at [http://www.geniatech.com/driver-eng/linux/fw25_linux.tar.gz]<br />
* this geniatech firmware is identical with the X3M firmware provided here[http://www.x3mtv-tuners.de/uploads/media/HPC2000_x86_Linux_Treiber.zip] This supports the notion that those cards are in fact identical<br />
* the xc3028-v27.fw firmware extracted from other Xceive tuner based cards' windows drivers via extract_xc3028.pl does not seem to work on this card<br />
* from skimming the source code of the xc3028 driver(kernel and geniatech) it seems to me that the xc3028-v27.fw firmware is simply a binary compound of the same components(though the length of the chunks seems to differ) that are provided in the geniatech firmware.<br />
|<br />
[[Image:Hpc2000.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|'''[[Compro Technology | Compro]]<br><br />
[[Compro VideoMate DVB-T220|VideoMate DVB-T220]]'''<br />
|No support yet<br><br />
Detects as a T200<br />
|<br />
*Chipset: SAA7130<br />
*COFDM Demodulator: MT352<br />
*Tuner: [[Quantek QT1010]]<br />
|<br />
*Antenna In<br />
*S-Video in<br />
*Remote In<br />
|<br />
* DVB-T Card<br />
* Comes with remote control.<br />
|<br />
[[Image:VideoMate_DVB-T220.JPG|thumb|120px|]]<br />
|}<br />
<br />
<br />
[[Category:DVB-T| ]]<br />
[[Category:DVB-T PCI Cards| ]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS_PLUS&diff=31687Leadtek WinFast DTV2000DS PLUS2013-02-07T05:35:55Z<p>Michaelp: /* Use with Ambrosa's driver in Xubuntu 12.04 */</p>
<hr />
<div>===Overview===<br />
<br />
This is a dual tuner DVB-T PCI card. It uses an onboard VIA PCI-USB bridge so behaves like a USB device, with USB ID 0413:6f12.<br />
<br />
It has the [[RealTek RTL2832U]] chipset, unlike its sibling the [[Leadtek WinFast DTV2000DS]] which has the Afatech AF9015 and AF9013 chipset. Therefore drivers for the non-plus version will certainly not work.<br />
<br />
Note that the official Leadtek product page [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=specification] falsely states that it has the AF9015 and AF9013.<br />
<br />
The card is currently unsupported, but it is possible to get it working with the existing RTL2832U drivers - see below. It may be similar to the [[Mygica T1800B]] PCI card, since they have very similar general specifications.<br />
<br />
===Identification===<br />
<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 003 Device 002: ID 0413:6f12 Leadtek Research, Inc. <br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0 <br />
bDeviceProtocol 0 <br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6f12 <br />
bcdDevice 1.00<br />
iManufacturer 1 Realtek<br />
iProduct 2 WinFast DTV2000 DS Plus<br />
iSerial 0 <br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 25<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 4 USB2.0-Bulk&Iso<br />
bmAttributes 0xa0<br />
(Bus Powered)<br />
Remote Wakeup<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 1<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 255 Vendor Specific Subclass<br />
bInterfaceProtocol 255 Vendor Specific Protocol<br />
iInterface 5 Bulk-In, Interface<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0 <br />
bDeviceProtocol 0 <br />
bMaxPacketSize0 64<br />
bNumConfigurations 2<br />
Device Status: 0x0000<br />
(Bus Powered)</pre><br />
<br />
===Use with Ambrosa's driver in Xubuntu 12.04===<br />
<br />
I have got this card to work using this driver [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0] in Xubuntu 12.04 with the 3.2.0.37-generic kernel. I followed the instructions in the driver's README and made one minor edit. The full process is described here. <br />
<br />
1- Install compile kit, linux headers and git<br />
<pre>$ sudo apt-get install build-essential<br />
$ sudo apt-get install linux-headers-$(uname -r)<br />
$ sudo apt-get install git </pre><br />
<br />
2- clone the repository using git and go to source directory<br />
<pre>$ git clone https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0.git<br />
$ cd DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0 </pre><br />
<br />
3- edit Makefile to change the option INCLUDE_EXTRA_DVB to suit the 3.2 kernel. This means commenting out the line "INCLUDE_EXTRA_DVB := include-300" and uncommenting the line "INCLUDE_EXTRA_DVB := include-320". Obviously don't do this if you have a 3.0 kernel. (3.0 kernel is untested with this card).<br />
<br />
4- '''Now the special step!''' Edit the header file rtl2832u.h so that our device is recognised. The simplest way is to find the line <br/><br />
"#define USB_PID_LEADTEK_WARM_2 0x6F11" <br/><br />
and change the last digit to 2 so it reads<br/><br />
"#define USB_PID_LEADTEK_WARM_2 0x6F12". <br/><br />
This means we have stolen the Product ID of another Leadtek device that uses this driver. Simply adding a new line like <br/><br />
"#define USB_PID_LEADTEK_WARM_4 0x6F12" <br/><br />
is not sufficient.<br />
<br />
5- Now continue with the README instructions. Compile the code, install and insert the module.<br />
<pre>$ make clean<br />
$ make<br />
$ sudo make install<br />
$ sudo modprobe dvb_usb_rtl2832u</pre><br />
<br />
The driver module should now load automatically each time you boot. This method worked with [[Scan]] and [[VLC media player|VLC]]. (Create a channels.conf file with scan, then open the file in VLC, or run $ vlc channels.conf).</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS_PLUS&diff=31684Leadtek WinFast DTV2000DS PLUS2013-02-06T04:19:12Z<p>Michaelp: /* Use with Ambrosa's driver in Xubuntu 12.04 */</p>
<hr />
<div>===Overview===<br />
<br />
This is a dual tuner DVB-T PCI card. It uses an onboard VIA PCI-USB bridge so behaves like a USB device, with USB ID 0413:6f12.<br />
<br />
It has the [[RealTek RTL2832U]] chipset, unlike its sibling the [[Leadtek WinFast DTV2000DS]] which has the Afatech AF9015 and AF9013 chipset. Therefore drivers for the non-plus version will certainly not work.<br />
<br />
Note that the official Leadtek product page [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=specification] falsely states that it has the AF9015 and AF9013.<br />
<br />
The card is currently unsupported, but it is possible to get it working with the existing RTL2832U drivers - see below. It may be similar to the [[Mygica T1800B]] PCI card, since they have very similar general specifications.<br />
<br />
===Identification===<br />
<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 003 Device 002: ID 0413:6f12 Leadtek Research, Inc. <br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0 <br />
bDeviceProtocol 0 <br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6f12 <br />
bcdDevice 1.00<br />
iManufacturer 1 Realtek<br />
iProduct 2 WinFast DTV2000 DS Plus<br />
iSerial 0 <br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 25<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 4 USB2.0-Bulk&Iso<br />
bmAttributes 0xa0<br />
(Bus Powered)<br />
Remote Wakeup<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 1<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 255 Vendor Specific Subclass<br />
bInterfaceProtocol 255 Vendor Specific Protocol<br />
iInterface 5 Bulk-In, Interface<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0 <br />
bDeviceProtocol 0 <br />
bMaxPacketSize0 64<br />
bNumConfigurations 2<br />
Device Status: 0x0000<br />
(Bus Powered)</pre><br />
<br />
===Use with Ambrosa's driver in Xubuntu 12.04===<br />
<br />
I have got this card to work using this driver [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0] in Xubuntu 12.04 with the 3.2.0.37-generic kernel. I followed the instructions in the driver's README and made one minor edit. The full process is described here. <br />
<br />
1- Install compile kit, linux headers and git<br />
<pre>$ sudo apt-get install build-essential<br />
$ sudo apt-get install linux-headers-$(uname -r)<br />
$ sudo apt-get install git </pre><br />
<br />
2- clone the repository using git and go to source directory<br />
<pre>$ git clone https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0.git<br />
$ cd DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0 </pre><br />
<br />
4- edit Makefile to change the option INCLUDE_EXTRA_DVB to suit the 3.2 kernel. This means commenting out the line "INCLUDE_EXTRA_DVB := include-300" and uncommenting the line "INCLUDE_EXTRA_DVB := include-320". Obviously don't do this if you have a 3.0 kernel. (3.0 kernel is untested with this card).<br />
<br />
5- '''Now the special step!''' Edit the header file rtl2832u.h so that our device is recognised. The simplest way is to find the line <br/><br />
"#define USB_PID_LEADTEK_WARM_2 0x6F11" <br/><br />
and change the last digit to 2 so it reads<br/><br />
"#define USB_PID_LEADTEK_WARM_2 0x6F12". <br/><br />
This means we have stolen the Product ID of another Leadtek device that uses this driver. Simply adding a new line like <br/><br />
"#define USB_PID_LEADTEK_WARM_4 0x6F12" <br/><br />
is not sufficient.<br />
<br />
6- Now continue with the README instructions. Compile the code, install and insert the module.<br />
<pre>$ make clean<br />
$ make<br />
$ sudo make install<br />
$ sudo modprobe dvb_usb_rtl2832u</pre><br />
<br />
The driver module should now load automatically each time you boot. This method worked with [[Scan]] and [[VLC media player|VLC]]. (Create a channels.conf file with scan, then open the file in VLC, or run $ vlc channels.conf).</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31683Leadtek WinFast DTV2000DS2013-02-06T04:10:44Z<p>Michaelp: /* Plus version is unsupported */</p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
===Plus version is different===<br />
<br />
Be warned that the [[Leadtek WinFast DTV2000DS PLUS]] has a different chipset, so requires different drivers. It is currently not supported out of the box, though it can be made to work in some circumstances.<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=DVB-T_PCI_cards&diff=31674DVB-T PCI cards2013-02-05T11:27:19Z<p>Michaelp: /* Currently Unsupported DVB-T PCI cards */</p>
<hr />
<div>On this page you will find information regarding [[DVB-T]] [[PCI]] cards.<br />
<br />
{{non-exhaustive list}}<br />
<br><br />
==Supported DVB-T PCI Cards==<br />
The following table lists the confirmed working DVB-T PCI cards and provides a brief summary of their features and components. If you need more technical information on a device, have a look at its specific wiki article. <br />
<br />
=== [[ASUS]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Type'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[ASUS My Cinema-P7131 Hybrid|My Cinema-P7131 Dual]]<br />
<br />
[[Image:ASUS-MyCinema-P7131-Dual-box.jpg|thumb|120px]]<br />
|DVB-T + Analog [http://uk.asus.com/products.aspx?l1=18&l2=83&l3=252&l4=0&model=547&modelmenu=1]<br />
|ca. 45 €<br />
|DVB, VDR<br />
| <br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* DVB-T/FM in<br />
* Analog TV in<br />
* IR in<br />
* AV in (with cable to composite, S-video and audio)<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* With Low-Profile bracket<br />
* Supports FM-radio<br />
* Needs firmware (dvb-fe-tda10046.fw); see the [[ASUS My Cinema-P7131 Hybrid|P7131 article]]<br />
- Following the above article works under Ubuntu 7.10 (Gutsy Gibbon) using Kaffeine 0.8.5 (running the Xine Player Engine ewith the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package)<br />
|[http://www.bttv-gallery.de/HPIM2609.JPG_asus_tiger_302_a.jpg]<br />
[[Image:ASUS-MyCinema-P7131-Dual.jpg|thumb|50px]]<br />
[[Image:ASUS-MyCinema-P7131-Dual-rear.jpg|thumb|50px]]<br />
|}<br />
<br />
=== [[AVerMedia]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T (A761) | AVerTV DVB-T (A761)]]<br />
<br />
<strike>[http://www.avermedia.de/Products/TV_Tuner/DVB-T/main.htm]</strike><br />
<br />
oldest AVerTV DVB-T model<br />
|ca. 90 €<br />
|DVB, VDR<br />
<br />
[http://www.vaslet.de]<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
* S-Video in<br />
* Composite in<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* Low-Profile-Card<br />
* Difference compared to 771 is the Tuner and Composite-in<br />
|<strike>[http://www.avermedia.de/Products/images/Products/DVB-T_FB.jpg]</strike><br />
[http://www.vaslet.de/content/dvbt/averdvb_a761_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_761.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 771 (A771) | AVerTV DVB-T 771 (A771)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt771.asp?show=1]<br />
|ca. 90 €<br />
|DVB, VDR possible<br />
<br />
[http://www.gossamer-threads.com/lists/mythtv/users/72584] [http://www.frokaschwei.net/avtv771/avermedia.html], [http://www.mail-archive.com/linux-dvb@linuxtv.org/msg17579.html] [http://www.vaslet.de]<br />
<br />
Warning some people experience problems with this card search for mt352_read_register on the mailing list.<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-rerceiver included<br />
* Low-Profile-Card<br />
* Difference to the older "761" is the Tuner and the missing Composite-in<br />
|<strike>[http://www.avermedia.de/Products/TV_Tuner/dvbt771/771.jpg]</strike> [http://www.vaslet.de/content/dvbt/averdvb_a771_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_771.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16AR) | AVerTV DVB-T 777 (A16AR)]]<br />
<br />
newest model of the AVerTV DVB-T<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. 65 €<br />
|DVB, VDR ab 2.6.17-rc1<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-receiver included (v4l-dvb needs a patch to properly work)<br />
* Works on Ubuntu 6.10 "almost" out of the box.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:Avermedia777.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16A-C)| AVerTV DVB-T 777 (A16A-C)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. ? €<br />
|DVB<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Tested on 32bit Fedora 9.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:AVER777A16A-C_front.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV Hybrid+FM PCI (A16D)| AVerTV Hybrid+FM PCI (A16D)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI(A16D).asp?show=1#]<br />
|ca. 80 €<br />
| Analogue, kernel 2.6.26; <br />
DVB-T, kernel 2.6.27<br />
<br />
For DVB and experimental support, see [http://mcentral.de/wiki/index.php5/AVerMedia_AverTV_Hybrid_FM_PCI_A16D here], and maybe [http://mcentral.de/wiki/index.php5/AverMedia_Cardbus_Hybrid_TV_FM_E506R here]<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Xceive]] [[Xceive XC3018|XC3018]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|[http://www.avermedia.com/docs/productimage/AVerTV-Hybrid+FM-PCI-b.jpg]<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[AVerMedia AVerTV Hybrid+FM PCI (A16AR)| AVerTV Hybrid+FM PCI (A16AR)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI.asp?show=1]<br />
|<br />
| Yes<br />
FM radio not supported<br />
|<br />
* Philips TD1316A (tuner)<br />
* Philips TDA9887 (analog demodulator)<br />
* Philips SAA7135HL (A/V decoder)<br />
* Zarlink MT352 (DVB-T demodulator)<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|<br />
<br />
|- valign="top"<br />
|[[AVerMedia_AVerTV_DVB-T_Super_007 | AVerTV DVB-T Super 007]]<br />
<br />
[http://www.avermedia.com/EN/Default.aspx?TYPE=vipplayercard.htm&PT=product&tv_TCAT_POS=0&PID=4710710671877]<br />
|ca. 60 €<br />
| Yes (with [http://lists.zerezo.com/video4linux/msg19205.html patch])<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* DVB-T / Analog<br />
* Remote and Infra-red-receiver included<br />
* (this is "Hybrid Super 007" with Analog+DVB-T or "DVB-T Super 007" with only DVB-T?)<br />
|<br />
[[Image:Super_007_box.jpg|thumb|50px|]]<br />
[[Image:Super_007_card.jpg|thumb|50px|]]<br />
|<br />
<br />
*<br />
* DVB-T DUAL LV32TDLX<br />
|}<br />
<br />
=== [[ChainTech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[DTT 1000 PCI]]<br />
<br />
<strike>[http://www.chaintech.com.tw/tw/eng/product_spec.asp?MPSNo=15&PISNo=170]</strike><br />
|ca. 100 €<br />
|DVB, VDR<br> (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Hangs at least older kernels (<2.6.12) unless the bttv module is loaded with parameters "i2c_hw=1 card=0x71". This may cause boot problems when the module is automatically loaded by hotplug.<br />
|<strike>[http://www.chaintech.com.tw/tw/images/Products/DMPD/DTT1000_L.jpg]</strike><br />
|}<br />
<br />
=== [[Club 3D]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[ZAP-TV2202]]<br />
<br />
[http://www.club3d.nl/index.php/products/zaptv/item/11]<br />
<br />
[http://www.club3d.nl/support/manuals/zap-tv/2202/ZAPTV2202_QuickGuide.pdf Manual]<br />
|ca. 67 €<br />
|DVB, Analogue<br />
| Philips [[Philips SAA7131|SAA7131]]<br />
|<br />
* Antenna In<br><br />
* Radio In<br><br />
* S-Video In In<br><br />
|<br />
* Shows up as device 169d:3306<br />
* Installed with command modprobe saa7134 card=94<br />
|<br />
|}<br />
<br />
=== [[Compro Technology|Compro]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[Compro VideoMate T200|VideoMate DVB-T200]]<br />
[http://www.comprousa.com/New/en/product/vmt200.html]<br />
|ca. 37 €<br />
|DVB kernel 2.6.17<br />
| Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br><br />
* S-Video In<br><br />
* Composite In<br><br />
|<br />
* Remote and Infra-red-receiver included <br />
(to get the irda working correctly you may find this mail useful [http://marc.theaimsgroup.com/?l=linux-video&m=113672404400380&w=2] )<br />
* HDTV *(1080i / 720P) ready<br />
* Power on via irda<br />
* warning: problems with poor reception: [http://cvs.mythtv.org/trac/ticket/2664]<br />
|<br />
|}<br />
<br />
=== [[DViCO]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[FusionHDTV Dual Digital 4]]<br />
<br />
[http://www.fusionhdtv.co.kr/ENG/products/DVBTdual4.aspx]<br />
|<br />
* DVB, VDR<br />
* <strike>works with [http://fremnet.net/article/228/dvico-fusionhdtv-dual-digital-4-under-linux patches] - (non Australian users should ignore the dd4.au.patch patch and not use the xc3028.au2.fw firmware).</strike> See https://help.ubuntu.com/community/DViCO_Dual_Digital_4<br />
Revision 2 of this card has just been released ([http://mandmservices.com.au/dvico image]). The new card uses a DIBCOM tuner and modulator <strike>and does not work under the current driver.</strike><br />
<br><br />
The linuxTV drivers are now updated, the revision two works beautifully. The changes do not yet seem to be merged with the Linux kernel (2.6.27), the link above should help you install the drivers. The Rev 2 card may not work properly with older kernels such as 2.6.22 (AMD 780G chipsets, USB disconnects), even using the latest linuxTV drivers. The following link also has some useful information: http://ubuntuforums.org/showthread.php?t=616103 <br />
|Rev 1- Zarlink ZL10353<br />
Rev 2- Dibcom 7070pb1 tuner, CY7C68013A USB peripheral controller, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna in<br />
* IR In<br />
|<br />
* Dual DVB-T tuner card<br />
* Supports HD streams<br />
* <strike>Requires patching</strike><br />
* Is actually two USB devices attached though a Via PCI-to-USB bridge<br />
* Uses <tt>dvb-usb-cxusb</tt> module<br />
* Rev 2 uses <tt>dib0070, dib7000p, dib7000m, dib3000mc, dibx000_common</tt> modules<br />
* Includes low-profile PCI bracket<br />
|<br />
[[Image:DViCO_FusionHDTV_Dual_Digital_4.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|<br />
FusionHDTV Dual Digital 2<br />
|<br />
* DVB-T<br />
| <br />
* CX23880<br />
|<br />
* Antenna In<br />
* IR In<br />
* S-Video In<br />
* USB Type-B connector<br />
|<br />
* Dual PCI/USB device - has a loopback cable<br />
* Works out of the box in Ubuntu 10.04 (and earlier versions)<br />
* Low-Profile<br />
|<br />
(No Picture)<br />
|}<br />
<br />
* [[DViCO FusionHDTV DVB-T1]]<br />
* [[DViCO FusionHDTV DVB-T Lite]]<br />
<br><br />
<br />
=== [[GDI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[GDI Black Gold]]<br />
<br />
[http://www.blackgold.tv/products/digital.htm]<br />
|<br />
|S-Video support works (Small patch which is now in CVS). DVB doesn't work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]]/Front End CX22702/Tuner Philips TU1216/[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]] demodulator<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
|Like this, but slightly longer with a heat sink. <br><br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_Plan.jpg Card]<br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_End.jpg Connectors]<br />
|}<br />
<br />
=== [[Geniatech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech X8000-MT|X8000-MT]]<br />
<br />
[http://www.geniatech.com/pa/x8000t.asp]<br />
| 45 €<br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23883]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 <br><br />
Identical board to [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[[Image:X8000T-DVBT-PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Hama]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[DVB-T PCI-Karte]]<br />
<br />
<strike>[http://www.hama.de/portal/articleId*110877/action*2563/searchMode*1/bySearch*dvb-t]</strike><br />
|ca. 80 €<br />
|DVB, VDR possible<br><br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|[[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[TwinHan]] [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]]<br />
|[http://www.hama.de/bilder/00049/abb/00049019abb.jpg]<br />
|}<br />
<br />
=== [[Hauppauge]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|Old [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(until 06/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* '''Since 07/2004 Hauppauge have been shipping a new Nova-T (see below)'''<br />
* Comes with remote<br />
[[Image:Hauppauge_nova-t_remote.jpg|thumb|30px|]]<br />
|[[Image:Hauppauge_nova-t_old.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|New [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(since 07/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|ca. 100 €<br />
|Works with patches from [http://dl.bytesex.org/patches/] or >= kernel 2.6.12<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* Remote In<br />
|<br />
* Drivers included in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* Comes with same remote as the older model<br />
|[http://sulu.sohanet.de/tmp/]<br />
[[Image:Hauppauge_nova-t_juli2004.jpg|thumb|50px|]]<br />
[[Image:Hauppauge_nova-t_juli2004_Packung.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge WinTV-NOVA-T-500|WinTV-NOVA-T-500]]<br />
<br />
(since 09/2006) [http://www.hauppauge.co.uk/pages/products/data_novat500.html]<br />
|ca. 100 €<br />
|works with v4l-dvb hg from 2006-09-20 [http://www.linuxtv.org/repo/] or kernel >= 2.6.19 - <br />
|[[DiBcom]] [[DiBcom DiB7xxx|DiB0700]]<br />
|<br />
* Antenna In<br />
* Remote In (should now be working)<br />
|<br />
*Dual DVB-T tuner card.<br />
*As of 28/08/2008, according to Michael Krufky, all currently released versions, including the Diversity model, are supported by head of v4l-dvb hg, and the driver is likely to stay ahead of new card releases in the future.<br />
*PCI 2.2 card using 3.3V. Failed to run on PCI 2.1 system.<br />
|<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1300|WinTV-HVR-1300]] (since 07/2005)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1300.html]<br />
(HVR-1100 is similiar to HVR-1300, but without MPEG hardware encoder)<br />
|ca. 130 €<br />
|Digital & Analogue working in repository [http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=3e90edbf7c53584f109fe091d7380e8bda9fa282;style=gitweb]. Encoder support being worked on.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* DVB support in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* This card has tuning problems in MythTV and Kaffeine (works with tzap). See the card page.<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|[http://sulu.sohanet.de/tmp/][[Image:100 7999.JPG|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1110|WinTV-HVR-1110]] (since 09/2006)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1110 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10046 chipset)<br />
|ca. 70 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported with the latest 2.6.18 kernel, need latest v4l-dvb (mercurial) to work on older kernels. See [http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_Mercurial].<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1120|WinTV-HVR-1120]] (since 05/2009)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1120 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10048 chipset)<br />
|ca. 50 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported since kernel 2.6.31. <br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-3000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr3000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hvr3000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hvr3000.jpg|thumb|50px|]]<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-4000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr4000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, DVB-S2 and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|50px|]]<br />
<br />
|}<br />
=== [[Jactek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech JH-600|JH-600]]<br />
<br />
[http://www.jactek.com.tw/product_pctv/product_jh600.html]<br />
| <br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-2388x]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Identical board to [[Geniatech X8000-MT|X8000-MT]], [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[http://www.jactek.com.tw/product_pctv/images/product_jh600_34.jpg]<br />
|}<br />
<br />
=== [[KNC1]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[KNC1 TV-Station DVB-T | TV-Station DVB-T]] <br />
<br />
[http://www.kncone.de/d/produkte/digital_dvb_t.htm]<br />
<br />
|ca. 80 €<br />
|DVB, ? <br />
|Philips [[Philips SAA7146|SAA7146]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* [[Common Interface]]<br />
| <br />
|<br />
|}<br />
<br />
=== [[KWorld]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[KWorld_V-Stream_Xpert_DVB-T_PCI|V-Stream Xpert DVB-T PCI]] <br />
<br />
[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.html]<br />
|ca. 80 €<br />
|DVB, VDR possible [http:///www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00716.html] New card:[http://www.manenti.org/blog/archives/000089.html]<br />
Full support :[[http://linuxtv.org/wiki/index.php/KWorld_V-Stream_Xpert_DVB-T_%28tuner_THOMSON_DTT_7579%29]]<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite In<br />
* Remote In<br />
|<br />
* Remote & IR-receiver included<br />
* There are three versions of this card, one with a Samsung tuner similar to the AVerMedia 771, another with a Thomson tuner (similar to the Nova-T 90002) and another with Thomson tuner DTT 7579. All versions are supported. <br />
|[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.jpg]<br />
|- valign="top"<br />
|[[KWorld DVB-T 220 | DVB-T 220]]<br />
<br />
[http://www.kworld.com.tw/en/kworld/body/Products/D+A/DVB-T220.htm]<br />
|<br />
|DVB, analogue<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In (two)<br />
* FM In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe saa7134-dvb' to enable DVB.<br />
| <br />
[[Image:kworld_DVB-T220.jpg|thumb|120px]]<br />
<br />
|- valign="top"<br />
|[[KWorld_DVBT-100 | DVBT-100]]<br />
<br />
[http://www.kworld.com.tw/en/index_digital.htm]<br />
|<br />
|DVB, analogue<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite video In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe cx88-dvb' to enable DVB. Suspected same card as KWorld_V-Stream_Xpert_DVB-T_PCI. <br />
|<br />
<br />
|- valign="top"<br />
|[[KWorld DVB-T PC160-2T | DVB-T PC160-2T ]]<br />
<br />
[http://www.kworld.com.tw/product_overview.aspx?P_ID=215]<br />
|<br />
| '''NOTE: This card is IDENTICAL to Leadtek DTV2000DS, except for the USB ID, the remote, and the sticky label on the tuners!'''<br />
So please refer to DTV2000DS for extra info.<br />
Dual DVB-T tuners, also known as PEAK DVB-T Dual tuner PCI (221544AGPK)<br />
Working as single tuner card (at least) on 2008-06-05<br />
http://linuxtv.org/hg/~anttip/af9015-mxl500x-copy-fw/<br />
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files<br />
Ref http://marc.info/?l=linux-dvb&m=121268349100641&w=2<br />
A single tuner variant (PC-160-T) is now also supported.<br />
|[[Afatech AF9015|AF9015]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Note that curent kernel versions do not have a keymap for the provided remote, see here for some info about setting up a custom keymap: http://francisfisher.me.uk/problem/2012/kworld-pc160-2t-remote-control-on-ubuntu-linux-11-10-2/<br />
* From my experience, the latest driver (23/03/12) has some bugs that require daily hard resets of the device.<br />
* KWorld support are not interested in providing any assistance getting the device working: "Sorry,we can't help you to solve the remote problem in Linux,since we don't highlight/mention that it can support this system. If you have the problem in Windows system,we are willing to help you solve it."<br />
| <br />
[[Image:Kworld pc160.jpg|thumb|120px]]<br />
<br />
<br />
|}<br />
<br />
=== [[Leadtek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 S|WinFast DTV1000 S]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=382&check=f]<br />
|<br />
| DVB<br />
| [[Chipset NXP 18271 + 10048 + 7130]]<br />
|<br />
* TV Antenna In<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Drivers will be included in 2.6.33 Kernel. Meanwhile can be downloaded http://kernellabs.com/hg/~mkrufky/dtv1000s<br />
* The tuner works with Mythbuntu 9.10 as does remote.<br />
| <br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 T|WinFast DTV1000 T]]<br />
[http://www.leadtek.com.tw/eng/tv_tuner/overview.asp?lineid=6&pronameid=220]<br />
|<br />
| DVB<br />
| [[Conexant Systems, Inc.|Conexant]] based system see [[LR6650]]<br />
|<br />
* TV Antenna In<br />
* TV antenna out (loop through)<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Since kernel 2.6.15-rc1<br />
* The tuner works with Mythbuntu 7.10 (i386) but the remote doesn't.<br />
* In Australia, this card appears to have been superseded by the DTV 1000 S which uses a different chipset and apparently is not supported.<br />
| [http://www.leadtek.com.tw/eng/tv_tuner/image/winfast_dvt1000t_2.jpg]<br />
<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H]]<br />
| $AUD 80<br />
| DVB<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 6-pin for video in<br />
|<br />
* DVB-T works with Ubuntu 7.10 (i386), Kaffeine 0.8.5 and the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package<br />
* FM tuner is not found, no radio function<br />
|<br />
<br />
|-<br />
| [[Leadtek WinFast DTV1800 H|WinFast DTV1800 H]]<br />
| $AUD 75<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 (on latest cards on sale in Aus), earlier cards had Xceive xc3028<br />
* Demod:ZL10353<br />
* Demux:CX23883<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
* Comes with remote control<br />
|<br />
* Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html]. Tested with Kaffeine and Australian DVB-T Broadcasts.<br />
* IRC works but default key mapping is incorrect with KDE4 - needs work.<br />
|[http://dev.gentoo.org/~dragonheart/winfast/_MG_1893.JPG]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000DS|WinFast DTV2000DS]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530]<br />
| $AUD 65<br />
| DVB-T<br />
|<br />
* '''Tuner''': '''NXP TDA18211, but detected as TDA18271 by V4L drivers'''<br />
* '''Chipset''': AF9015 + AF9013<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x ph jack for IR sensor<br />
|<br />
* Dual DVB-T tuner card<br />
'''* Read the page regarding the working status of this card.'''<br />
* Supports HD streams<br />
* Is actually two USB devices attached though a VIA VT6210L PCI-to-USB bridge<br />
* Uses dvb_usb_af9015 and af9013 modules<br />
* Includes low-profile PCI bracket<br />
* Includes remote and Infra-Red sensor<br />
* Warning: The DTV2000DS '''PLUS''' is a completely different card and is unsupported. <br />
| [[Image:Leadtek dtv 2000ds 2s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|50px]]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H rev J]]<br />
| $AUD 75<br />
| DVB Analog Hybrid<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX23881|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* 1 x 4 pin audio output connector (internal CD audio type)<br />
|<br />
* Random success with analog OR DVB-T video no sound<br />
* See: [http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H]:<br />
* Add "cx88-dvb" to /etc/modules<br />
* Add "options cx88xx card=51" to /etc/modprobe.d/options<br />
* Add "options cx88xx card=51,51" to /etc/modprobe.d/options if using two cards<br />
* Try adding "options cx88-alsa index=1,2" to /etc/modprobe.d/options and use /dev/dsp in MythTV Frontend if having sound issues in MythTV<br />
* DTV + audio worked out of box in Mythbuntu 8.10 and Ubuntu 8.10. <br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H Plus|WinFast DTV2000 H Plus]]<br />
| $AUD 100<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 on older cards (eg 107d:6f42), Xceive XC3028 on newer cards (eg 107d:6f44)<br />
* Demod:ZL10353<br />
* Demux:CX2388x<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* Comes with remote control<br />
|<br />
* 107d:6f42: Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html].<br />
* 107d:6f44: DVB-T works with "options cx88xx card=81" (using the vanilla v4l) in /etc/modprobe.d/video4linux but none of the other inputs work. Analog works with "options cx88xx card=51" but DVB-T doesn't, even when tuner=71 is specified.<br />
|<br />
<br />
|}<br />
<br />
=== [[LifeView]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T|FlyDVB-T]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt.htm]<br />
|<br />
|DVB-T only<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Composite in<br />
* Remote In<br />
|<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR301.jpg|thumb|85px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Duo|FlyDVB-T Duo]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_duo.htm]<br />
|<br />
|DVB-T and Analog<br />
|Philips [[SAA7133]]<br />
|<br />
* Cable/Antenna In (two)<br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR306.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|[[LifeView FlyDVB Trio| FlyDVB Trio]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvb_trio.htm]<br />
|<br />
|DVB-T, Satellite and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Satellite Antenna In<br />
* Digital Antenna In<br />
* Analog Antenna In<br />
* S-Video/Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:photo_dvb_trio.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Hybrid|FlyDVB-T Hybrid]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_hybrid.htm]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
|<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[LifeView FlyDVB-T Hybrid MCE PRO|FlyDVB-T Hybrid MCE PRO]]<br />
|<br />
|DVB-T and Analog HW encoder<br />
|<br />
* Philips [[SAA7131]] <br />
* Vixs encoder<br />
|<br />
* Cable/Antenna In <br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Hybrid analog/digital HW encoder card<br />
* Supported by Linux kernel 2.6.15<br />
|[[Image:323.jpg|thumb|120px|]]<br />
|}<br />
<br />
=== [[Lorenzen]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[SL DVB-T PCI]] <br />
<br />
<strike>[http://www.lorenzen.de/produkte/cgi-bin/iboshop.cgi?showd60!,3709831960,3930]</strike><br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
* Can support +5V power supply for Antenna (Jumper on board)<br />
| <strike>(Old Design): [http://www.lorenzen.de/produkte/bilder/3922%20200.jpg]</strike><br />
[[Image:Lorenzen_SL_DVB-T_PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Medion]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Medion CTX953 | CTX953]] <br />
<br />
(a.k.a Creatix CTX 953: [http://www.creatix.de/produkte/multimedia/ctx953.htm])<br />
|<br />
| DVB-T tested and works with 2.6.29, analog is untested by me. I suspect it works, too.<br />
|<br />
* NXP SAA 7131E/03/G<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
* NXP 8275AC1<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Audio-In (3.5mm)<br />
* Composite-In<br />
|<br />
* ml-thread: [http://article.gmane.org/gmane.comp.video.video4linux/34255]<br />
|<br />
[[Image:Medion_CTX953_front.jpg|thumb|150px|]]<br />
[[Image:Medion_CTX953_back.jpg|thumb|150px|]]<br />
<br />
|- valign="top"<br />
|<br />
Philips TV/Radio Card CTX918, (Medion 7134), PCI<br />
<br />
|~6€, Ebay Germany<br />
|DVB-T working, FM apparently too ([http://linuxtv.org/v4lwiki/index.php/Generic_SAA7134_Card_Installation Instructions])<br />
|<br />
<br />
* FMD1216ME<br />
* Philips SAA7134HL<br />
* SV92PL<br />
* CSP1034S<br />
<br />
|<br />
* Antenna In<br />
* FM In<br />
|<br />
[http://www.creatix.de/support/download/gruppe6/CTX918_spec.pdf Spec]<br />
[http://www.creatix.de/support/typ.php?tid=62&gid=6 Link to OEM]<br />
|<br />
[[Image:7134.jpg|thumb|150px|]]<br />
|}<br />
<br />
=== [[MSI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D|TV@nywhere A/D]]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
* clone of LifeView FlyDVB-T Hybrid<br />
* requires "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1]] <br />
|Around $65 AUD<br />
|'''Unsupported'''<br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* As of kernel 2.6.23.13 the frontend seems to not work, even with "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1 alternate]] <br />
|Around $65 AUD<br />
|Analog and DVB-T (partially)<br />
|<br />
*Philips [[SAA7131E]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
*Tuner 8275AC1<br />
|<br />
* FM Antenna in<br />
* TV Antenna in<br />
* AV input (comes with adaptor that allows connection of s-video or composite video as well as RCA connectors for audio) <br />
* IR-Remote<br />
|<br />
* This card mostly works with the latest drivers as of 2008-02-08 (tested using mythbuntu 2.6.22-14-generic kernel). There is a problem with unreliable firmware loading. The card only works if the firmware loads correctly.<br />
* Requires card=109<br />
|<br />
[[Image:MSI TV@nywhere A-D v1.1.JPG|thumb|120px]]<br />
|}<br />
<br />
<br />
=== [[Mygica]] ===<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Mygica T1800B|T1800B]]<br />
| 70 AUD<br />
|Dual DVB-T, DAB+ (untested), Remote Control (untested), <br />
|RTL2832U<br />
|<br />
* Antenna In<br />
* AV In<br />
|Requires out-of-tree drivers (see documentation)<br />
|[http://www.auspcmarket.com.au/info/EL-MY-T1800B/]<br />
|- valign="top"<br />
|[[Mygica T188|T188]]<br />
| 30 AUD<br />
|Single DVB-T, DAB+ (untested), Remote Control (untested)<br />
|RTL2832U, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* Uses same (out-of-tree) drivers as the T1800B.<br />
* Driver appears to have bug which prevents getting a signal lock if more than one of these cards are present.<br />
|[http://i49.tinypic.com/68rfon.jpg]<br />
|}<br />
<br />
=== [[Nebula]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Nebula DigiTV PCI|DigiTV PCI]]<br />
<br />
[http://www.nebula-electronics.com/information/info.asp?Code=0001]<br />
|ca. 150 €<br />
|DVB,VDR<br> NXT6000 demod supported by recent kernels, mt352 demod will be supported by kernels >= 2.6.14-rc1.<br />
|<b>Demod Chip</b><br><br />
<i>Old board:</i><br> <br />
[[ATI NXT6000]]<br><br />
<i>New board:</i><br><br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br><br />
<b>Tuner (tin box)</b><br><br />
[[Alps TDED4]] <i>(both boards)</i><br><br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* AV In<br />
* Remote In<br />
|<br />
* Comes with remote<br />
|[http://www.nebula-electronics.com/images/ProdPCI.jpg]<br />
|}<br />
<br />
=== [[NotOnlyTV]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[NotOnlyTV LV3H|LV3H]]<br />
<br />
[http://www.notonlytv.net/p_lv3h.html]<br />
| 39 €<br />
|<br />
*DVB-T <br />
*Analog (brightness problems)<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23881]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 (Geniatech X8000-MT DVBT)<br><br />
Some options are needed to work properly: <br />
<code>options cx88xx card=81 tuner=71</code><br />
|[http://www.notonlytv.net/img/products/lv3h_01.jpg]<br />
|}<br />
<br />
=== [[NPG]] ===<br />
<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Real DVB-T]] <br>[http://www.npgtech.com]<br />
|<br />
|Doesn't seem to work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23880-19]] CX22702-25<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
* 2.6.16 kernel recognizes the card as "Conexant DVB-T reference design" (card=19)<br />
|<br />
|}<br />
<br />
=== [[Pinnacle]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[PCTV MediaCenter 300i]]<br />
<br />
[http://www.pinnaclesys.com/ProductPage_n.asp?Product_ID=2451&Langue_ID=4]<br />
|ca. 110 €<br />
<br />
(~40 € for "Dazzle" package with no remote)<br />
|DVB works with patches from [http://dl.bytesex.org/patches/], but see this thread [http://www.linuxtv.org/pipermail/linux-dvb/2005-December/007035.html] for recent regression post 2.6.12<br />
Everyone seems happy using Hartmut's Patch [http://www.linuxtv.org/pipermail/linux-dvb/2006-February/008345.html] with more recent kernels. Check the associated thread for more info...<br />
<br />
July 2006: Worked out of the box with recent kernel 2.6.17 Debian unstable!<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br />
[[tda9887]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/ProductImages/Ss_01_MediaCenter300iB_02.jpg]<br />
<br />
[http://www.pinnaclesys.com/images/box/box_128x148_pctvmediacenter300i_bl_4.jpg]<br />
|- valign="top"<br />
|[[PCTV MediaCenter 310i]]<br />
<br />
[http://www.pinnaclesys.com/PublicSite/sp/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+310i.htm]<br />
|ca. 110 €<br />
|DVB works with Debian AMD64 testing<br />
<br />
Worked out of the box with recent kernel 2.6.20<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
[[tda8275A]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
* Quality better than Pinnacle software for win xp.<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[PCTV Dual DVB-T Pro PCI / 2000i]] <br />
<br />
[http://www.pinnaclesys.com/PublicSite/de/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+%28DVB-S_DVB-T%29/PCTV+Dual+DVB-T+Pro+PCI.htm]<br />
|ca. 120 €<br />
|Not working so far (Oct.2006). Shows up as three unknown PCI devices ID 0040, 0041, 0042 with subsystems 0044. Manufacturer ''Pinnacle Systems Inc.'' detected correctly.<br />
|2x [[Zarlink ZL10353]]<br> 2x [[Microtune MT2060]]<br />
[[PINNACLE DTV BRIDGE 0612MP007/0611MP007]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Dual DVB-T tuner card.<br />
* Comes with remote control. Uses Pinnacle's own application, might not be avalable for Linux.<br />
* [http://reactorcore.net/v4l/pctv-2000i High Quality Pictures]<br />
|[http://www.sandbox.de/dvb-t/Pinnacle_Dual_DVB-T_Pro_PCI.jpg]<br />
|}<br />
<br />
=== [[Satelco]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Satelco Easywatch PCI DVB-T]]<br />
<br />
[http://www.satelco.de/htm/shop/popup/intro_dvb_t.htm]<br />
|<br />
ca. 60 €<br />
|<br />
*Not supported yet by present kernel release (2.6.25).<br />
*A [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=251130bf266000fe6e9fdccda50fe4b5c1d6cb24 patch] is on the way. Latest [http://linuxtv.org/hg/v4l-dvb v4l-dvb drivers] should be [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers#Case_2:_Installation_of_LinuxTV_Drivers_Required manually compiled] (this requires kernel 2.6.19 or higher).<br />
*This card is not suitable for [http://knoppmyth.net/knoppmyth.html KnoppMyth R5F27], as the aforementioned workaround may be tricky to apply to the distro's kernel (2.6.18-chw-13).<br />
|<br />
* '''PCI bridge''': [[Philips SAA7146]]<br />
* '''Tuner''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In (top)<br />
* Antenna Out (bottom)<br />
|<br />
Onboard connector to Common Interface extension kit (not included).<br />
|<br />
[http://www.satelco.de/img/produkte/easywatch/easywatch_dvb_t_2.jpg]<br />
[http://www.satelco.de/img/produkte/easywatch/dvbt/thumb/tn_2vorne.jpg]<br />
|}<br />
<br />
=== [[TechniSat]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TechniSat AirStar 2 PCI / Air2PC DVB PCI|AirStar 2 PCI / Air2PC DVB PCI]] [http://www.technisat.de/?site=produkte/produkteview.php&kid=1,29&pid=1352&PHPSESSID=69a82464181e34e44928a4fe4ff4fe6c&reload]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.vdr-portal.de/board/thread.php?sid=&postid=154853][http://www.vdr-portal.de/board/thread.php?postid=163580#post163580]<br />
| <br />
* [[Zarlink]] [[Zarlink MT352|MT352]] <br />
* (autodetect in linux kernel driver also includes: cx24123, cx24113, s5h1420 modules)<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
|<br />
* Remote and LIRC Compatible Serial Dongle Included.<br />
<br />
|[[Image:AirStar_DVB-T_PCI.jpg|thumb|120px]]<br />
|}<br />
<br />
=== [[TechnoTrend]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|-<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1200|TT-DVB-T 1200]]<br />
|ca. 210 €<br />
|DVB, VDR<br><br />
|?<br />
|<br />
* Antenna In<br />
* Video Out<br />
|<br />
* The TT-DVB-T 1200 is the only known "[[Full-featured Card|full-featured]]" DVB-T Card.<br />
* Can only tune UHF channels: '''VHF is not supported with this card!'''<br />
|.<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1500|TT-DVB-T 1500]]<br />
<br />
[http://www.technotrend.com/2783/TT-budget__T-1500.html]<br />
|ca. 79 €<br />
|DVB, VDR<br><br />
|Bridge:[[Philips SAA7146]]<br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046]]<br><br />
|<br />
* Antenna In<br />
* [[Common Interface]] (on board connector). Needs to be bought separately.<br />
|<br />
* Gives wrong frequencies when channelscanning in for example xawtv4 and mythtv for at least one user. As long as the channel frequencies are adjusted afterwards everything works fine. (Hardware: 0000:00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01))<br />
* To make the fine piece of remotecontrol that comes with the budget t 1500 card, add these lines to:<br />
* /etc/modprobe.d/options<br />
* options budget_ci rc5_device=255<br />
* And use it with the [http://linuxtv.org/vdrwiki/index.php/Remote-plugin VDR Remote-plugin]<br />
<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1300|TT-DVB-T 1300]]<br />
<br />
[http://www.technotrend.de/english/products/pcproducts3-1.html] [http://www.technotrend.de/english/products/pcproducts3-2.html]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[TechnoTrend TT-PCline Budget3 TA1000|TT-PCline Budget3 TA1000]]<br />
|ca. 90 €<br />
|?<br />
|?<br />
|<br />
* Antenna In<br />
|<br />
* Combination DVB-T and analog (PAL/NTSC)<br />
|[http://www.dvbshop.net/images/budget3.jpg]<br />
|}<br />
<br />
=== [[TerraTec]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1200_DVB-T|Cinergy 1200 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=224]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Bridge: [[Philips SAA7146]]<br><br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* Video In<br />
| <br />
|<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1400_DVB-T|Cinergy 1400 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=244]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Tuner: Thomson [[TT 7579]]<br><br />
Chipset Connexant CX88XX<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
* Remote In <br />
|<br />
* Use cx88xx with option card=30 (if kernel>=2.6.13) or card=19 (if kernel < 2.6.13) and use drivers:<br />
*cx88_dvb <br />
*cx8802 <br />
*cx8800 <br />
*cx88_blackbird (connexant ref. design)<br />
|[[http://www.sandbox.de/dvb-t/TerraTec_Cinergy_1400_DVB-T_PCI.jpg]]<br />
|- valign="top"<br />
|[[TerraTec Cinergy HT PCI|Cinergy HT PCI]] <br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T, Analog TV, Radio<br />
|<br />
* '''Tuner''': Thomson [[TT 7579]]<br />
* '''Chipset''': Philips [[Philips_SAA7134|SAA7134]]<br />
* '''Analog Tuner''': tda8290+75<br><br />
* '''Digital Chipset''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Works with Module saa7134 for analog TV and saa7134-dvb for DVB-T<br />
* Drivers from linuxtv.org work fine, no special options needed.<br />
* Has remote included, does not work for me in linux so far.<br />
* PCI subsystem ID: 153b:1175<br />
* Note: There is an unsupported newer revision under the same name, see below.<br />
|<br />
|- valign="top"<br />
| style="white-space:nowrap" | New [[Cinergy HT PCI]]<br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T<br />
|Chipset [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Newer revision of TerraTec Cinergy HT PCI<br />
* PCI subsystem ID: 153b:1177<br />
* DVB-T working with at least 2.6.35 vanilla, cx23885 + zl10353<br />
|<br />
|}<br />
<br />
=== [[TwinHan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]] [http://www.twinhan.com]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[Hama]] [[DVB-T PCI-Karte]]<br />
|[http://www.twinhan.com/product_terrestrial_4.asp]<br />
<br />
|- valign="top"<br />
|[[DTV Ter PCI (A&D)]] [http://www.conrad.de/script/twinhan_dtv_ter.sap]<br />
VP-30540<br />
|ca. 70 €<br />
|Works ok with FC4 latest 2.6 kernel and cx88xx option card=42.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Conexant]] [[Conexant CX2388x|CX23883]]<br />
* [[Philips]] FMD1216ME<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
You will see 4 new PCI-Devices:<br />
* 14f1:8800 Conexant CX23880/1/2/3 PCI Video and Audio Decoder<br />
* 14f1:8801 unknown<br />
* 14f1:8802 unknown<br />
* 14f1:8804 unknown<br />
<br />
The non-DVB-T (analog-tuner) evtl. works running<br />
modprobe cx88xx tuner=63<br />
<br />
EDIT: Got DVB-T to work with option card=42:<br />
<br>cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro<br />
<br>Playback is smooth the earlier comment about Jekryness was due<br />
<br>to not have overlay switched on. <br />
<br>The card even looks like the digitalnow DNTV Live! DVB-T Pro [http://www.digitalnow.com.au/product_pages/DNTV_Pro.html]<br />
|[http://www.mcsat.co.uk/catalog/images/ter-D+A.gif]<br />
|- valign="top"<br />
|[[TwinHan 3506 Hybrid|3506 Hybrid]]<br />
<br />
[http://www.twinhan.com/product_D%2BA_3056_1.asp]<br />
<br />
|~ £25 in UK<br />
|Works ok with FC7 latest 2.6 kernel and saa7134 module, card=109.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
I<sup>2</sup>C gate tuning problem, you'll need to compile the driver with a small change<br />
|<br />
|}<br />
<br />
=== Ultraview ===<br />
* [[DViCO_FusionHDTV_DVB-T1|Ultraview DVB-T Plus]]<br />
<br />
=== [[Yuan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Stratford PG300]] <br />
<br />
[http://www.yuan.com.tw/en/products/vdo/vdo_PG300.html]<br />
|AUD $45<br />
|DVB, VDR possible<br><br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]] [[Conexant CX22702|CX22702-15]] <br />
|<br />
* Antenna in<br />
* IR in<br />
* Antenna Loop out<br />
|<br />
* Remote & IR-receiver included<br />
* DVB Works with "options cx88xx card=43"<br />
* Remote '''Not''' Working<br />
* Includes Low-Profile bracket<br />
|<br />
[http://www.gamedude.com.au/yuan]<br />
|<br />
<br />
|-<br />
| [[Yuan MPC 788 Hybrid Mini-PCI]]<br />
<br />
[http://www.yuan.com.tw/jp/products/tuner/productscontent3.htm]<br />
| $25USD<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive xc3028<br />
* Demod: ZL10353<br />
* Demux: CX23883<br />
|<br />
* Antenna In<br />
<br />
|<br />
* Remote and external antenna included.<br />
* Same components as Winfast DTV1800 card.<br />
* Analog works with "options cx88xx card=81" in "/etc/modprobe.d/video4linux"<br />
* Tested analog with MPlayer.<br />
* Basic testing with Kaffeine. Kaffeine detected the card and scanned for channels, however testing was done in Canada where no DVB-T signal exist.<br />
|<br />
<br />
|}<br />
<br />
== Currently Unsupported DVB-T PCI cards==<br />
{{help to support}}<br />
<br><br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br><br />
<br>Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures''<br />
|- valign="top"<br />
|'''[[Pinnacle]]<br><br />
[[Pinnacle PCTV DVB-T PCI (250i)|PCTV DVB-T PCI (250i)]]''' [http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+(DVB-S_DVB-T)/PCTV+DVB-T+PCI+(250i).htm]<br><br />
<br><br />
~£26 in the UK<br />
|No support yet<br />
|<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/screenshots/PCTV_DVB-T_PCI_persp_midres.jpg]<br />
<br />
|- valign="top"<br />
|'''[[Leadtek]]<br><br />
[[Leadtek WinFast DTV2000DS PLUS|Winfast DTV2000DS PLUS]]''' [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=overview]<br><br />
<br><br />
~$65 AUD<br />
|DVB<br />
|<br />
* Chipset: [[RealTek RTL2832U]]<br />
* Tuner??<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card.<br />
* Uses VIA onboard PCI-USB bridge and appears as a USB device (ID 0413:6f12)<br />
* Comes with remote control.<br />
* Can be made to work with Xubuntu 12.04 kernel 3.2 - see card page for details.<br />
|<br />
<br />
|- valign="top"<br />
|'''[[X3M digital S.A. | X3M tv-tuners]]<br><br />
[[x3m digital S.A HPC2000|HPC2000]]'''<br>EUR ~45 (Euro)<br />
|No support yet<br><br />
|<br />
*Chipset: Conexant CX23880<br />
*Multiplexer-Demultiplexer: hcf4052<br />
*Demodulator: ZL10353/WJCE6353 <br />
*Tuner: xc3028 (Xceive)<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
* Supports MPEG-2 and MPEG-4(H264)<br />
* it seems to be a [http://www.geniatech.com/dwonloadf/d_dvbt.htm Geniatech DVB-T TV Hybrid X8000MT]; windows drivers of both cards are the same.<br />
* an open source linux driver, seemingly based on an older checkout of the V4L HG tree, can be found at [http://www.geniatech.com/driver-eng/linux/v4l-dvb-experimental-x8000mt.tar.gz]<br />
* the firmware, which the 2.6.31-rc1 kernel tuner driver does not seem to have a loader for, is located at [http://www.geniatech.com/driver-eng/linux/fw25_linux.tar.gz]<br />
* this geniatech firmware is identical with the X3M firmware provided here[http://www.x3mtv-tuners.de/uploads/media/HPC2000_x86_Linux_Treiber.zip] This supports the notion that those cards are in fact identical<br />
* the xc3028-v27.fw firmware extracted from other Xceive tuner based cards' windows drivers via extract_xc3028.pl does not seem to work on this card<br />
* from skimming the source code of the xc3028 driver(kernel and geniatech) it seems to me that the xc3028-v27.fw firmware is simply a binary compound of the same components(though the length of the chunks seems to differ) that are provided in the geniatech firmware.<br />
|<br />
[[Image:Hpc2000.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|'''[[Compro Technology | Compro]]<br><br />
[[Compro VideoMate DVB-T220|VideoMate DVB-T220]]'''<br />
|No support yet<br><br />
Detects as a T200<br />
|<br />
*Chipset: SAA7130<br />
*COFDM Demodulator: MT352<br />
*Tuner: [[Quantek QT1010]]<br />
|<br />
*Antenna In<br />
*S-Video in<br />
*Remote In<br />
|<br />
* DVB-T Card<br />
* Comes with remote control.<br />
|<br />
[[Image:VideoMate_DVB-T220.JPG|thumb|120px|]]<br />
|}<br />
<br />
<br />
[[Category:DVB-T| ]]<br />
[[Category:DVB-T PCI Cards| ]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=DVB-T_PCI_cards&diff=31673DVB-T PCI cards2013-02-05T11:25:51Z<p>Michaelp: /* Currently Unsupported DVB-T PCI cards */</p>
<hr />
<div>On this page you will find information regarding [[DVB-T]] [[PCI]] cards.<br />
<br />
{{non-exhaustive list}}<br />
<br><br />
==Supported DVB-T PCI Cards==<br />
The following table lists the confirmed working DVB-T PCI cards and provides a brief summary of their features and components. If you need more technical information on a device, have a look at its specific wiki article. <br />
<br />
=== [[ASUS]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Type'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[ASUS My Cinema-P7131 Hybrid|My Cinema-P7131 Dual]]<br />
<br />
[[Image:ASUS-MyCinema-P7131-Dual-box.jpg|thumb|120px]]<br />
|DVB-T + Analog [http://uk.asus.com/products.aspx?l1=18&l2=83&l3=252&l4=0&model=547&modelmenu=1]<br />
|ca. 45 €<br />
|DVB, VDR<br />
| <br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* DVB-T/FM in<br />
* Analog TV in<br />
* IR in<br />
* AV in (with cable to composite, S-video and audio)<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* With Low-Profile bracket<br />
* Supports FM-radio<br />
* Needs firmware (dvb-fe-tda10046.fw); see the [[ASUS My Cinema-P7131 Hybrid|P7131 article]]<br />
- Following the above article works under Ubuntu 7.10 (Gutsy Gibbon) using Kaffeine 0.8.5 (running the Xine Player Engine ewith the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package)<br />
|[http://www.bttv-gallery.de/HPIM2609.JPG_asus_tiger_302_a.jpg]<br />
[[Image:ASUS-MyCinema-P7131-Dual.jpg|thumb|50px]]<br />
[[Image:ASUS-MyCinema-P7131-Dual-rear.jpg|thumb|50px]]<br />
|}<br />
<br />
=== [[AVerMedia]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T (A761) | AVerTV DVB-T (A761)]]<br />
<br />
<strike>[http://www.avermedia.de/Products/TV_Tuner/DVB-T/main.htm]</strike><br />
<br />
oldest AVerTV DVB-T model<br />
|ca. 90 €<br />
|DVB, VDR<br />
<br />
[http://www.vaslet.de]<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
* S-Video in<br />
* Composite in<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* Low-Profile-Card<br />
* Difference compared to 771 is the Tuner and Composite-in<br />
|<strike>[http://www.avermedia.de/Products/images/Products/DVB-T_FB.jpg]</strike><br />
[http://www.vaslet.de/content/dvbt/averdvb_a761_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_761.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 771 (A771) | AVerTV DVB-T 771 (A771)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt771.asp?show=1]<br />
|ca. 90 €<br />
|DVB, VDR possible<br />
<br />
[http://www.gossamer-threads.com/lists/mythtv/users/72584] [http://www.frokaschwei.net/avtv771/avermedia.html], [http://www.mail-archive.com/linux-dvb@linuxtv.org/msg17579.html] [http://www.vaslet.de]<br />
<br />
Warning some people experience problems with this card search for mt352_read_register on the mailing list.<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-rerceiver included<br />
* Low-Profile-Card<br />
* Difference to the older "761" is the Tuner and the missing Composite-in<br />
|<strike>[http://www.avermedia.de/Products/TV_Tuner/dvbt771/771.jpg]</strike> [http://www.vaslet.de/content/dvbt/averdvb_a771_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_771.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16AR) | AVerTV DVB-T 777 (A16AR)]]<br />
<br />
newest model of the AVerTV DVB-T<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. 65 €<br />
|DVB, VDR ab 2.6.17-rc1<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-receiver included (v4l-dvb needs a patch to properly work)<br />
* Works on Ubuntu 6.10 "almost" out of the box.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:Avermedia777.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16A-C)| AVerTV DVB-T 777 (A16A-C)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. ? €<br />
|DVB<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Tested on 32bit Fedora 9.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:AVER777A16A-C_front.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV Hybrid+FM PCI (A16D)| AVerTV Hybrid+FM PCI (A16D)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI(A16D).asp?show=1#]<br />
|ca. 80 €<br />
| Analogue, kernel 2.6.26; <br />
DVB-T, kernel 2.6.27<br />
<br />
For DVB and experimental support, see [http://mcentral.de/wiki/index.php5/AVerMedia_AverTV_Hybrid_FM_PCI_A16D here], and maybe [http://mcentral.de/wiki/index.php5/AverMedia_Cardbus_Hybrid_TV_FM_E506R here]<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Xceive]] [[Xceive XC3018|XC3018]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|[http://www.avermedia.com/docs/productimage/AVerTV-Hybrid+FM-PCI-b.jpg]<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[AVerMedia AVerTV Hybrid+FM PCI (A16AR)| AVerTV Hybrid+FM PCI (A16AR)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI.asp?show=1]<br />
|<br />
| Yes<br />
FM radio not supported<br />
|<br />
* Philips TD1316A (tuner)<br />
* Philips TDA9887 (analog demodulator)<br />
* Philips SAA7135HL (A/V decoder)<br />
* Zarlink MT352 (DVB-T demodulator)<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|<br />
<br />
|- valign="top"<br />
|[[AVerMedia_AVerTV_DVB-T_Super_007 | AVerTV DVB-T Super 007]]<br />
<br />
[http://www.avermedia.com/EN/Default.aspx?TYPE=vipplayercard.htm&PT=product&tv_TCAT_POS=0&PID=4710710671877]<br />
|ca. 60 €<br />
| Yes (with [http://lists.zerezo.com/video4linux/msg19205.html patch])<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* DVB-T / Analog<br />
* Remote and Infra-red-receiver included<br />
* (this is "Hybrid Super 007" with Analog+DVB-T or "DVB-T Super 007" with only DVB-T?)<br />
|<br />
[[Image:Super_007_box.jpg|thumb|50px|]]<br />
[[Image:Super_007_card.jpg|thumb|50px|]]<br />
|<br />
<br />
*<br />
* DVB-T DUAL LV32TDLX<br />
|}<br />
<br />
=== [[ChainTech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[DTT 1000 PCI]]<br />
<br />
<strike>[http://www.chaintech.com.tw/tw/eng/product_spec.asp?MPSNo=15&PISNo=170]</strike><br />
|ca. 100 €<br />
|DVB, VDR<br> (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Hangs at least older kernels (<2.6.12) unless the bttv module is loaded with parameters "i2c_hw=1 card=0x71". This may cause boot problems when the module is automatically loaded by hotplug.<br />
|<strike>[http://www.chaintech.com.tw/tw/images/Products/DMPD/DTT1000_L.jpg]</strike><br />
|}<br />
<br />
=== [[Club 3D]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[ZAP-TV2202]]<br />
<br />
[http://www.club3d.nl/index.php/products/zaptv/item/11]<br />
<br />
[http://www.club3d.nl/support/manuals/zap-tv/2202/ZAPTV2202_QuickGuide.pdf Manual]<br />
|ca. 67 €<br />
|DVB, Analogue<br />
| Philips [[Philips SAA7131|SAA7131]]<br />
|<br />
* Antenna In<br><br />
* Radio In<br><br />
* S-Video In In<br><br />
|<br />
* Shows up as device 169d:3306<br />
* Installed with command modprobe saa7134 card=94<br />
|<br />
|}<br />
<br />
=== [[Compro Technology|Compro]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[Compro VideoMate T200|VideoMate DVB-T200]]<br />
[http://www.comprousa.com/New/en/product/vmt200.html]<br />
|ca. 37 €<br />
|DVB kernel 2.6.17<br />
| Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br><br />
* S-Video In<br><br />
* Composite In<br><br />
|<br />
* Remote and Infra-red-receiver included <br />
(to get the irda working correctly you may find this mail useful [http://marc.theaimsgroup.com/?l=linux-video&m=113672404400380&w=2] )<br />
* HDTV *(1080i / 720P) ready<br />
* Power on via irda<br />
* warning: problems with poor reception: [http://cvs.mythtv.org/trac/ticket/2664]<br />
|<br />
|}<br />
<br />
=== [[DViCO]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[FusionHDTV Dual Digital 4]]<br />
<br />
[http://www.fusionhdtv.co.kr/ENG/products/DVBTdual4.aspx]<br />
|<br />
* DVB, VDR<br />
* <strike>works with [http://fremnet.net/article/228/dvico-fusionhdtv-dual-digital-4-under-linux patches] - (non Australian users should ignore the dd4.au.patch patch and not use the xc3028.au2.fw firmware).</strike> See https://help.ubuntu.com/community/DViCO_Dual_Digital_4<br />
Revision 2 of this card has just been released ([http://mandmservices.com.au/dvico image]). The new card uses a DIBCOM tuner and modulator <strike>and does not work under the current driver.</strike><br />
<br><br />
The linuxTV drivers are now updated, the revision two works beautifully. The changes do not yet seem to be merged with the Linux kernel (2.6.27), the link above should help you install the drivers. The Rev 2 card may not work properly with older kernels such as 2.6.22 (AMD 780G chipsets, USB disconnects), even using the latest linuxTV drivers. The following link also has some useful information: http://ubuntuforums.org/showthread.php?t=616103 <br />
|Rev 1- Zarlink ZL10353<br />
Rev 2- Dibcom 7070pb1 tuner, CY7C68013A USB peripheral controller, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna in<br />
* IR In<br />
|<br />
* Dual DVB-T tuner card<br />
* Supports HD streams<br />
* <strike>Requires patching</strike><br />
* Is actually two USB devices attached though a Via PCI-to-USB bridge<br />
* Uses <tt>dvb-usb-cxusb</tt> module<br />
* Rev 2 uses <tt>dib0070, dib7000p, dib7000m, dib3000mc, dibx000_common</tt> modules<br />
* Includes low-profile PCI bracket<br />
|<br />
[[Image:DViCO_FusionHDTV_Dual_Digital_4.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|<br />
FusionHDTV Dual Digital 2<br />
|<br />
* DVB-T<br />
| <br />
* CX23880<br />
|<br />
* Antenna In<br />
* IR In<br />
* S-Video In<br />
* USB Type-B connector<br />
|<br />
* Dual PCI/USB device - has a loopback cable<br />
* Works out of the box in Ubuntu 10.04 (and earlier versions)<br />
* Low-Profile<br />
|<br />
(No Picture)<br />
|}<br />
<br />
* [[DViCO FusionHDTV DVB-T1]]<br />
* [[DViCO FusionHDTV DVB-T Lite]]<br />
<br><br />
<br />
=== [[GDI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[GDI Black Gold]]<br />
<br />
[http://www.blackgold.tv/products/digital.htm]<br />
|<br />
|S-Video support works (Small patch which is now in CVS). DVB doesn't work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]]/Front End CX22702/Tuner Philips TU1216/[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]] demodulator<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
|Like this, but slightly longer with a heat sink. <br><br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_Plan.jpg Card]<br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_End.jpg Connectors]<br />
|}<br />
<br />
=== [[Geniatech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech X8000-MT|X8000-MT]]<br />
<br />
[http://www.geniatech.com/pa/x8000t.asp]<br />
| 45 €<br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23883]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 <br><br />
Identical board to [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[[Image:X8000T-DVBT-PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Hama]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[DVB-T PCI-Karte]]<br />
<br />
<strike>[http://www.hama.de/portal/articleId*110877/action*2563/searchMode*1/bySearch*dvb-t]</strike><br />
|ca. 80 €<br />
|DVB, VDR possible<br><br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|[[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[TwinHan]] [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]]<br />
|[http://www.hama.de/bilder/00049/abb/00049019abb.jpg]<br />
|}<br />
<br />
=== [[Hauppauge]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|Old [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(until 06/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* '''Since 07/2004 Hauppauge have been shipping a new Nova-T (see below)'''<br />
* Comes with remote<br />
[[Image:Hauppauge_nova-t_remote.jpg|thumb|30px|]]<br />
|[[Image:Hauppauge_nova-t_old.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|New [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(since 07/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|ca. 100 €<br />
|Works with patches from [http://dl.bytesex.org/patches/] or >= kernel 2.6.12<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* Remote In<br />
|<br />
* Drivers included in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* Comes with same remote as the older model<br />
|[http://sulu.sohanet.de/tmp/]<br />
[[Image:Hauppauge_nova-t_juli2004.jpg|thumb|50px|]]<br />
[[Image:Hauppauge_nova-t_juli2004_Packung.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge WinTV-NOVA-T-500|WinTV-NOVA-T-500]]<br />
<br />
(since 09/2006) [http://www.hauppauge.co.uk/pages/products/data_novat500.html]<br />
|ca. 100 €<br />
|works with v4l-dvb hg from 2006-09-20 [http://www.linuxtv.org/repo/] or kernel >= 2.6.19 - <br />
|[[DiBcom]] [[DiBcom DiB7xxx|DiB0700]]<br />
|<br />
* Antenna In<br />
* Remote In (should now be working)<br />
|<br />
*Dual DVB-T tuner card.<br />
*As of 28/08/2008, according to Michael Krufky, all currently released versions, including the Diversity model, are supported by head of v4l-dvb hg, and the driver is likely to stay ahead of new card releases in the future.<br />
*PCI 2.2 card using 3.3V. Failed to run on PCI 2.1 system.<br />
|<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1300|WinTV-HVR-1300]] (since 07/2005)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1300.html]<br />
(HVR-1100 is similiar to HVR-1300, but without MPEG hardware encoder)<br />
|ca. 130 €<br />
|Digital & Analogue working in repository [http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=3e90edbf7c53584f109fe091d7380e8bda9fa282;style=gitweb]. Encoder support being worked on.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* DVB support in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* This card has tuning problems in MythTV and Kaffeine (works with tzap). See the card page.<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|[http://sulu.sohanet.de/tmp/][[Image:100 7999.JPG|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1110|WinTV-HVR-1110]] (since 09/2006)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1110 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10046 chipset)<br />
|ca. 70 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported with the latest 2.6.18 kernel, need latest v4l-dvb (mercurial) to work on older kernels. See [http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_Mercurial].<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1120|WinTV-HVR-1120]] (since 05/2009)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1120 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10048 chipset)<br />
|ca. 50 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported since kernel 2.6.31. <br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-3000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr3000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hvr3000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hvr3000.jpg|thumb|50px|]]<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-4000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr4000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, DVB-S2 and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|50px|]]<br />
<br />
|}<br />
=== [[Jactek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech JH-600|JH-600]]<br />
<br />
[http://www.jactek.com.tw/product_pctv/product_jh600.html]<br />
| <br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-2388x]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Identical board to [[Geniatech X8000-MT|X8000-MT]], [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[http://www.jactek.com.tw/product_pctv/images/product_jh600_34.jpg]<br />
|}<br />
<br />
=== [[KNC1]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[KNC1 TV-Station DVB-T | TV-Station DVB-T]] <br />
<br />
[http://www.kncone.de/d/produkte/digital_dvb_t.htm]<br />
<br />
|ca. 80 €<br />
|DVB, ? <br />
|Philips [[Philips SAA7146|SAA7146]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* [[Common Interface]]<br />
| <br />
|<br />
|}<br />
<br />
=== [[KWorld]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[KWorld_V-Stream_Xpert_DVB-T_PCI|V-Stream Xpert DVB-T PCI]] <br />
<br />
[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.html]<br />
|ca. 80 €<br />
|DVB, VDR possible [http:///www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00716.html] New card:[http://www.manenti.org/blog/archives/000089.html]<br />
Full support :[[http://linuxtv.org/wiki/index.php/KWorld_V-Stream_Xpert_DVB-T_%28tuner_THOMSON_DTT_7579%29]]<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite In<br />
* Remote In<br />
|<br />
* Remote & IR-receiver included<br />
* There are three versions of this card, one with a Samsung tuner similar to the AVerMedia 771, another with a Thomson tuner (similar to the Nova-T 90002) and another with Thomson tuner DTT 7579. All versions are supported. <br />
|[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.jpg]<br />
|- valign="top"<br />
|[[KWorld DVB-T 220 | DVB-T 220]]<br />
<br />
[http://www.kworld.com.tw/en/kworld/body/Products/D+A/DVB-T220.htm]<br />
|<br />
|DVB, analogue<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In (two)<br />
* FM In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe saa7134-dvb' to enable DVB.<br />
| <br />
[[Image:kworld_DVB-T220.jpg|thumb|120px]]<br />
<br />
|- valign="top"<br />
|[[KWorld_DVBT-100 | DVBT-100]]<br />
<br />
[http://www.kworld.com.tw/en/index_digital.htm]<br />
|<br />
|DVB, analogue<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite video In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe cx88-dvb' to enable DVB. Suspected same card as KWorld_V-Stream_Xpert_DVB-T_PCI. <br />
|<br />
<br />
|- valign="top"<br />
|[[KWorld DVB-T PC160-2T | DVB-T PC160-2T ]]<br />
<br />
[http://www.kworld.com.tw/product_overview.aspx?P_ID=215]<br />
|<br />
| '''NOTE: This card is IDENTICAL to Leadtek DTV2000DS, except for the USB ID, the remote, and the sticky label on the tuners!'''<br />
So please refer to DTV2000DS for extra info.<br />
Dual DVB-T tuners, also known as PEAK DVB-T Dual tuner PCI (221544AGPK)<br />
Working as single tuner card (at least) on 2008-06-05<br />
http://linuxtv.org/hg/~anttip/af9015-mxl500x-copy-fw/<br />
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files<br />
Ref http://marc.info/?l=linux-dvb&m=121268349100641&w=2<br />
A single tuner variant (PC-160-T) is now also supported.<br />
|[[Afatech AF9015|AF9015]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Note that curent kernel versions do not have a keymap for the provided remote, see here for some info about setting up a custom keymap: http://francisfisher.me.uk/problem/2012/kworld-pc160-2t-remote-control-on-ubuntu-linux-11-10-2/<br />
* From my experience, the latest driver (23/03/12) has some bugs that require daily hard resets of the device.<br />
* KWorld support are not interested in providing any assistance getting the device working: "Sorry,we can't help you to solve the remote problem in Linux,since we don't highlight/mention that it can support this system. If you have the problem in Windows system,we are willing to help you solve it."<br />
| <br />
[[Image:Kworld pc160.jpg|thumb|120px]]<br />
<br />
<br />
|}<br />
<br />
=== [[Leadtek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 S|WinFast DTV1000 S]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=382&check=f]<br />
|<br />
| DVB<br />
| [[Chipset NXP 18271 + 10048 + 7130]]<br />
|<br />
* TV Antenna In<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Drivers will be included in 2.6.33 Kernel. Meanwhile can be downloaded http://kernellabs.com/hg/~mkrufky/dtv1000s<br />
* The tuner works with Mythbuntu 9.10 as does remote.<br />
| <br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 T|WinFast DTV1000 T]]<br />
[http://www.leadtek.com.tw/eng/tv_tuner/overview.asp?lineid=6&pronameid=220]<br />
|<br />
| DVB<br />
| [[Conexant Systems, Inc.|Conexant]] based system see [[LR6650]]<br />
|<br />
* TV Antenna In<br />
* TV antenna out (loop through)<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Since kernel 2.6.15-rc1<br />
* The tuner works with Mythbuntu 7.10 (i386) but the remote doesn't.<br />
* In Australia, this card appears to have been superseded by the DTV 1000 S which uses a different chipset and apparently is not supported.<br />
| [http://www.leadtek.com.tw/eng/tv_tuner/image/winfast_dvt1000t_2.jpg]<br />
<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H]]<br />
| $AUD 80<br />
| DVB<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 6-pin for video in<br />
|<br />
* DVB-T works with Ubuntu 7.10 (i386), Kaffeine 0.8.5 and the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package<br />
* FM tuner is not found, no radio function<br />
|<br />
<br />
|-<br />
| [[Leadtek WinFast DTV1800 H|WinFast DTV1800 H]]<br />
| $AUD 75<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 (on latest cards on sale in Aus), earlier cards had Xceive xc3028<br />
* Demod:ZL10353<br />
* Demux:CX23883<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
* Comes with remote control<br />
|<br />
* Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html]. Tested with Kaffeine and Australian DVB-T Broadcasts.<br />
* IRC works but default key mapping is incorrect with KDE4 - needs work.<br />
|[http://dev.gentoo.org/~dragonheart/winfast/_MG_1893.JPG]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000DS|WinFast DTV2000DS]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530]<br />
| $AUD 65<br />
| DVB-T<br />
|<br />
* '''Tuner''': '''NXP TDA18211, but detected as TDA18271 by V4L drivers'''<br />
* '''Chipset''': AF9015 + AF9013<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x ph jack for IR sensor<br />
|<br />
* Dual DVB-T tuner card<br />
'''* Read the page regarding the working status of this card.'''<br />
* Supports HD streams<br />
* Is actually two USB devices attached though a VIA VT6210L PCI-to-USB bridge<br />
* Uses dvb_usb_af9015 and af9013 modules<br />
* Includes low-profile PCI bracket<br />
* Includes remote and Infra-Red sensor<br />
* Warning: The DTV2000DS '''PLUS''' is a completely different card and is unsupported. <br />
| [[Image:Leadtek dtv 2000ds 2s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|50px]]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H rev J]]<br />
| $AUD 75<br />
| DVB Analog Hybrid<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX23881|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* 1 x 4 pin audio output connector (internal CD audio type)<br />
|<br />
* Random success with analog OR DVB-T video no sound<br />
* See: [http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H]:<br />
* Add "cx88-dvb" to /etc/modules<br />
* Add "options cx88xx card=51" to /etc/modprobe.d/options<br />
* Add "options cx88xx card=51,51" to /etc/modprobe.d/options if using two cards<br />
* Try adding "options cx88-alsa index=1,2" to /etc/modprobe.d/options and use /dev/dsp in MythTV Frontend if having sound issues in MythTV<br />
* DTV + audio worked out of box in Mythbuntu 8.10 and Ubuntu 8.10. <br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H Plus|WinFast DTV2000 H Plus]]<br />
| $AUD 100<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 on older cards (eg 107d:6f42), Xceive XC3028 on newer cards (eg 107d:6f44)<br />
* Demod:ZL10353<br />
* Demux:CX2388x<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* Comes with remote control<br />
|<br />
* 107d:6f42: Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html].<br />
* 107d:6f44: DVB-T works with "options cx88xx card=81" (using the vanilla v4l) in /etc/modprobe.d/video4linux but none of the other inputs work. Analog works with "options cx88xx card=51" but DVB-T doesn't, even when tuner=71 is specified.<br />
|<br />
<br />
|}<br />
<br />
=== [[LifeView]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T|FlyDVB-T]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt.htm]<br />
|<br />
|DVB-T only<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Composite in<br />
* Remote In<br />
|<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR301.jpg|thumb|85px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Duo|FlyDVB-T Duo]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_duo.htm]<br />
|<br />
|DVB-T and Analog<br />
|Philips [[SAA7133]]<br />
|<br />
* Cable/Antenna In (two)<br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR306.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|[[LifeView FlyDVB Trio| FlyDVB Trio]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvb_trio.htm]<br />
|<br />
|DVB-T, Satellite and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Satellite Antenna In<br />
* Digital Antenna In<br />
* Analog Antenna In<br />
* S-Video/Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:photo_dvb_trio.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Hybrid|FlyDVB-T Hybrid]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_hybrid.htm]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
|<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[LifeView FlyDVB-T Hybrid MCE PRO|FlyDVB-T Hybrid MCE PRO]]<br />
|<br />
|DVB-T and Analog HW encoder<br />
|<br />
* Philips [[SAA7131]] <br />
* Vixs encoder<br />
|<br />
* Cable/Antenna In <br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Hybrid analog/digital HW encoder card<br />
* Supported by Linux kernel 2.6.15<br />
|[[Image:323.jpg|thumb|120px|]]<br />
|}<br />
<br />
=== [[Lorenzen]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[SL DVB-T PCI]] <br />
<br />
<strike>[http://www.lorenzen.de/produkte/cgi-bin/iboshop.cgi?showd60!,3709831960,3930]</strike><br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
* Can support +5V power supply for Antenna (Jumper on board)<br />
| <strike>(Old Design): [http://www.lorenzen.de/produkte/bilder/3922%20200.jpg]</strike><br />
[[Image:Lorenzen_SL_DVB-T_PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Medion]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Medion CTX953 | CTX953]] <br />
<br />
(a.k.a Creatix CTX 953: [http://www.creatix.de/produkte/multimedia/ctx953.htm])<br />
|<br />
| DVB-T tested and works with 2.6.29, analog is untested by me. I suspect it works, too.<br />
|<br />
* NXP SAA 7131E/03/G<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
* NXP 8275AC1<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Audio-In (3.5mm)<br />
* Composite-In<br />
|<br />
* ml-thread: [http://article.gmane.org/gmane.comp.video.video4linux/34255]<br />
|<br />
[[Image:Medion_CTX953_front.jpg|thumb|150px|]]<br />
[[Image:Medion_CTX953_back.jpg|thumb|150px|]]<br />
<br />
|- valign="top"<br />
|<br />
Philips TV/Radio Card CTX918, (Medion 7134), PCI<br />
<br />
|~6€, Ebay Germany<br />
|DVB-T working, FM apparently too ([http://linuxtv.org/v4lwiki/index.php/Generic_SAA7134_Card_Installation Instructions])<br />
|<br />
<br />
* FMD1216ME<br />
* Philips SAA7134HL<br />
* SV92PL<br />
* CSP1034S<br />
<br />
|<br />
* Antenna In<br />
* FM In<br />
|<br />
[http://www.creatix.de/support/download/gruppe6/CTX918_spec.pdf Spec]<br />
[http://www.creatix.de/support/typ.php?tid=62&gid=6 Link to OEM]<br />
|<br />
[[Image:7134.jpg|thumb|150px|]]<br />
|}<br />
<br />
=== [[MSI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D|TV@nywhere A/D]]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
* clone of LifeView FlyDVB-T Hybrid<br />
* requires "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1]] <br />
|Around $65 AUD<br />
|'''Unsupported'''<br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* As of kernel 2.6.23.13 the frontend seems to not work, even with "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1 alternate]] <br />
|Around $65 AUD<br />
|Analog and DVB-T (partially)<br />
|<br />
*Philips [[SAA7131E]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
*Tuner 8275AC1<br />
|<br />
* FM Antenna in<br />
* TV Antenna in<br />
* AV input (comes with adaptor that allows connection of s-video or composite video as well as RCA connectors for audio) <br />
* IR-Remote<br />
|<br />
* This card mostly works with the latest drivers as of 2008-02-08 (tested using mythbuntu 2.6.22-14-generic kernel). There is a problem with unreliable firmware loading. The card only works if the firmware loads correctly.<br />
* Requires card=109<br />
|<br />
[[Image:MSI TV@nywhere A-D v1.1.JPG|thumb|120px]]<br />
|}<br />
<br />
<br />
=== [[Mygica]] ===<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Mygica T1800B|T1800B]]<br />
| 70 AUD<br />
|Dual DVB-T, DAB+ (untested), Remote Control (untested), <br />
|RTL2832U<br />
|<br />
* Antenna In<br />
* AV In<br />
|Requires out-of-tree drivers (see documentation)<br />
|[http://www.auspcmarket.com.au/info/EL-MY-T1800B/]<br />
|- valign="top"<br />
|[[Mygica T188|T188]]<br />
| 30 AUD<br />
|Single DVB-T, DAB+ (untested), Remote Control (untested)<br />
|RTL2832U, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* Uses same (out-of-tree) drivers as the T1800B.<br />
* Driver appears to have bug which prevents getting a signal lock if more than one of these cards are present.<br />
|[http://i49.tinypic.com/68rfon.jpg]<br />
|}<br />
<br />
=== [[Nebula]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Nebula DigiTV PCI|DigiTV PCI]]<br />
<br />
[http://www.nebula-electronics.com/information/info.asp?Code=0001]<br />
|ca. 150 €<br />
|DVB,VDR<br> NXT6000 demod supported by recent kernels, mt352 demod will be supported by kernels >= 2.6.14-rc1.<br />
|<b>Demod Chip</b><br><br />
<i>Old board:</i><br> <br />
[[ATI NXT6000]]<br><br />
<i>New board:</i><br><br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br><br />
<b>Tuner (tin box)</b><br><br />
[[Alps TDED4]] <i>(both boards)</i><br><br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* AV In<br />
* Remote In<br />
|<br />
* Comes with remote<br />
|[http://www.nebula-electronics.com/images/ProdPCI.jpg]<br />
|}<br />
<br />
=== [[NotOnlyTV]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[NotOnlyTV LV3H|LV3H]]<br />
<br />
[http://www.notonlytv.net/p_lv3h.html]<br />
| 39 €<br />
|<br />
*DVB-T <br />
*Analog (brightness problems)<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23881]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 (Geniatech X8000-MT DVBT)<br><br />
Some options are needed to work properly: <br />
<code>options cx88xx card=81 tuner=71</code><br />
|[http://www.notonlytv.net/img/products/lv3h_01.jpg]<br />
|}<br />
<br />
=== [[NPG]] ===<br />
<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Real DVB-T]] <br>[http://www.npgtech.com]<br />
|<br />
|Doesn't seem to work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23880-19]] CX22702-25<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
* 2.6.16 kernel recognizes the card as "Conexant DVB-T reference design" (card=19)<br />
|<br />
|}<br />
<br />
=== [[Pinnacle]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[PCTV MediaCenter 300i]]<br />
<br />
[http://www.pinnaclesys.com/ProductPage_n.asp?Product_ID=2451&Langue_ID=4]<br />
|ca. 110 €<br />
<br />
(~40 € for "Dazzle" package with no remote)<br />
|DVB works with patches from [http://dl.bytesex.org/patches/], but see this thread [http://www.linuxtv.org/pipermail/linux-dvb/2005-December/007035.html] for recent regression post 2.6.12<br />
Everyone seems happy using Hartmut's Patch [http://www.linuxtv.org/pipermail/linux-dvb/2006-February/008345.html] with more recent kernels. Check the associated thread for more info...<br />
<br />
July 2006: Worked out of the box with recent kernel 2.6.17 Debian unstable!<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br />
[[tda9887]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/ProductImages/Ss_01_MediaCenter300iB_02.jpg]<br />
<br />
[http://www.pinnaclesys.com/images/box/box_128x148_pctvmediacenter300i_bl_4.jpg]<br />
|- valign="top"<br />
|[[PCTV MediaCenter 310i]]<br />
<br />
[http://www.pinnaclesys.com/PublicSite/sp/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+310i.htm]<br />
|ca. 110 €<br />
|DVB works with Debian AMD64 testing<br />
<br />
Worked out of the box with recent kernel 2.6.20<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
[[tda8275A]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
* Quality better than Pinnacle software for win xp.<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[PCTV Dual DVB-T Pro PCI / 2000i]] <br />
<br />
[http://www.pinnaclesys.com/PublicSite/de/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+%28DVB-S_DVB-T%29/PCTV+Dual+DVB-T+Pro+PCI.htm]<br />
|ca. 120 €<br />
|Not working so far (Oct.2006). Shows up as three unknown PCI devices ID 0040, 0041, 0042 with subsystems 0044. Manufacturer ''Pinnacle Systems Inc.'' detected correctly.<br />
|2x [[Zarlink ZL10353]]<br> 2x [[Microtune MT2060]]<br />
[[PINNACLE DTV BRIDGE 0612MP007/0611MP007]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Dual DVB-T tuner card.<br />
* Comes with remote control. Uses Pinnacle's own application, might not be avalable for Linux.<br />
* [http://reactorcore.net/v4l/pctv-2000i High Quality Pictures]<br />
|[http://www.sandbox.de/dvb-t/Pinnacle_Dual_DVB-T_Pro_PCI.jpg]<br />
|}<br />
<br />
=== [[Satelco]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Satelco Easywatch PCI DVB-T]]<br />
<br />
[http://www.satelco.de/htm/shop/popup/intro_dvb_t.htm]<br />
|<br />
ca. 60 €<br />
|<br />
*Not supported yet by present kernel release (2.6.25).<br />
*A [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=251130bf266000fe6e9fdccda50fe4b5c1d6cb24 patch] is on the way. Latest [http://linuxtv.org/hg/v4l-dvb v4l-dvb drivers] should be [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers#Case_2:_Installation_of_LinuxTV_Drivers_Required manually compiled] (this requires kernel 2.6.19 or higher).<br />
*This card is not suitable for [http://knoppmyth.net/knoppmyth.html KnoppMyth R5F27], as the aforementioned workaround may be tricky to apply to the distro's kernel (2.6.18-chw-13).<br />
|<br />
* '''PCI bridge''': [[Philips SAA7146]]<br />
* '''Tuner''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In (top)<br />
* Antenna Out (bottom)<br />
|<br />
Onboard connector to Common Interface extension kit (not included).<br />
|<br />
[http://www.satelco.de/img/produkte/easywatch/easywatch_dvb_t_2.jpg]<br />
[http://www.satelco.de/img/produkte/easywatch/dvbt/thumb/tn_2vorne.jpg]<br />
|}<br />
<br />
=== [[TechniSat]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TechniSat AirStar 2 PCI / Air2PC DVB PCI|AirStar 2 PCI / Air2PC DVB PCI]] [http://www.technisat.de/?site=produkte/produkteview.php&kid=1,29&pid=1352&PHPSESSID=69a82464181e34e44928a4fe4ff4fe6c&reload]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.vdr-portal.de/board/thread.php?sid=&postid=154853][http://www.vdr-portal.de/board/thread.php?postid=163580#post163580]<br />
| <br />
* [[Zarlink]] [[Zarlink MT352|MT352]] <br />
* (autodetect in linux kernel driver also includes: cx24123, cx24113, s5h1420 modules)<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
|<br />
* Remote and LIRC Compatible Serial Dongle Included.<br />
<br />
|[[Image:AirStar_DVB-T_PCI.jpg|thumb|120px]]<br />
|}<br />
<br />
=== [[TechnoTrend]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|-<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1200|TT-DVB-T 1200]]<br />
|ca. 210 €<br />
|DVB, VDR<br><br />
|?<br />
|<br />
* Antenna In<br />
* Video Out<br />
|<br />
* The TT-DVB-T 1200 is the only known "[[Full-featured Card|full-featured]]" DVB-T Card.<br />
* Can only tune UHF channels: '''VHF is not supported with this card!'''<br />
|.<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1500|TT-DVB-T 1500]]<br />
<br />
[http://www.technotrend.com/2783/TT-budget__T-1500.html]<br />
|ca. 79 €<br />
|DVB, VDR<br><br />
|Bridge:[[Philips SAA7146]]<br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046]]<br><br />
|<br />
* Antenna In<br />
* [[Common Interface]] (on board connector). Needs to be bought separately.<br />
|<br />
* Gives wrong frequencies when channelscanning in for example xawtv4 and mythtv for at least one user. As long as the channel frequencies are adjusted afterwards everything works fine. (Hardware: 0000:00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01))<br />
* To make the fine piece of remotecontrol that comes with the budget t 1500 card, add these lines to:<br />
* /etc/modprobe.d/options<br />
* options budget_ci rc5_device=255<br />
* And use it with the [http://linuxtv.org/vdrwiki/index.php/Remote-plugin VDR Remote-plugin]<br />
<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1300|TT-DVB-T 1300]]<br />
<br />
[http://www.technotrend.de/english/products/pcproducts3-1.html] [http://www.technotrend.de/english/products/pcproducts3-2.html]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[TechnoTrend TT-PCline Budget3 TA1000|TT-PCline Budget3 TA1000]]<br />
|ca. 90 €<br />
|?<br />
|?<br />
|<br />
* Antenna In<br />
|<br />
* Combination DVB-T and analog (PAL/NTSC)<br />
|[http://www.dvbshop.net/images/budget3.jpg]<br />
|}<br />
<br />
=== [[TerraTec]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1200_DVB-T|Cinergy 1200 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=224]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Bridge: [[Philips SAA7146]]<br><br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* Video In<br />
| <br />
|<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1400_DVB-T|Cinergy 1400 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=244]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Tuner: Thomson [[TT 7579]]<br><br />
Chipset Connexant CX88XX<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
* Remote In <br />
|<br />
* Use cx88xx with option card=30 (if kernel>=2.6.13) or card=19 (if kernel < 2.6.13) and use drivers:<br />
*cx88_dvb <br />
*cx8802 <br />
*cx8800 <br />
*cx88_blackbird (connexant ref. design)<br />
|[[http://www.sandbox.de/dvb-t/TerraTec_Cinergy_1400_DVB-T_PCI.jpg]]<br />
|- valign="top"<br />
|[[TerraTec Cinergy HT PCI|Cinergy HT PCI]] <br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T, Analog TV, Radio<br />
|<br />
* '''Tuner''': Thomson [[TT 7579]]<br />
* '''Chipset''': Philips [[Philips_SAA7134|SAA7134]]<br />
* '''Analog Tuner''': tda8290+75<br><br />
* '''Digital Chipset''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Works with Module saa7134 for analog TV and saa7134-dvb for DVB-T<br />
* Drivers from linuxtv.org work fine, no special options needed.<br />
* Has remote included, does not work for me in linux so far.<br />
* PCI subsystem ID: 153b:1175<br />
* Note: There is an unsupported newer revision under the same name, see below.<br />
|<br />
|- valign="top"<br />
| style="white-space:nowrap" | New [[Cinergy HT PCI]]<br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T<br />
|Chipset [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Newer revision of TerraTec Cinergy HT PCI<br />
* PCI subsystem ID: 153b:1177<br />
* DVB-T working with at least 2.6.35 vanilla, cx23885 + zl10353<br />
|<br />
|}<br />
<br />
=== [[TwinHan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]] [http://www.twinhan.com]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[Hama]] [[DVB-T PCI-Karte]]<br />
|[http://www.twinhan.com/product_terrestrial_4.asp]<br />
<br />
|- valign="top"<br />
|[[DTV Ter PCI (A&D)]] [http://www.conrad.de/script/twinhan_dtv_ter.sap]<br />
VP-30540<br />
|ca. 70 €<br />
|Works ok with FC4 latest 2.6 kernel and cx88xx option card=42.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Conexant]] [[Conexant CX2388x|CX23883]]<br />
* [[Philips]] FMD1216ME<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
You will see 4 new PCI-Devices:<br />
* 14f1:8800 Conexant CX23880/1/2/3 PCI Video and Audio Decoder<br />
* 14f1:8801 unknown<br />
* 14f1:8802 unknown<br />
* 14f1:8804 unknown<br />
<br />
The non-DVB-T (analog-tuner) evtl. works running<br />
modprobe cx88xx tuner=63<br />
<br />
EDIT: Got DVB-T to work with option card=42:<br />
<br>cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro<br />
<br>Playback is smooth the earlier comment about Jekryness was due<br />
<br>to not have overlay switched on. <br />
<br>The card even looks like the digitalnow DNTV Live! DVB-T Pro [http://www.digitalnow.com.au/product_pages/DNTV_Pro.html]<br />
|[http://www.mcsat.co.uk/catalog/images/ter-D+A.gif]<br />
|- valign="top"<br />
|[[TwinHan 3506 Hybrid|3506 Hybrid]]<br />
<br />
[http://www.twinhan.com/product_D%2BA_3056_1.asp]<br />
<br />
|~ £25 in UK<br />
|Works ok with FC7 latest 2.6 kernel and saa7134 module, card=109.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
I<sup>2</sup>C gate tuning problem, you'll need to compile the driver with a small change<br />
|<br />
|}<br />
<br />
=== Ultraview ===<br />
* [[DViCO_FusionHDTV_DVB-T1|Ultraview DVB-T Plus]]<br />
<br />
=== [[Yuan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Stratford PG300]] <br />
<br />
[http://www.yuan.com.tw/en/products/vdo/vdo_PG300.html]<br />
|AUD $45<br />
|DVB, VDR possible<br><br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]] [[Conexant CX22702|CX22702-15]] <br />
|<br />
* Antenna in<br />
* IR in<br />
* Antenna Loop out<br />
|<br />
* Remote & IR-receiver included<br />
* DVB Works with "options cx88xx card=43"<br />
* Remote '''Not''' Working<br />
* Includes Low-Profile bracket<br />
|<br />
[http://www.gamedude.com.au/yuan]<br />
|<br />
<br />
|-<br />
| [[Yuan MPC 788 Hybrid Mini-PCI]]<br />
<br />
[http://www.yuan.com.tw/jp/products/tuner/productscontent3.htm]<br />
| $25USD<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive xc3028<br />
* Demod: ZL10353<br />
* Demux: CX23883<br />
|<br />
* Antenna In<br />
<br />
|<br />
* Remote and external antenna included.<br />
* Same components as Winfast DTV1800 card.<br />
* Analog works with "options cx88xx card=81" in "/etc/modprobe.d/video4linux"<br />
* Tested analog with MPlayer.<br />
* Basic testing with Kaffeine. Kaffeine detected the card and scanned for channels, however testing was done in Canada where no DVB-T signal exist.<br />
|<br />
<br />
|}<br />
<br />
== Currently Unsupported DVB-T PCI cards==<br />
{{help to support}}<br />
<br><br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br><br />
<br>Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures''<br />
|- valign="top"<br />
|'''[[Pinnacle]]<br><br />
[[Pinnacle PCTV DVB-T PCI (250i)|PCTV DVB-T PCI (250i)]]''' [http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+(DVB-S_DVB-T)/PCTV+DVB-T+PCI+(250i).htm]<br><br />
<br><br />
~£26 in the UK<br />
|No support yet<br />
|<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/screenshots/PCTV_DVB-T_PCI_persp_midres.jpg]<br />
<br />
|- valign="top"<br />
|'''[[Leadtek]]<br><br />
[[Leadtek WinFast DTV2000DS PLUS|Winfast DTV2000DS PLUS]]''' [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=overview]<br><br />
<br><br />
~$65 AUD<br />
|Some success with Xubuntu 12.04.<br />
|<br />
* Chipset: [[RealTek RTL2832U]]<br />
* Tuner??<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card.<br />
* Uses VIA onboard PCI-USB bridge and appears as a USB device (ID 0413:6f12)<br />
* Comes with remote control.<br />
* Can be made to work with Xubuntu 12.04 kernel 3.2 - see card page for details.<br />
|<br />
<br />
|- valign="top"<br />
|'''[[X3M digital S.A. | X3M tv-tuners]]<br><br />
[[x3m digital S.A HPC2000|HPC2000]]'''<br>EUR ~45 (Euro)<br />
|No support yet<br><br />
|<br />
*Chipset: Conexant CX23880<br />
*Multiplexer-Demultiplexer: hcf4052<br />
*Demodulator: ZL10353/WJCE6353 <br />
*Tuner: xc3028 (Xceive)<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
* Supports MPEG-2 and MPEG-4(H264)<br />
* it seems to be a [http://www.geniatech.com/dwonloadf/d_dvbt.htm Geniatech DVB-T TV Hybrid X8000MT]; windows drivers of both cards are the same.<br />
* an open source linux driver, seemingly based on an older checkout of the V4L HG tree, can be found at [http://www.geniatech.com/driver-eng/linux/v4l-dvb-experimental-x8000mt.tar.gz]<br />
* the firmware, which the 2.6.31-rc1 kernel tuner driver does not seem to have a loader for, is located at [http://www.geniatech.com/driver-eng/linux/fw25_linux.tar.gz]<br />
* this geniatech firmware is identical with the X3M firmware provided here[http://www.x3mtv-tuners.de/uploads/media/HPC2000_x86_Linux_Treiber.zip] This supports the notion that those cards are in fact identical<br />
* the xc3028-v27.fw firmware extracted from other Xceive tuner based cards' windows drivers via extract_xc3028.pl does not seem to work on this card<br />
* from skimming the source code of the xc3028 driver(kernel and geniatech) it seems to me that the xc3028-v27.fw firmware is simply a binary compound of the same components(though the length of the chunks seems to differ) that are provided in the geniatech firmware.<br />
|<br />
[[Image:Hpc2000.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|'''[[Compro Technology | Compro]]<br><br />
[[Compro VideoMate DVB-T220|VideoMate DVB-T220]]'''<br />
|No support yet<br><br />
Detects as a T200<br />
|<br />
*Chipset: SAA7130<br />
*COFDM Demodulator: MT352<br />
*Tuner: [[Quantek QT1010]]<br />
|<br />
*Antenna In<br />
*S-Video in<br />
*Remote In<br />
|<br />
* DVB-T Card<br />
* Comes with remote control.<br />
|<br />
[[Image:VideoMate_DVB-T220.JPG|thumb|120px|]]<br />
|}<br />
<br />
<br />
[[Category:DVB-T| ]]<br />
[[Category:DVB-T PCI Cards| ]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS_PLUS&diff=31672Leadtek WinFast DTV2000DS PLUS2013-02-05T10:38:38Z<p>Michaelp: Add solution for xubuntu 12.04</p>
<hr />
<div>===Overview===<br />
<br />
This is a dual tuner DVB-T PCI card. It uses an onboard VIA PCI-USB bridge so behaves like a USB device, with USB ID 0413:6f12.<br />
<br />
It has the [[RealTek RTL2832U]] chipset, unlike its sibling the [[Leadtek WinFast DTV2000DS]] which has the Afatech AF9015 and AF9013 chipset. Therefore drivers for the non-plus version will certainly not work.<br />
<br />
Note that the official Leadtek product page [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=specification] falsely states that it has the AF9015 and AF9013.<br />
<br />
The card is currently unsupported, but it is possible to get it working with the existing RTL2832U drivers - see below. It may be similar to the [[Mygica T1800B]] PCI card, since they have very similar general specifications.<br />
<br />
===Identification===<br />
<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 003 Device 002: ID 0413:6f12 Leadtek Research, Inc. <br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0 <br />
bDeviceProtocol 0 <br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6f12 <br />
bcdDevice 1.00<br />
iManufacturer 1 Realtek<br />
iProduct 2 WinFast DTV2000 DS Plus<br />
iSerial 0 <br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 25<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 4 USB2.0-Bulk&Iso<br />
bmAttributes 0xa0<br />
(Bus Powered)<br />
Remote Wakeup<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 1<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 255 Vendor Specific Subclass<br />
bInterfaceProtocol 255 Vendor Specific Protocol<br />
iInterface 5 Bulk-In, Interface<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0 <br />
bDeviceProtocol 0 <br />
bMaxPacketSize0 64<br />
bNumConfigurations 2<br />
Device Status: 0x0000<br />
(Bus Powered)</pre><br />
<br />
===Use with Ambrosa's driver in Xubuntu 12.04===<br />
<br />
I have got this card to work using this driver [https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0] in Xubuntu 12.04 with the 3.2.0.37-generic kernel. I followed the instructions in the driver's README and made one minor edit. The full process is described here. <br />
<br />
1- Install compile kit, linux headers and git<br />
<pre>$ sudo apt-get install build-essential<br />
$ sudo apt-get install linux-headers-$(uname -r)<br />
$ sudo apt-get install git </pre><br />
<br />
2- clone the repository using git and go to source directory<br />
<pre>$ git clone https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0.git<br />
$ cd DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0 </pre><br />
<br />
4- edit Makefile to change the option INCLUDE_EXTRA_DVB to suit the 3.2 kernel. This means commenting out the line "INCLUDE_EXTRA_DVB := include-300" and uncommenting the line "INCLUDE_EXTRA_DVB := include-320". Obviously don't do this if you have a 3.0 kernel. (3.0 kernel is untested with this card).<br />
<br />
5- '''Now the special step!''' Edit the header file rtl2832u.h so that our device is recognised. The simplest way is to find the line <br/><br />
"#define USB_PID_LEADTEK_WARM_2 0x6F11" <br/><br />
and change the last digit to 2 so it reads<br/><br />
"#define USB_PID_LEADTEK_WARM_2 0x6F12". <br/><br />
This means we have stolen the Product ID of another Leadtek device that uses this driver. Simply adding a new line like <br/><br />
"#define USB_PID_LEADTEK_WARM_4 0x6F12" <br/><br />
is not sufficient.<br />
<br />
6- Now continue with the README instructions. Compile the code, install and insert the module.<br />
<pre>$ make clean<br />
$ make<br />
$ sudo make install<br />
$ sudo modprobe dvb_usb_rtl2832u</pre><br />
<br />
This method worked with VLC.</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=DVB-T_PCI_cards&diff=31671DVB-T PCI cards2013-02-05T03:45:02Z<p>Michaelp: /* Currently Unsupported DVB-T PCI cards */</p>
<hr />
<div>On this page you will find information regarding [[DVB-T]] [[PCI]] cards.<br />
<br />
{{non-exhaustive list}}<br />
<br><br />
==Supported DVB-T PCI Cards==<br />
The following table lists the confirmed working DVB-T PCI cards and provides a brief summary of their features and components. If you need more technical information on a device, have a look at its specific wiki article. <br />
<br />
=== [[ASUS]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Type'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[ASUS My Cinema-P7131 Hybrid|My Cinema-P7131 Dual]]<br />
<br />
[[Image:ASUS-MyCinema-P7131-Dual-box.jpg|thumb|120px]]<br />
|DVB-T + Analog [http://uk.asus.com/products.aspx?l1=18&l2=83&l3=252&l4=0&model=547&modelmenu=1]<br />
|ca. 45 €<br />
|DVB, VDR<br />
| <br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* DVB-T/FM in<br />
* Analog TV in<br />
* IR in<br />
* AV in (with cable to composite, S-video and audio)<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* With Low-Profile bracket<br />
* Supports FM-radio<br />
* Needs firmware (dvb-fe-tda10046.fw); see the [[ASUS My Cinema-P7131 Hybrid|P7131 article]]<br />
- Following the above article works under Ubuntu 7.10 (Gutsy Gibbon) using Kaffeine 0.8.5 (running the Xine Player Engine ewith the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package)<br />
|[http://www.bttv-gallery.de/HPIM2609.JPG_asus_tiger_302_a.jpg]<br />
[[Image:ASUS-MyCinema-P7131-Dual.jpg|thumb|50px]]<br />
[[Image:ASUS-MyCinema-P7131-Dual-rear.jpg|thumb|50px]]<br />
|}<br />
<br />
=== [[AVerMedia]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T (A761) | AVerTV DVB-T (A761)]]<br />
<br />
<strike>[http://www.avermedia.de/Products/TV_Tuner/DVB-T/main.htm]</strike><br />
<br />
oldest AVerTV DVB-T model<br />
|ca. 90 €<br />
|DVB, VDR<br />
<br />
[http://www.vaslet.de]<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
* S-Video in<br />
* Composite in<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* Low-Profile-Card<br />
* Difference compared to 771 is the Tuner and Composite-in<br />
|<strike>[http://www.avermedia.de/Products/images/Products/DVB-T_FB.jpg]</strike><br />
[http://www.vaslet.de/content/dvbt/averdvb_a761_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_761.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 771 (A771) | AVerTV DVB-T 771 (A771)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt771.asp?show=1]<br />
|ca. 90 €<br />
|DVB, VDR possible<br />
<br />
[http://www.gossamer-threads.com/lists/mythtv/users/72584] [http://www.frokaschwei.net/avtv771/avermedia.html], [http://www.mail-archive.com/linux-dvb@linuxtv.org/msg17579.html] [http://www.vaslet.de]<br />
<br />
Warning some people experience problems with this card search for mt352_read_register on the mailing list.<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-rerceiver included<br />
* Low-Profile-Card<br />
* Difference to the older "761" is the Tuner and the missing Composite-in<br />
|<strike>[http://www.avermedia.de/Products/TV_Tuner/dvbt771/771.jpg]</strike> [http://www.vaslet.de/content/dvbt/averdvb_a771_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_771.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16AR) | AVerTV DVB-T 777 (A16AR)]]<br />
<br />
newest model of the AVerTV DVB-T<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. 65 €<br />
|DVB, VDR ab 2.6.17-rc1<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-receiver included (v4l-dvb needs a patch to properly work)<br />
* Works on Ubuntu 6.10 "almost" out of the box.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:Avermedia777.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16A-C)| AVerTV DVB-T 777 (A16A-C)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. ? €<br />
|DVB<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Tested on 32bit Fedora 9.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:AVER777A16A-C_front.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV Hybrid+FM PCI (A16D)| AVerTV Hybrid+FM PCI (A16D)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI(A16D).asp?show=1#]<br />
|ca. 80 €<br />
| Analogue, kernel 2.6.26; <br />
DVB-T, kernel 2.6.27<br />
<br />
For DVB and experimental support, see [http://mcentral.de/wiki/index.php5/AVerMedia_AverTV_Hybrid_FM_PCI_A16D here], and maybe [http://mcentral.de/wiki/index.php5/AverMedia_Cardbus_Hybrid_TV_FM_E506R here]<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Xceive]] [[Xceive XC3018|XC3018]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|[http://www.avermedia.com/docs/productimage/AVerTV-Hybrid+FM-PCI-b.jpg]<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[AVerMedia AVerTV Hybrid+FM PCI (A16AR)| AVerTV Hybrid+FM PCI (A16AR)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI.asp?show=1]<br />
|<br />
| Yes<br />
FM radio not supported<br />
|<br />
* Philips TD1316A (tuner)<br />
* Philips TDA9887 (analog demodulator)<br />
* Philips SAA7135HL (A/V decoder)<br />
* Zarlink MT352 (DVB-T demodulator)<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|<br />
<br />
|- valign="top"<br />
|[[AVerMedia_AVerTV_DVB-T_Super_007 | AVerTV DVB-T Super 007]]<br />
<br />
[http://www.avermedia.com/EN/Default.aspx?TYPE=vipplayercard.htm&PT=product&tv_TCAT_POS=0&PID=4710710671877]<br />
|ca. 60 €<br />
| Yes (with [http://lists.zerezo.com/video4linux/msg19205.html patch])<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* DVB-T / Analog<br />
* Remote and Infra-red-receiver included<br />
* (this is "Hybrid Super 007" with Analog+DVB-T or "DVB-T Super 007" with only DVB-T?)<br />
|<br />
[[Image:Super_007_box.jpg|thumb|50px|]]<br />
[[Image:Super_007_card.jpg|thumb|50px|]]<br />
|<br />
<br />
*<br />
* DVB-T DUAL LV32TDLX<br />
|}<br />
<br />
=== [[ChainTech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[DTT 1000 PCI]]<br />
<br />
<strike>[http://www.chaintech.com.tw/tw/eng/product_spec.asp?MPSNo=15&PISNo=170]</strike><br />
|ca. 100 €<br />
|DVB, VDR<br> (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Hangs at least older kernels (<2.6.12) unless the bttv module is loaded with parameters "i2c_hw=1 card=0x71". This may cause boot problems when the module is automatically loaded by hotplug.<br />
|<strike>[http://www.chaintech.com.tw/tw/images/Products/DMPD/DTT1000_L.jpg]</strike><br />
|}<br />
<br />
=== [[Club 3D]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[ZAP-TV2202]]<br />
<br />
[http://www.club3d.nl/index.php/products/zaptv/item/11]<br />
<br />
[http://www.club3d.nl/support/manuals/zap-tv/2202/ZAPTV2202_QuickGuide.pdf Manual]<br />
|ca. 67 €<br />
|DVB, Analogue<br />
| Philips [[Philips SAA7131|SAA7131]]<br />
|<br />
* Antenna In<br><br />
* Radio In<br><br />
* S-Video In In<br><br />
|<br />
* Shows up as device 169d:3306<br />
* Installed with command modprobe saa7134 card=94<br />
|<br />
|}<br />
<br />
=== [[Compro Technology|Compro]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[Compro VideoMate T200|VideoMate DVB-T200]]<br />
[http://www.comprousa.com/New/en/product/vmt200.html]<br />
|ca. 37 €<br />
|DVB kernel 2.6.17<br />
| Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br><br />
* S-Video In<br><br />
* Composite In<br><br />
|<br />
* Remote and Infra-red-receiver included <br />
(to get the irda working correctly you may find this mail useful [http://marc.theaimsgroup.com/?l=linux-video&m=113672404400380&w=2] )<br />
* HDTV *(1080i / 720P) ready<br />
* Power on via irda<br />
* warning: problems with poor reception: [http://cvs.mythtv.org/trac/ticket/2664]<br />
|<br />
|}<br />
<br />
=== [[DViCO]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[FusionHDTV Dual Digital 4]]<br />
<br />
[http://www.fusionhdtv.co.kr/ENG/products/DVBTdual4.aspx]<br />
|<br />
* DVB, VDR<br />
* <strike>works with [http://fremnet.net/article/228/dvico-fusionhdtv-dual-digital-4-under-linux patches] - (non Australian users should ignore the dd4.au.patch patch and not use the xc3028.au2.fw firmware).</strike> See https://help.ubuntu.com/community/DViCO_Dual_Digital_4<br />
Revision 2 of this card has just been released ([http://mandmservices.com.au/dvico image]). The new card uses a DIBCOM tuner and modulator <strike>and does not work under the current driver.</strike><br />
<br><br />
The linuxTV drivers are now updated, the revision two works beautifully. The changes do not yet seem to be merged with the Linux kernel (2.6.27), the link above should help you install the drivers. The Rev 2 card may not work properly with older kernels such as 2.6.22 (AMD 780G chipsets, USB disconnects), even using the latest linuxTV drivers. The following link also has some useful information: http://ubuntuforums.org/showthread.php?t=616103 <br />
|Rev 1- Zarlink ZL10353<br />
Rev 2- Dibcom 7070pb1 tuner, CY7C68013A USB peripheral controller, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna in<br />
* IR In<br />
|<br />
* Dual DVB-T tuner card<br />
* Supports HD streams<br />
* <strike>Requires patching</strike><br />
* Is actually two USB devices attached though a Via PCI-to-USB bridge<br />
* Uses <tt>dvb-usb-cxusb</tt> module<br />
* Rev 2 uses <tt>dib0070, dib7000p, dib7000m, dib3000mc, dibx000_common</tt> modules<br />
* Includes low-profile PCI bracket<br />
|<br />
[[Image:DViCO_FusionHDTV_Dual_Digital_4.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|<br />
FusionHDTV Dual Digital 2<br />
|<br />
* DVB-T<br />
| <br />
* CX23880<br />
|<br />
* Antenna In<br />
* IR In<br />
* S-Video In<br />
* USB Type-B connector<br />
|<br />
* Dual PCI/USB device - has a loopback cable<br />
* Works out of the box in Ubuntu 10.04 (and earlier versions)<br />
* Low-Profile<br />
|<br />
(No Picture)<br />
|}<br />
<br />
* [[DViCO FusionHDTV DVB-T1]]<br />
* [[DViCO FusionHDTV DVB-T Lite]]<br />
<br><br />
<br />
=== [[GDI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[GDI Black Gold]]<br />
<br />
[http://www.blackgold.tv/products/digital.htm]<br />
|<br />
|S-Video support works (Small patch which is now in CVS). DVB doesn't work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]]/Front End CX22702/Tuner Philips TU1216/[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]] demodulator<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
|Like this, but slightly longer with a heat sink. <br><br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_Plan.jpg Card]<br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_End.jpg Connectors]<br />
|}<br />
<br />
=== [[Geniatech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech X8000-MT|X8000-MT]]<br />
<br />
[http://www.geniatech.com/pa/x8000t.asp]<br />
| 45 €<br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23883]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 <br><br />
Identical board to [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[[Image:X8000T-DVBT-PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Hama]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[DVB-T PCI-Karte]]<br />
<br />
<strike>[http://www.hama.de/portal/articleId*110877/action*2563/searchMode*1/bySearch*dvb-t]</strike><br />
|ca. 80 €<br />
|DVB, VDR possible<br><br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|[[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[TwinHan]] [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]]<br />
|[http://www.hama.de/bilder/00049/abb/00049019abb.jpg]<br />
|}<br />
<br />
=== [[Hauppauge]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|Old [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(until 06/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* '''Since 07/2004 Hauppauge have been shipping a new Nova-T (see below)'''<br />
* Comes with remote<br />
[[Image:Hauppauge_nova-t_remote.jpg|thumb|30px|]]<br />
|[[Image:Hauppauge_nova-t_old.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|New [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(since 07/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|ca. 100 €<br />
|Works with patches from [http://dl.bytesex.org/patches/] or >= kernel 2.6.12<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* Remote In<br />
|<br />
* Drivers included in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* Comes with same remote as the older model<br />
|[http://sulu.sohanet.de/tmp/]<br />
[[Image:Hauppauge_nova-t_juli2004.jpg|thumb|50px|]]<br />
[[Image:Hauppauge_nova-t_juli2004_Packung.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge WinTV-NOVA-T-500|WinTV-NOVA-T-500]]<br />
<br />
(since 09/2006) [http://www.hauppauge.co.uk/pages/products/data_novat500.html]<br />
|ca. 100 €<br />
|works with v4l-dvb hg from 2006-09-20 [http://www.linuxtv.org/repo/] or kernel >= 2.6.19 - <br />
|[[DiBcom]] [[DiBcom DiB7xxx|DiB0700]]<br />
|<br />
* Antenna In<br />
* Remote In (should now be working)<br />
|<br />
*Dual DVB-T tuner card.<br />
*As of 28/08/2008, according to Michael Krufky, all currently released versions, including the Diversity model, are supported by head of v4l-dvb hg, and the driver is likely to stay ahead of new card releases in the future.<br />
*PCI 2.2 card using 3.3V. Failed to run on PCI 2.1 system.<br />
|<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1300|WinTV-HVR-1300]] (since 07/2005)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1300.html]<br />
(HVR-1100 is similiar to HVR-1300, but without MPEG hardware encoder)<br />
|ca. 130 €<br />
|Digital & Analogue working in repository [http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=3e90edbf7c53584f109fe091d7380e8bda9fa282;style=gitweb]. Encoder support being worked on.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* DVB support in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* This card has tuning problems in MythTV and Kaffeine (works with tzap). See the card page.<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|[http://sulu.sohanet.de/tmp/][[Image:100 7999.JPG|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1110|WinTV-HVR-1110]] (since 09/2006)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1110 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10046 chipset)<br />
|ca. 70 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported with the latest 2.6.18 kernel, need latest v4l-dvb (mercurial) to work on older kernels. See [http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_Mercurial].<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1120|WinTV-HVR-1120]] (since 05/2009)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1120 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10048 chipset)<br />
|ca. 50 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported since kernel 2.6.31. <br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-3000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr3000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hvr3000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hvr3000.jpg|thumb|50px|]]<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-4000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr4000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, DVB-S2 and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|50px|]]<br />
<br />
|}<br />
=== [[Jactek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech JH-600|JH-600]]<br />
<br />
[http://www.jactek.com.tw/product_pctv/product_jh600.html]<br />
| <br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-2388x]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Identical board to [[Geniatech X8000-MT|X8000-MT]], [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[http://www.jactek.com.tw/product_pctv/images/product_jh600_34.jpg]<br />
|}<br />
<br />
=== [[KNC1]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[KNC1 TV-Station DVB-T | TV-Station DVB-T]] <br />
<br />
[http://www.kncone.de/d/produkte/digital_dvb_t.htm]<br />
<br />
|ca. 80 €<br />
|DVB, ? <br />
|Philips [[Philips SAA7146|SAA7146]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* [[Common Interface]]<br />
| <br />
|<br />
|}<br />
<br />
=== [[KWorld]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[KWorld_V-Stream_Xpert_DVB-T_PCI|V-Stream Xpert DVB-T PCI]] <br />
<br />
[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.html]<br />
|ca. 80 €<br />
|DVB, VDR possible [http:///www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00716.html] New card:[http://www.manenti.org/blog/archives/000089.html]<br />
Full support :[[http://linuxtv.org/wiki/index.php/KWorld_V-Stream_Xpert_DVB-T_%28tuner_THOMSON_DTT_7579%29]]<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite In<br />
* Remote In<br />
|<br />
* Remote & IR-receiver included<br />
* There are three versions of this card, one with a Samsung tuner similar to the AVerMedia 771, another with a Thomson tuner (similar to the Nova-T 90002) and another with Thomson tuner DTT 7579. All versions are supported. <br />
|[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.jpg]<br />
|- valign="top"<br />
|[[KWorld DVB-T 220 | DVB-T 220]]<br />
<br />
[http://www.kworld.com.tw/en/kworld/body/Products/D+A/DVB-T220.htm]<br />
|<br />
|DVB, analogue<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In (two)<br />
* FM In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe saa7134-dvb' to enable DVB.<br />
| <br />
[[Image:kworld_DVB-T220.jpg|thumb|120px]]<br />
<br />
|- valign="top"<br />
|[[KWorld_DVBT-100 | DVBT-100]]<br />
<br />
[http://www.kworld.com.tw/en/index_digital.htm]<br />
|<br />
|DVB, analogue<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite video In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe cx88-dvb' to enable DVB. Suspected same card as KWorld_V-Stream_Xpert_DVB-T_PCI. <br />
|<br />
<br />
|- valign="top"<br />
|[[KWorld DVB-T PC160-2T | DVB-T PC160-2T ]]<br />
<br />
[http://www.kworld.com.tw/product_overview.aspx?P_ID=215]<br />
|<br />
| '''NOTE: This card is IDENTICAL to Leadtek DTV2000DS, except for the USB ID, the remote, and the sticky label on the tuners!'''<br />
So please refer to DTV2000DS for extra info.<br />
Dual DVB-T tuners, also known as PEAK DVB-T Dual tuner PCI (221544AGPK)<br />
Working as single tuner card (at least) on 2008-06-05<br />
http://linuxtv.org/hg/~anttip/af9015-mxl500x-copy-fw/<br />
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files<br />
Ref http://marc.info/?l=linux-dvb&m=121268349100641&w=2<br />
A single tuner variant (PC-160-T) is now also supported.<br />
|[[Afatech AF9015|AF9015]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Note that curent kernel versions do not have a keymap for the provided remote, see here for some info about setting up a custom keymap: http://francisfisher.me.uk/problem/2012/kworld-pc160-2t-remote-control-on-ubuntu-linux-11-10-2/<br />
* From my experience, the latest driver (23/03/12) has some bugs that require daily hard resets of the device.<br />
* KWorld support are not interested in providing any assistance getting the device working: "Sorry,we can't help you to solve the remote problem in Linux,since we don't highlight/mention that it can support this system. If you have the problem in Windows system,we are willing to help you solve it."<br />
| <br />
[[Image:Kworld pc160.jpg|thumb|120px]]<br />
<br />
<br />
|}<br />
<br />
=== [[Leadtek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 S|WinFast DTV1000 S]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=382&check=f]<br />
|<br />
| DVB<br />
| [[Chipset NXP 18271 + 10048 + 7130]]<br />
|<br />
* TV Antenna In<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Drivers will be included in 2.6.33 Kernel. Meanwhile can be downloaded http://kernellabs.com/hg/~mkrufky/dtv1000s<br />
* The tuner works with Mythbuntu 9.10 as does remote.<br />
| <br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 T|WinFast DTV1000 T]]<br />
[http://www.leadtek.com.tw/eng/tv_tuner/overview.asp?lineid=6&pronameid=220]<br />
|<br />
| DVB<br />
| [[Conexant Systems, Inc.|Conexant]] based system see [[LR6650]]<br />
|<br />
* TV Antenna In<br />
* TV antenna out (loop through)<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Since kernel 2.6.15-rc1<br />
* The tuner works with Mythbuntu 7.10 (i386) but the remote doesn't.<br />
* In Australia, this card appears to have been superseded by the DTV 1000 S which uses a different chipset and apparently is not supported.<br />
| [http://www.leadtek.com.tw/eng/tv_tuner/image/winfast_dvt1000t_2.jpg]<br />
<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H]]<br />
| $AUD 80<br />
| DVB<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 6-pin for video in<br />
|<br />
* DVB-T works with Ubuntu 7.10 (i386), Kaffeine 0.8.5 and the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package<br />
* FM tuner is not found, no radio function<br />
|<br />
<br />
|-<br />
| [[Leadtek WinFast DTV1800 H|WinFast DTV1800 H]]<br />
| $AUD 75<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 (on latest cards on sale in Aus), earlier cards had Xceive xc3028<br />
* Demod:ZL10353<br />
* Demux:CX23883<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
* Comes with remote control<br />
|<br />
* Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html]. Tested with Kaffeine and Australian DVB-T Broadcasts.<br />
* IRC works but default key mapping is incorrect with KDE4 - needs work.<br />
|[http://dev.gentoo.org/~dragonheart/winfast/_MG_1893.JPG]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000DS|WinFast DTV2000DS]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530]<br />
| $AUD 65<br />
| DVB-T<br />
|<br />
* '''Tuner''': '''NXP TDA18211, but detected as TDA18271 by V4L drivers'''<br />
* '''Chipset''': AF9015 + AF9013<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x ph jack for IR sensor<br />
|<br />
* Dual DVB-T tuner card<br />
'''* Read the page regarding the working status of this card.'''<br />
* Supports HD streams<br />
* Is actually two USB devices attached though a VIA VT6210L PCI-to-USB bridge<br />
* Uses dvb_usb_af9015 and af9013 modules<br />
* Includes low-profile PCI bracket<br />
* Includes remote and Infra-Red sensor<br />
* Warning: The DTV2000DS '''PLUS''' is a completely different card and is unsupported. <br />
| [[Image:Leadtek dtv 2000ds 2s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|50px]]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H rev J]]<br />
| $AUD 75<br />
| DVB Analog Hybrid<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX23881|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* 1 x 4 pin audio output connector (internal CD audio type)<br />
|<br />
* Random success with analog OR DVB-T video no sound<br />
* See: [http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H]:<br />
* Add "cx88-dvb" to /etc/modules<br />
* Add "options cx88xx card=51" to /etc/modprobe.d/options<br />
* Add "options cx88xx card=51,51" to /etc/modprobe.d/options if using two cards<br />
* Try adding "options cx88-alsa index=1,2" to /etc/modprobe.d/options and use /dev/dsp in MythTV Frontend if having sound issues in MythTV<br />
* DTV + audio worked out of box in Mythbuntu 8.10 and Ubuntu 8.10. <br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H Plus|WinFast DTV2000 H Plus]]<br />
| $AUD 100<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 on older cards (eg 107d:6f42), Xceive XC3028 on newer cards (eg 107d:6f44)<br />
* Demod:ZL10353<br />
* Demux:CX2388x<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* Comes with remote control<br />
|<br />
* 107d:6f42: Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html].<br />
* 107d:6f44: DVB-T works with "options cx88xx card=81" (using the vanilla v4l) in /etc/modprobe.d/video4linux but none of the other inputs work. Analog works with "options cx88xx card=51" but DVB-T doesn't, even when tuner=71 is specified.<br />
|<br />
<br />
|}<br />
<br />
=== [[LifeView]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T|FlyDVB-T]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt.htm]<br />
|<br />
|DVB-T only<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Composite in<br />
* Remote In<br />
|<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR301.jpg|thumb|85px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Duo|FlyDVB-T Duo]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_duo.htm]<br />
|<br />
|DVB-T and Analog<br />
|Philips [[SAA7133]]<br />
|<br />
* Cable/Antenna In (two)<br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR306.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|[[LifeView FlyDVB Trio| FlyDVB Trio]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvb_trio.htm]<br />
|<br />
|DVB-T, Satellite and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Satellite Antenna In<br />
* Digital Antenna In<br />
* Analog Antenna In<br />
* S-Video/Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:photo_dvb_trio.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Hybrid|FlyDVB-T Hybrid]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_hybrid.htm]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
|<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[LifeView FlyDVB-T Hybrid MCE PRO|FlyDVB-T Hybrid MCE PRO]]<br />
|<br />
|DVB-T and Analog HW encoder<br />
|<br />
* Philips [[SAA7131]] <br />
* Vixs encoder<br />
|<br />
* Cable/Antenna In <br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Hybrid analog/digital HW encoder card<br />
* Supported by Linux kernel 2.6.15<br />
|[[Image:323.jpg|thumb|120px|]]<br />
|}<br />
<br />
=== [[Lorenzen]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[SL DVB-T PCI]] <br />
<br />
<strike>[http://www.lorenzen.de/produkte/cgi-bin/iboshop.cgi?showd60!,3709831960,3930]</strike><br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
* Can support +5V power supply for Antenna (Jumper on board)<br />
| <strike>(Old Design): [http://www.lorenzen.de/produkte/bilder/3922%20200.jpg]</strike><br />
[[Image:Lorenzen_SL_DVB-T_PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Medion]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Medion CTX953 | CTX953]] <br />
<br />
(a.k.a Creatix CTX 953: [http://www.creatix.de/produkte/multimedia/ctx953.htm])<br />
|<br />
| DVB-T tested and works with 2.6.29, analog is untested by me. I suspect it works, too.<br />
|<br />
* NXP SAA 7131E/03/G<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
* NXP 8275AC1<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Audio-In (3.5mm)<br />
* Composite-In<br />
|<br />
* ml-thread: [http://article.gmane.org/gmane.comp.video.video4linux/34255]<br />
|<br />
[[Image:Medion_CTX953_front.jpg|thumb|150px|]]<br />
[[Image:Medion_CTX953_back.jpg|thumb|150px|]]<br />
<br />
|- valign="top"<br />
|<br />
Philips TV/Radio Card CTX918, (Medion 7134), PCI<br />
<br />
|~6€, Ebay Germany<br />
|DVB-T working, FM apparently too ([http://linuxtv.org/v4lwiki/index.php/Generic_SAA7134_Card_Installation Instructions])<br />
|<br />
<br />
* FMD1216ME<br />
* Philips SAA7134HL<br />
* SV92PL<br />
* CSP1034S<br />
<br />
|<br />
* Antenna In<br />
* FM In<br />
|<br />
[http://www.creatix.de/support/download/gruppe6/CTX918_spec.pdf Spec]<br />
[http://www.creatix.de/support/typ.php?tid=62&gid=6 Link to OEM]<br />
|<br />
[[Image:7134.jpg|thumb|150px|]]<br />
|}<br />
<br />
=== [[MSI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D|TV@nywhere A/D]]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
* clone of LifeView FlyDVB-T Hybrid<br />
* requires "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1]] <br />
|Around $65 AUD<br />
|'''Unsupported'''<br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* As of kernel 2.6.23.13 the frontend seems to not work, even with "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1 alternate]] <br />
|Around $65 AUD<br />
|Analog and DVB-T (partially)<br />
|<br />
*Philips [[SAA7131E]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
*Tuner 8275AC1<br />
|<br />
* FM Antenna in<br />
* TV Antenna in<br />
* AV input (comes with adaptor that allows connection of s-video or composite video as well as RCA connectors for audio) <br />
* IR-Remote<br />
|<br />
* This card mostly works with the latest drivers as of 2008-02-08 (tested using mythbuntu 2.6.22-14-generic kernel). There is a problem with unreliable firmware loading. The card only works if the firmware loads correctly.<br />
* Requires card=109<br />
|<br />
[[Image:MSI TV@nywhere A-D v1.1.JPG|thumb|120px]]<br />
|}<br />
<br />
<br />
=== [[Mygica]] ===<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Mygica T1800B|T1800B]]<br />
| 70 AUD<br />
|Dual DVB-T, DAB+ (untested), Remote Control (untested), <br />
|RTL2832U<br />
|<br />
* Antenna In<br />
* AV In<br />
|Requires out-of-tree drivers (see documentation)<br />
|[http://www.auspcmarket.com.au/info/EL-MY-T1800B/]<br />
|- valign="top"<br />
|[[Mygica T188|T188]]<br />
| 30 AUD<br />
|Single DVB-T, DAB+ (untested), Remote Control (untested)<br />
|RTL2832U, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* Uses same (out-of-tree) drivers as the T1800B.<br />
* Driver appears to have bug which prevents getting a signal lock if more than one of these cards are present.<br />
|[http://i49.tinypic.com/68rfon.jpg]<br />
|}<br />
<br />
=== [[Nebula]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Nebula DigiTV PCI|DigiTV PCI]]<br />
<br />
[http://www.nebula-electronics.com/information/info.asp?Code=0001]<br />
|ca. 150 €<br />
|DVB,VDR<br> NXT6000 demod supported by recent kernels, mt352 demod will be supported by kernels >= 2.6.14-rc1.<br />
|<b>Demod Chip</b><br><br />
<i>Old board:</i><br> <br />
[[ATI NXT6000]]<br><br />
<i>New board:</i><br><br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br><br />
<b>Tuner (tin box)</b><br><br />
[[Alps TDED4]] <i>(both boards)</i><br><br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* AV In<br />
* Remote In<br />
|<br />
* Comes with remote<br />
|[http://www.nebula-electronics.com/images/ProdPCI.jpg]<br />
|}<br />
<br />
=== [[NotOnlyTV]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[NotOnlyTV LV3H|LV3H]]<br />
<br />
[http://www.notonlytv.net/p_lv3h.html]<br />
| 39 €<br />
|<br />
*DVB-T <br />
*Analog (brightness problems)<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23881]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 (Geniatech X8000-MT DVBT)<br><br />
Some options are needed to work properly: <br />
<code>options cx88xx card=81 tuner=71</code><br />
|[http://www.notonlytv.net/img/products/lv3h_01.jpg]<br />
|}<br />
<br />
=== [[NPG]] ===<br />
<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Real DVB-T]] <br>[http://www.npgtech.com]<br />
|<br />
|Doesn't seem to work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23880-19]] CX22702-25<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
* 2.6.16 kernel recognizes the card as "Conexant DVB-T reference design" (card=19)<br />
|<br />
|}<br />
<br />
=== [[Pinnacle]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[PCTV MediaCenter 300i]]<br />
<br />
[http://www.pinnaclesys.com/ProductPage_n.asp?Product_ID=2451&Langue_ID=4]<br />
|ca. 110 €<br />
<br />
(~40 € for "Dazzle" package with no remote)<br />
|DVB works with patches from [http://dl.bytesex.org/patches/], but see this thread [http://www.linuxtv.org/pipermail/linux-dvb/2005-December/007035.html] for recent regression post 2.6.12<br />
Everyone seems happy using Hartmut's Patch [http://www.linuxtv.org/pipermail/linux-dvb/2006-February/008345.html] with more recent kernels. Check the associated thread for more info...<br />
<br />
July 2006: Worked out of the box with recent kernel 2.6.17 Debian unstable!<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br />
[[tda9887]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/ProductImages/Ss_01_MediaCenter300iB_02.jpg]<br />
<br />
[http://www.pinnaclesys.com/images/box/box_128x148_pctvmediacenter300i_bl_4.jpg]<br />
|- valign="top"<br />
|[[PCTV MediaCenter 310i]]<br />
<br />
[http://www.pinnaclesys.com/PublicSite/sp/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+310i.htm]<br />
|ca. 110 €<br />
|DVB works with Debian AMD64 testing<br />
<br />
Worked out of the box with recent kernel 2.6.20<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
[[tda8275A]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
* Quality better than Pinnacle software for win xp.<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[PCTV Dual DVB-T Pro PCI / 2000i]] <br />
<br />
[http://www.pinnaclesys.com/PublicSite/de/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+%28DVB-S_DVB-T%29/PCTV+Dual+DVB-T+Pro+PCI.htm]<br />
|ca. 120 €<br />
|Not working so far (Oct.2006). Shows up as three unknown PCI devices ID 0040, 0041, 0042 with subsystems 0044. Manufacturer ''Pinnacle Systems Inc.'' detected correctly.<br />
|2x [[Zarlink ZL10353]]<br> 2x [[Microtune MT2060]]<br />
[[PINNACLE DTV BRIDGE 0612MP007/0611MP007]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Dual DVB-T tuner card.<br />
* Comes with remote control. Uses Pinnacle's own application, might not be avalable for Linux.<br />
* [http://reactorcore.net/v4l/pctv-2000i High Quality Pictures]<br />
|[http://www.sandbox.de/dvb-t/Pinnacle_Dual_DVB-T_Pro_PCI.jpg]<br />
|}<br />
<br />
=== [[Satelco]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Satelco Easywatch PCI DVB-T]]<br />
<br />
[http://www.satelco.de/htm/shop/popup/intro_dvb_t.htm]<br />
|<br />
ca. 60 €<br />
|<br />
*Not supported yet by present kernel release (2.6.25).<br />
*A [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=251130bf266000fe6e9fdccda50fe4b5c1d6cb24 patch] is on the way. Latest [http://linuxtv.org/hg/v4l-dvb v4l-dvb drivers] should be [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers#Case_2:_Installation_of_LinuxTV_Drivers_Required manually compiled] (this requires kernel 2.6.19 or higher).<br />
*This card is not suitable for [http://knoppmyth.net/knoppmyth.html KnoppMyth R5F27], as the aforementioned workaround may be tricky to apply to the distro's kernel (2.6.18-chw-13).<br />
|<br />
* '''PCI bridge''': [[Philips SAA7146]]<br />
* '''Tuner''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In (top)<br />
* Antenna Out (bottom)<br />
|<br />
Onboard connector to Common Interface extension kit (not included).<br />
|<br />
[http://www.satelco.de/img/produkte/easywatch/easywatch_dvb_t_2.jpg]<br />
[http://www.satelco.de/img/produkte/easywatch/dvbt/thumb/tn_2vorne.jpg]<br />
|}<br />
<br />
=== [[TechniSat]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TechniSat AirStar 2 PCI / Air2PC DVB PCI|AirStar 2 PCI / Air2PC DVB PCI]] [http://www.technisat.de/?site=produkte/produkteview.php&kid=1,29&pid=1352&PHPSESSID=69a82464181e34e44928a4fe4ff4fe6c&reload]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.vdr-portal.de/board/thread.php?sid=&postid=154853][http://www.vdr-portal.de/board/thread.php?postid=163580#post163580]<br />
| <br />
* [[Zarlink]] [[Zarlink MT352|MT352]] <br />
* (autodetect in linux kernel driver also includes: cx24123, cx24113, s5h1420 modules)<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
|<br />
* Remote and LIRC Compatible Serial Dongle Included.<br />
<br />
|[[Image:AirStar_DVB-T_PCI.jpg|thumb|120px]]<br />
|}<br />
<br />
=== [[TechnoTrend]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|-<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1200|TT-DVB-T 1200]]<br />
|ca. 210 €<br />
|DVB, VDR<br><br />
|?<br />
|<br />
* Antenna In<br />
* Video Out<br />
|<br />
* The TT-DVB-T 1200 is the only known "[[Full-featured Card|full-featured]]" DVB-T Card.<br />
* Can only tune UHF channels: '''VHF is not supported with this card!'''<br />
|.<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1500|TT-DVB-T 1500]]<br />
<br />
[http://www.technotrend.com/2783/TT-budget__T-1500.html]<br />
|ca. 79 €<br />
|DVB, VDR<br><br />
|Bridge:[[Philips SAA7146]]<br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046]]<br><br />
|<br />
* Antenna In<br />
* [[Common Interface]] (on board connector). Needs to be bought separately.<br />
|<br />
* Gives wrong frequencies when channelscanning in for example xawtv4 and mythtv for at least one user. As long as the channel frequencies are adjusted afterwards everything works fine. (Hardware: 0000:00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01))<br />
* To make the fine piece of remotecontrol that comes with the budget t 1500 card, add these lines to:<br />
* /etc/modprobe.d/options<br />
* options budget_ci rc5_device=255<br />
* And use it with the [http://linuxtv.org/vdrwiki/index.php/Remote-plugin VDR Remote-plugin]<br />
<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1300|TT-DVB-T 1300]]<br />
<br />
[http://www.technotrend.de/english/products/pcproducts3-1.html] [http://www.technotrend.de/english/products/pcproducts3-2.html]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[TechnoTrend TT-PCline Budget3 TA1000|TT-PCline Budget3 TA1000]]<br />
|ca. 90 €<br />
|?<br />
|?<br />
|<br />
* Antenna In<br />
|<br />
* Combination DVB-T and analog (PAL/NTSC)<br />
|[http://www.dvbshop.net/images/budget3.jpg]<br />
|}<br />
<br />
=== [[TerraTec]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1200_DVB-T|Cinergy 1200 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=224]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Bridge: [[Philips SAA7146]]<br><br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* Video In<br />
| <br />
|<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1400_DVB-T|Cinergy 1400 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=244]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Tuner: Thomson [[TT 7579]]<br><br />
Chipset Connexant CX88XX<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
* Remote In <br />
|<br />
* Use cx88xx with option card=30 (if kernel>=2.6.13) or card=19 (if kernel < 2.6.13) and use drivers:<br />
*cx88_dvb <br />
*cx8802 <br />
*cx8800 <br />
*cx88_blackbird (connexant ref. design)<br />
|[[http://www.sandbox.de/dvb-t/TerraTec_Cinergy_1400_DVB-T_PCI.jpg]]<br />
|- valign="top"<br />
|[[TerraTec Cinergy HT PCI|Cinergy HT PCI]] <br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T, Analog TV, Radio<br />
|<br />
* '''Tuner''': Thomson [[TT 7579]]<br />
* '''Chipset''': Philips [[Philips_SAA7134|SAA7134]]<br />
* '''Analog Tuner''': tda8290+75<br><br />
* '''Digital Chipset''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Works with Module saa7134 for analog TV and saa7134-dvb for DVB-T<br />
* Drivers from linuxtv.org work fine, no special options needed.<br />
* Has remote included, does not work for me in linux so far.<br />
* PCI subsystem ID: 153b:1175<br />
* Note: There is an unsupported newer revision under the same name, see below.<br />
|<br />
|- valign="top"<br />
| style="white-space:nowrap" | New [[Cinergy HT PCI]]<br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T<br />
|Chipset [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Newer revision of TerraTec Cinergy HT PCI<br />
* PCI subsystem ID: 153b:1177<br />
* DVB-T working with at least 2.6.35 vanilla, cx23885 + zl10353<br />
|<br />
|}<br />
<br />
=== [[TwinHan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]] [http://www.twinhan.com]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[Hama]] [[DVB-T PCI-Karte]]<br />
|[http://www.twinhan.com/product_terrestrial_4.asp]<br />
<br />
|- valign="top"<br />
|[[DTV Ter PCI (A&D)]] [http://www.conrad.de/script/twinhan_dtv_ter.sap]<br />
VP-30540<br />
|ca. 70 €<br />
|Works ok with FC4 latest 2.6 kernel and cx88xx option card=42.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Conexant]] [[Conexant CX2388x|CX23883]]<br />
* [[Philips]] FMD1216ME<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
You will see 4 new PCI-Devices:<br />
* 14f1:8800 Conexant CX23880/1/2/3 PCI Video and Audio Decoder<br />
* 14f1:8801 unknown<br />
* 14f1:8802 unknown<br />
* 14f1:8804 unknown<br />
<br />
The non-DVB-T (analog-tuner) evtl. works running<br />
modprobe cx88xx tuner=63<br />
<br />
EDIT: Got DVB-T to work with option card=42:<br />
<br>cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro<br />
<br>Playback is smooth the earlier comment about Jekryness was due<br />
<br>to not have overlay switched on. <br />
<br>The card even looks like the digitalnow DNTV Live! DVB-T Pro [http://www.digitalnow.com.au/product_pages/DNTV_Pro.html]<br />
|[http://www.mcsat.co.uk/catalog/images/ter-D+A.gif]<br />
|- valign="top"<br />
|[[TwinHan 3506 Hybrid|3506 Hybrid]]<br />
<br />
[http://www.twinhan.com/product_D%2BA_3056_1.asp]<br />
<br />
|~ £25 in UK<br />
|Works ok with FC7 latest 2.6 kernel and saa7134 module, card=109.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
I<sup>2</sup>C gate tuning problem, you'll need to compile the driver with a small change<br />
|<br />
|}<br />
<br />
=== Ultraview ===<br />
* [[DViCO_FusionHDTV_DVB-T1|Ultraview DVB-T Plus]]<br />
<br />
=== [[Yuan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Stratford PG300]] <br />
<br />
[http://www.yuan.com.tw/en/products/vdo/vdo_PG300.html]<br />
|AUD $45<br />
|DVB, VDR possible<br><br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]] [[Conexant CX22702|CX22702-15]] <br />
|<br />
* Antenna in<br />
* IR in<br />
* Antenna Loop out<br />
|<br />
* Remote & IR-receiver included<br />
* DVB Works with "options cx88xx card=43"<br />
* Remote '''Not''' Working<br />
* Includes Low-Profile bracket<br />
|<br />
[http://www.gamedude.com.au/yuan]<br />
|<br />
<br />
|-<br />
| [[Yuan MPC 788 Hybrid Mini-PCI]]<br />
<br />
[http://www.yuan.com.tw/jp/products/tuner/productscontent3.htm]<br />
| $25USD<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive xc3028<br />
* Demod: ZL10353<br />
* Demux: CX23883<br />
|<br />
* Antenna In<br />
<br />
|<br />
* Remote and external antenna included.<br />
* Same components as Winfast DTV1800 card.<br />
* Analog works with "options cx88xx card=81" in "/etc/modprobe.d/video4linux"<br />
* Tested analog with MPlayer.<br />
* Basic testing with Kaffeine. Kaffeine detected the card and scanned for channels, however testing was done in Canada where no DVB-T signal exist.<br />
|<br />
<br />
|}<br />
<br />
== Currently Unsupported DVB-T PCI cards==<br />
{{help to support}}<br />
<br><br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br><br />
<br>Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures''<br />
|- valign="top"<br />
|'''[[Pinnacle]]<br><br />
[[Pinnacle PCTV DVB-T PCI (250i)|PCTV DVB-T PCI (250i)]]''' [http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+(DVB-S_DVB-T)/PCTV+DVB-T+PCI+(250i).htm]<br><br />
<br><br />
~£26 in the UK<br />
|No support yet<br />
|<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/screenshots/PCTV_DVB-T_PCI_persp_midres.jpg]<br />
<br />
|- valign="top"<br />
|'''[[Leadtek]]<br><br />
[[Leadtek WinFast DTV2000DS PLUS|Winfast DTV2000DS PLUS]]''' [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=overview]<br><br />
<br><br />
~$65 AUD<br />
|No support yet<br />
|<br />
* Chipset: [[RealTek RTL2832U]]<br />
* Tuner??<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card.<br />
* Uses VIA onboard PCI-USB bridge and appears as a USB device (ID 0413:6f12)<br />
* Comes with remote control.<br />
|<br />
<br />
|- valign="top"<br />
|'''[[X3M digital S.A. | X3M tv-tuners]]<br><br />
[[x3m digital S.A HPC2000|HPC2000]]'''<br>EUR ~45 (Euro)<br />
|No support yet<br><br />
|<br />
*Chipset: Conexant CX23880<br />
*Multiplexer-Demultiplexer: hcf4052<br />
*Demodulator: ZL10353/WJCE6353 <br />
*Tuner: xc3028 (Xceive)<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
* Supports MPEG-2 and MPEG-4(H264)<br />
* it seems to be a [http://www.geniatech.com/dwonloadf/d_dvbt.htm Geniatech DVB-T TV Hybrid X8000MT]; windows drivers of both cards are the same.<br />
* an open source linux driver, seemingly based on an older checkout of the V4L HG tree, can be found at [http://www.geniatech.com/driver-eng/linux/v4l-dvb-experimental-x8000mt.tar.gz]<br />
* the firmware, which the 2.6.31-rc1 kernel tuner driver does not seem to have a loader for, is located at [http://www.geniatech.com/driver-eng/linux/fw25_linux.tar.gz]<br />
* this geniatech firmware is identical with the X3M firmware provided here[http://www.x3mtv-tuners.de/uploads/media/HPC2000_x86_Linux_Treiber.zip] This supports the notion that those cards are in fact identical<br />
* the xc3028-v27.fw firmware extracted from other Xceive tuner based cards' windows drivers via extract_xc3028.pl does not seem to work on this card<br />
* from skimming the source code of the xc3028 driver(kernel and geniatech) it seems to me that the xc3028-v27.fw firmware is simply a binary compound of the same components(though the length of the chunks seems to differ) that are provided in the geniatech firmware.<br />
|<br />
[[Image:Hpc2000.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|'''[[Compro Technology | Compro]]<br><br />
[[Compro VideoMate DVB-T220|VideoMate DVB-T220]]'''<br />
|No support yet<br><br />
Detects as a T200<br />
|<br />
*Chipset: SAA7130<br />
*COFDM Demodulator: MT352<br />
*Tuner: [[Quantek QT1010]]<br />
|<br />
*Antenna In<br />
*S-Video in<br />
*Remote In<br />
|<br />
* DVB-T Card<br />
* Comes with remote control.<br />
|<br />
[[Image:VideoMate_DVB-T220.JPG|thumb|120px|]]<br />
|}<br />
<br />
<br />
[[Category:DVB-T| ]]<br />
[[Category:DVB-T PCI Cards| ]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31670Leadtek WinFast DTV2000DS2013-02-04T23:59:36Z<p>Michaelp: /* Plus version is unsupported */</p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
===Plus version is unsupported===<br />
<br />
Be warned that the [[Leadtek WinFast DTV2000DS PLUS]] is a different card, and is currently not supported.<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS_PLUS&diff=31669Leadtek WinFast DTV2000DS PLUS2013-02-04T23:57:06Z<p>Michaelp: </p>
<hr />
<div>This is a dual tuner DVB-T PCI card. It uses an onboard VIA PCI-USB bridge so behaves like a USB device, with USB ID 0413:6f12.<br />
<br />
It has the [[RealTek RTL2832U]] chipset, unlike its sibling the [[Leadtek WinFast DTV2000DS]] which has the Afatech AF9015 and AF9013 chipset. Therefore drivers for the non-plus version will certainly not work.<br />
<br />
Note that the official Leadtek product page [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=specification] falsely states that it has the AF9015 and AF9013.<br />
<br />
The card is currently unsupported. It might be possible to get it working with the existing RTL2832U drivers. It may be similar to the [[Mygica T1800B]] PCI card, since they have very similar general specifications.<br />
<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6f12 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6f12<br />
bcdDevice 1.00<br />
iManufacturer 1 Realtek<br />
iProduct 2 WinFast DTV2000 DS Plus<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 25<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 4 USB2.0-Bulk&Iso<br />
bmAttributes 0xa0<br />
(Bus Powered)<br />
Remote Wakeup<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 1<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 255 Vendor Specific Subclass<br />
bInterfaceProtocol 255 Vendor Specific Protocol<br />
iInterface 5 Bulk-In, Interface<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 2<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre></div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS_PLUS&diff=31668Leadtek WinFast DTV2000DS PLUS2013-02-04T23:55:54Z<p>Michaelp: </p>
<hr />
<div>This is a dual tuner DVB-T PCI card. It uses an onboard VIA PCI-USB bridge so behaves like a USB device, with USB ID 0413:6f12.<br />
<br />
It has the [[RealTek RTL2832U]] chipset, unlike its sibling the [[Leadtek WinFast DTV2000DS]] which has the Afatech AF9015 and AF9013 chipset. Therefore drivers for the non-plus version will certainly not work.<br />
<br />
Note that the official Leadtek product page [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=specification] falsely states that it has the AF9015 and AF9013.<br />
<br />
The card is currently unsupported. It might be possible to get it working with the existing RTL2832U drivers. It may be similar to the [[Mygica T1800B]] PCI card, since they have very similar general specifications.<br />
<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6f12 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6f12<br />
bcdDevice 1.00<br />
iManufacturer 1 Realtek<br />
iProduct 2 WinFast DTV2000 DS Plus<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 25<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 4 USB2.0-Bulk&Iso<br />
bmAttributes 0xa0<br />
(Bus Powered)<br />
Remote Wakeup<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 1<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 255 Vendor Specific Subclass<br />
bInterfaceProtocol 255 Vendor Specific Protocol<br />
iInterface 5 Bulk-In, Interface<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 2<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
<\pre></div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31667Leadtek WinFast DTV2000DS2013-02-04T23:51:17Z<p>Michaelp: /* Plus version is unsupported */</p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
===Plus version is unsupported===<br />
<br />
Be warned that the [[Leadtek WinFast DTV2000DS PLUS]] is a different card, and is currently not supported. It is also a PCI card that uses an onboard USB interface, and so appears in lsusb. Its product ID is 0413:6f12. Contrary to what it says on the Leadtek website, it has the [[RealTek RTL2832U]] chipset. It may be a clone of the [[Mygica T1800B]]. It might be possible to get it working under one of the existing RTL2832U drivers.<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS_PLUS&diff=31666Leadtek WinFast DTV2000DS PLUS2013-02-04T23:49:39Z<p>Michaelp: Create page for Leadtek DTV2000DS PLUS</p>
<hr />
<div>This is a dual tuner DVB-T PCI card. However, it uses an onboard VIA PCI-USB bridge so behaves like a USB device, with USB ID 0413:6f12. It has the [[RealTek RTL2832U]] chipset, even though the official Leadtek product page [http://www.leadtek.com/eng/product/6/621/intro.aspx#pitem=specification] claims it has the Afatech AF9015 and AF9013.<br />
<br />
The card is currently unsupported. It might be possible to get it working with the existing RTK2832U drivers. It may be similar to the [[Mygica T1800B]] PCI card, since they have very similar general specifications.<br />
<br />
Output of lsusb -v<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6f12 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6f12<br />
bcdDevice 1.00<br />
iManufacturer 1 Realtek<br />
iProduct 2 WinFast DTV2000 DS Plus<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 25<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 4 USB2.0-Bulk&Iso<br />
bmAttributes 0xa0<br />
(Bus Powered)<br />
Remote Wakeup<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 1<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 255 Vendor Specific Subclass<br />
bInterfaceProtocol 255 Vendor Specific Protocol<br />
iInterface 5 Bulk-In, Interface<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 2<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
<\pre></div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31662Leadtek WinFast DTV2000DS2013-02-02T05:42:08Z<p>Michaelp: /* Plus Version is Different */</p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
===Plus version is unsupported===<br />
<br />
Be warned that the Leadtek DTV2000DS PLUS is a different card, and is currently not supported. It is also a PCI card that uses an onboard USB interface, and so appears in lsusb. Its product ID is 0413:6f12. Contrary to what it says on the Leadtek website, it has the [[RealTek RTL2832U]] chipset. It may be a clone of the [[Mygica T1800B]]. It might be possible to get it working under one of the existing RTL2832U drivers.<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31661Leadtek WinFast DTV2000DS2013-02-02T05:41:09Z<p>Michaelp: /* Plus Version is Different */</p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
===Plus Version is Different===<br />
<br />
Be warned that the Leadtek DTV2000DS PLUS is a different card, and is currently not supported. It is also a PCI card that uses an onboard USB interface, and so appears in lsusb. Its product ID is 0413:6f12. Contrary to what it says on the Leadtek website, it has the [[RealTek RTL2832U]] chipset. It may be a clone of the [[Mygica T1800B]]. It might be possible to get it working under one of the existing RTL2832U drivers.<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31660Leadtek WinFast DTV2000DS2013-02-02T05:38:39Z<p>Michaelp: /* Identification */</p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
===Plus Version is Different===<br />
<br />
Be warned that the Leadtek DTV2000DS PLUS is a different card. It is also a PCI card that uses an onboard USB interface, and so appears in lsusb. Its product ID is 0413:6f12. Contrary to what it says on the Leadtek website, it has the [[RealTek RTL2832U]] chipset. It may be a clone of the [[Mygica T1800B]]. It is currently unsupported, but it might be possible to get it working under one of the existing RTL2832U drivers.<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31659Leadtek WinFast DTV2000DS2013-02-02T05:37:18Z<p>Michaelp: /* Identification */</p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
Be warned that the Leadtek DTV2000DS PLUS is a different card. It is also a PCI card that uses an onboard USB interface, and so appears in lsusb. Its product ID is 0413:6f12. Contrary to what it says on the Leadtek website, it has the [[RealTek RTL2832U]] chipset. It may be a clone of the [[Mygica T1800B]]. It is currently unsupported, but it might be possible to get it working under one of the existing RTL2832U drivers.<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31658Leadtek WinFast DTV2000DS2013-02-02T05:25:08Z<p>Michaelp: /* Identification */</p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
Be warned that the Leadtek DTV2000DS PLUS is a different card. It is also a PCI card that uses an onboard USB interface, and so appears in lsusb. Its product ID is 0413:6f12. Contrary to what it says on the Leadtek website, it has the [[Realtek RTL2832U]] chipset. It may be a clone of the [[Mygica T1800B]]. It is currently unsupported, but it might be possible to get it working under one of the existing RTL2832U drivers.<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=Leadtek_WinFast_DTV2000DS&diff=31657Leadtek WinFast DTV2000DS2013-02-02T05:21:23Z<p>Michaelp: </p>
<hr />
<div>[[Image:Leadtek dtv 2000ds 2s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|240px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|240px]]<br />
<br />
A dual tuner [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Leadtek]].<br />
<br />
Currently supported by recent V4L-DVB (as at Sep 2010) <br />
The card is not working out of the box, however there is a solution (patch to V4L really).<br />
<br />
Your mileage may vary. There are still some issues in using this card; please read on.<br />
<br />
<br />
==Overview/Features==<br />
Formats:<br />
* DVB-T<br />
Inputs:<br />
* RF<br />
* Infrared<br />
<br />
===Components Used===<br />
Contains <br />
* NXP TDA18211<br />
or<br />
* TDA18271HD/C2<br />
<br />
===Identification===<br />
Output of lsusb -v:<br />
<br />
<pre><br />
Bus 002 Device 002: ID 0413:6a04 Leadtek Research, Inc.<br />
Device Descriptor:<br />
bLength 18<br />
bDescriptorType 1<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
idVendor 0x0413 Leadtek Research, Inc.<br />
idProduct 0x6a04<br />
bcdDevice 2.00<br />
iManufacturer 1 Afatech<br />
iProduct 2<br />
iSerial 0<br />
bNumConfigurations 1<br />
Configuration Descriptor:<br />
bLength 9<br />
bDescriptorType 2<br />
wTotalLength 46<br />
bNumInterfaces 1<br />
bConfigurationValue 1<br />
iConfiguration 0<br />
bmAttributes 0x80<br />
(Bus Powered)<br />
MaxPower 500mA<br />
Interface Descriptor:<br />
bLength 9<br />
bDescriptorType 4<br />
bInterfaceNumber 0<br />
bAlternateSetting 0<br />
bNumEndpoints 4<br />
bInterfaceClass 255 Vendor Specific Class<br />
bInterfaceSubClass 0<br />
bInterfaceProtocol 0<br />
iInterface 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x81 EP 1 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x02 EP 2 OUT<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x84 EP 4 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Endpoint Descriptor:<br />
bLength 7<br />
bDescriptorType 5<br />
bEndpointAddress 0x85 EP 5 IN<br />
bmAttributes 2<br />
Transfer Type Bulk<br />
Synch Type None<br />
Usage Type Data<br />
wMaxPacketSize 0x0200 1x 512 bytes<br />
bInterval 0<br />
Device Qualifier (for other device speed):<br />
bLength 10<br />
bDescriptorType 6<br />
bcdUSB 2.00<br />
bDeviceClass 0 (Defined at Interface level)<br />
bDeviceSubClass 0<br />
bDeviceProtocol 0<br />
bMaxPacketSize0 64<br />
bNumConfigurations 1<br />
Device Status: 0x0000<br />
(Bus Powered)<br />
</pre><br />
<br />
Be warned that the Leadtek DTV2000DS PLUS is a different card. It is also a PCI card that uses an onboard USB interface, and so appears in lsusb. Its product ID is 0413:6f12. Contrary to what it says on the Leadtek website, it has the Realtek RTL2832U chipset. It may be a clone of the [[Mygica T1800B]].<br />
<br />
==Making it work in Ubuntu==<br />
<br />
Updated 24 June 2012<br />
<br />
I made a simple GUI which installs Leadtek DTV2000DS, configures the remote control for Mythtv and fixes the missing second tuner.<br />
<br />
https://github.com/map7/tvconfig<br />
<br />
Updated 29 October 2011 by Mrgrrr<br />
<br />
Running Mythbuntu 11.10 the card works on this kernel but need the firmware bellow<br />
sudo apt-get install linux-firmware-nonfree<br />
<br />
In Brisbane I have had odd results with channel 9, first time showing this station fails to lock but after checking other channels it then works.<br />
<br />
Enjoy<br />
<br />
<br />
Updated 14 May 2011 by '''BenWise'''.<br />
<br />
Two channel tuning on this card (at least) now works out of the box on kernel 2.6.38 (taken from Ubuntu PPA). <br />
<br />
I use Mythbuntu 10.04. <br />
<br />
To upgrade Mythbuntu 10.04 to use 2.6.38 kernel:<br />
<code><pre><br />
# get the firmware version 4.95<br />
sudo apt-get install linux-firmware-nonfree<br />
# upgrade kernel to 2.6.38 <br />
sudo add-apt-repository ppa:kernel-ppa/ppa<br />
sudo apt-get update<br />
sudo apt-get install linux-headers-2.6.38-1-generic linux-image-2.6.38-1-generic<br />
</pre></code><br />
<br />
Then shut down your computer (important if you've been trying to load this card already, as the correct firmware will be loaded) and turn it on again... You should have the card operating correctly now.<br />
<br />
I expect this means the card is supported out of the box on 11.04 (as it uses 2.6.38 kernel) but haven't tested this yet.<br />
<br />
----<br />
<br />
Updated 20 Nov 2010 by '''AMX'''.<br />
<br />
Here is a simple HOWTO/Workaround to get this card working . This is based on debian flavours.<br />
Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L. Until then we all have to sweat it a bit!!<br />
<br />
The real solution is based on the bug found in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html . There is another issue that better get fixed and it is to do with I2C byte write numbers.<br />
<br />
Please leave comments in the discussion session or put comments in http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html so that we keep this updated.<br />
<br />
1- Starting from a clean install of 10.04 or 10.10, perform the initial steps to install V4L drivers<br />
<br />
<code><pre>sudo apt-get install mercurial linux-headers-$(uname -r) build-essential</pre></code><br />
<br />
<br />
2- go to http://linuxtv.org/hg/v4l-dvb/rev/abd3aac6644e and click on the "bz2" link and download the file.<br />
<br />
'''Note: Here I am referring to a specific tag of the repository, i.e. abd3aac6644e.'''<br />
'''If you have recent kernels such as 2.6.36, you may need to grab the latest source rather than this particular tag. The rest of the process is still the same.'''<br />
<br />
<br />
3- run <br />
<br />
<code><pre><br />
bzcat v4l-dvb-abd3aac6644e.tar.bz2 | tar xv<br />
cd v4l-dvb-abd3aac6644e<br />
</pre></code><br />
<br />
This should create a directory called v4l-dvb-abd3aac6644e<br />
<br />
4- Do the following modifications<br />
<br />
4.1- The small_i2c fix: This fix is from discussions here http://www.spinics.net/lists/linux-usb/msg37741.html .<br />
<br />
Edit the file linux/drivers/media/dvb/dvb-usb/af9015.c and replace <br />
<br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = 1,<br />
};<br />
</pre></code><br />
<br />
with <br />
<code><pre><br />
static struct tda18271_config af9015_tda18271_config = {<br />
.gate = TDA18271_GATE_DIGITAL,<br />
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,<br />
};<br />
</pre></code><br />
<br />
Then edit the file linux/drivers/media/common/tuners/tda18271.h<br />
<br />
and replace <br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 1,<br />
TDA18271_08_BYTE_CHUNK_INIT = 2,<br />
<br />
};<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
enum tda18271_small_i2c {<br />
TDA18271_39_BYTE_CHUNK_INIT = 0,<br />
TDA18271_16_BYTE_CHUNK_INIT = 16,<br />
TDA18271_08_BYTE_CHUNK_INIT = 8,<br />
TDA18271_03_BYTE_CHUNK_INIT = 3,<br />
};<br />
</pre></code><br />
<br />
<br />
4.2- The main and the nasty bug i.e. the if_sample_freq bug: This fix is from http://www.xpmediacentre.com.au/community/tuners/41937-leadtek-dtv2000ds-4.html .<br />
If you have a quick look inside the file (just out of interest), you will notice that how this bug was messing up all the tuner frequency calculations. The frequencies are given in Table 41 in the datasheet (http://www.nxp.com/documents/data_sheet/TDA18211HD.pdf)<br />
<br />
Anyway<br />
<br />
edit the file linux/drivers/media/dvb/frontends/af9013.c<br />
<br />
and replace<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3800000; /* 3.8 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4300000; /* 4.3 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
with<br />
<br />
<code><pre><br />
/* TDA18271 uses different sampling freq for every bw */<br />
if (state->config.tuner == AF9013_TUNER_TDA18271) {<br />
switch (bw) {<br />
case BANDWIDTH_6_MHZ:<br />
if_sample_freq = 3300000; /* 3.3 MHz */<br />
break;<br />
case BANDWIDTH_7_MHZ:<br />
if_sample_freq = 3500000; /* 3.5 MHz */<br />
break;<br />
case BANDWIDTH_8_MHZ:<br />
default:<br />
if_sample_freq = 4000000; /* 4.0 MHz */<br />
break;<br />
}<br />
}<br />
</pre></code><br />
<br />
<br />
5- Compile and install the drivers<br />
<br />
make sure you are back in the v4l-dvb-abd3aac6644e directory<br />
<br />
<code><pre><br />
make config<br />
sed -i -e "s/FIREDTV=m/FIREDTV=n/" v4l/.config<br />
make<br />
sudo make install<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
sudo cp dvb-usb-af9015.fw /lib/firmware<br />
</pre></code><br />
<br />
6- Shutdown (you have to shutdown)<br />
<br />
7- Startup<br />
<br />
8- Hopefully now your tuner is recognized and works happily. If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum.<br />
<br />
<br />
===Fix for the 5.1 Firmware ===<br />
[Comments added by Ross] <br />
As per the notes added by Cloggy below the 5.1 firmware causes issues if you just follow the guide above. However there is a patch missing which enables support :)<br />
This is based on the following commit: http://linuxtv.org/hg/~anttip/af9015/rev/6904cb7bd11d<br />
<br />
Replace linux/drivers/media/dvb/frontends/af9013_priv.h with the following file:<br />
<br />
http://linuxtv.org/hg/~anttip/af9015/raw-file/6904cb7bd11d/linux/drivers/media/dvb/frontends/af9013_priv.h<br />
<br />
===Frequent lockups during live TV and recording of TV shows===<br />
[Comments added by Cloggy - based on Mythbuntu 10.10] <br />
Using the firmware mentioned above (5.1.0.0) on my system resulted in frequent lockups during recording or watching live TV. Mythbackend.log has entries "Poll giving up", "Device error detected" and "Stream handler died unexpectedly".<br />
The previous firmware version is more stable. To use the previous version replace the "wget" line in step 5 with:<br />
<br />
wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw<br />
<br />
Remember to do a cold boot afterwards to activate this firmware, /var/log/messages should show "af9013: firmware version:4.95.0"<br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24]<br />
<br />
Firmware 5.1.0.0 works fine after using fix mentioned by Ross. Still only 1 tuner working. Second tuner only works on rare occassions.<br />
<br />
===Losing 1 tuner===<br />
[Comments added by Cloggy - 30 Jun 2011 - based on Mythbuntu 11.04]<br />
I noticed that the second tuner would only work after a cold boot. After a while it would lose that tuner and the only way to get it to work again was to cold boot. This seems to be caused by power management on the USB bus. Even though it's a PCI card, it actually contains a VIA USB chip that the AF901* are connected to. Disabling the power management on the USB bus fixed this problem. Similar problem is described here for a Haupage card:<br />
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Losing_one_tuner.3F<br />
<br />
I fixed mine by adding this to /etc/init.d/rc.local:<br />
<code><pre><br />
# Turn off USB power management to keep both DVB tuners running<br />
echo -n -1 > /sys/module/usbcore/parameters/autosuspend<br />
</pre></code><br />
<br />
[Comments added by Cloggy - 08 Sep 2012 - based on Mythbuntu 11.04]<br />
Even with the USB power management fix the problem of losing the second tuner still persisted albeit less often. Curiously, the power supply in my machine failed (a Dell OptiPlex 520 - Small Form Factor) and I connected the machine up to a bigger power supply from another machine. The second tuner has been fine for 4 weeks now without a single reboot.<br />
<br />
<br />
===Cold Boots===<br />
ATX power supplies when switched off still supply 5V to the motherboard which will keep various components and USB devices powered up so that functions like Wake on LAN can work. The 2000DS is a USB based device with a pair of USB tuners connected to the VIA USB->PCI bus interface chip. Power cycling by using the power button isn't enough in some cases to bring the malfunctioning 2000DS to a true cold boot state. To do a true cold boot (to replicate the act of pulling out a USB device) make sure the mains power cord is removed - some PSUs have a rocker switch that will do the same job - and wait about 10-20 seconds for the 5V bus to shut down completely before reapplying power. This was the only way I could get a pair of recently unresponsive 2000DS cards to start working again - the ATX power button cycling wasn't enough.<br />
<br />
===Remote Control Support===<br />
I ([[User:Gregoryo|Gregoryo]]) have had no success with the remote, but there is hope from dmesg:<br />
<pre>[ 22.263721] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5</pre><br />
<br />
<code><pre>user@host:~$ cat /proc/bus/input/devices<br />
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200<br />
N: Name="IR-receiver inside an USB DVB receiver"<br />
P: Phys=usb-0000:02:0a.2-1/ir0<br />
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5<br />
U: Uniq=<br />
H: Handlers=kbd event5<br />
B: EV=3<br />
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe<br />
</pre></code><br />
<br />
So I've been using /dev/input/event5 in my tests. I have tried using evtest, mode2, and irw to no avail. I get no indication of any signal coming from the remote. Am I missing a kernel driver module?<br />
<br />
===Remote Control Support (2)===<br />
[Comments added by Cloggy - 23 May 2011 - update based on Mythbuntu 11.04 / Myth 0.24]<br />
The tuner card itself works fine out of the box, you just have to copy the firmware file to the correct directory:<br />
<pre>cd /lib/firmware<br />
sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw<br />
</pre><br />
<br />
However, I spent two weeks trying to get the remote control (Y04G0051) to work with the new kernel 2.6.38 and it's been a frustrating experience. The remote control emulates a keyboard but it very often generates more keypresses than what was put in. For example, you press CANCEL twice but the driver recognises three key presses so you end up in menu screens you didn't intend. Playing around with the delay and repeat settings didn't make any difference. I've also experimented with inputlirc but this didn't resolve my problem. A friend donated a Chinese made MCE remote control (what used to be sold in Australia as a Jaycar MCE remote control) and it's been fantastic! It emulates a keyboard so no LIRC required. Only problem with it is that some keys generate Shift+<some key> codes and MythTV doesn't differentiate between upper and lower case so you just have to remap some keys. All is described here:<br />
<br />
http://www.mythtv.org/wiki/Generic_HID_%22MCE%22_Remotes<br />
<br />
To get you started, here my ~/.Xmodmap<br />
<pre><br />
keycode 22 = Escape Escape Escape Escape<br />
keycode 27 = R R R R<br />
keycode 39 = S S S S<br />
keycode 33 = p P P F13<br />
keycode 56 = B F14 B F14<br />
keycode 41 = F F15 F F15<br />
keycode 28 = t T t F16<br />
keycode 58 = F17 F17 F17 F17<br />
keycode 52 = Z Z Z Z<br />
keycode 38 = A A A A<br />
</pre><br />
<br />
[Comments added by Cloggy - 14 Mar 2011 - based on Mythbuntu 10.10 / Myth 0.24] <br />
Here my config files to get the remote control (part number y04g0051) working:<br />
<br />
/etc/udev/rules.d/20-mythtv.rules:<br />
<pre># /etc/udev/rules.d/20-mythtv.rules<br />
<br />
# Leadtek DTV2000DS Remote Control<br />
KERNELS=="2-1",ATTRS{idVendor}=="0413",ATTRS{idProduct}=="6a04",SYMLINK+="input/dtv2000ds_remote"<br />
</pre><br />
<br />
/etc/lirc/hardware.conf:<br />
<pre># /etc/lirc/hardware.conf<br />
<br />
REMOTE="Leadtek dtv2000ds y04g0051"<br />
REMOTE_MODULES=""<br />
REMOTE_DRIVER="devinput"<br />
REMOTE_DEVICE="/dev/input/dtv2000ds_remote"<br />
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf"<br />
REMOTE_LIRCD_ARGS=""<br />
<br />
#Chosen IR Transmitter<br />
TRANSMITTER="None"<br />
TRANSMITTER_MODULES=""<br />
TRANSMITTER_DRIVER=""<br />
TRANSMITTER_DEVICE=""<br />
TRANSMITTER_LIRCD_CONF=""<br />
TRANSMITTER_LIRCD_ARGS=""<br />
<br />
#Enable lircd<br />
START_LIRCD="true"<br />
<br />
#Don't start lircmd even if there seems to be a good config file<br />
#START_LIRCMD="false"<br />
<br />
#Try to load appropriate kernel modules<br />
LOAD_MODULES="true"<br />
<br />
# Default configuration files for your hardware if any<br />
LIRCMD_CONF=""<br />
<br />
#Forcing noninteractive reconfiguration<br />
#If lirc is to be reconfigured by an external application<br />
#that doesn't have a debconf frontend available, the noninteractive<br />
#frontend can be invoked and set to parse REMOTE and TRANSMITTER<br />
#It will then populate all other variables without any user input<br />
#If you would like to configure lirc via standard methods, be sure<br />
#to leave this set to "false"<br />
FORCE_NONINTERACTIVE_RECONFIGURATION="true"<br />
START_LIRCMD="true"<br />
</pre><br />
<br />
/etc/lirc/lircd.conf:<br />
<pre># /etc/lirc/lircd.conf<br />
# brand: Leadtek<br />
# model no. of remote control: Y04G0051<br />
# devices being controlled by this remote: DTV2000DS<br />
<br />
begin remote<br />
name Y04G0051<br />
bits 16<br />
eps 30<br />
aeps 100<br />
one 0 0<br />
zero 0 0<br />
gap 263992<br />
pre_data_bits 16<br />
pre_data 0x8001<br />
<br />
begin codes<br />
POWER 0x0164<br />
TV 0x0179<br />
PREVIOUS 0x00A8<br />
PLAYPAUSE 0x00CF<br />
NEXT 0x00D0<br />
CLOCK 0x0167<br />
BACK 0x019C<br />
STOP 0x0080<br />
FORWARD 0x0197<br />
RECORD 0x00A7<br />
ZERO 0X000B<br />
ONE 0x0002<br />
TWO 0x0003<br />
THREE 0x0004<br />
FOUR 0x0005<br />
FIVE 0x0006<br />
SIX 0x0007<br />
SEVEN 0x0008<br />
EIGHT 0x0009<br />
NINE 0x000A<br />
EPG 0x016D<br />
FULLSCREEN 0x0177<br />
RECALL 0x0081<br />
DOT 0x0034<br />
OKINFO 0x0160<br />
SNAPSHOT 0x00D4<br />
MENU 0X008B<br />
EXIT 0x0080<br />
MUTE 0x0071<br />
SLEEP 0x008E<br />
UP 0X0067<br />
DOWN 0x006C<br />
LEFT 0x0069<br />
RIGHT 0x006A<br />
OK 0X0160<br />
VOL+ 0x0073<br />
VOL- 0x0072<br />
CH+ 0x0192<br />
CH- 0X0193<br />
AUDIO 0x0188<br />
VIDEO 0x0189<br />
RED 0x018E<br />
GREEN 0X018F<br />
YELLOW 0x0190<br />
BLUE 0x0191<br />
TELETEXT 0x0184<br />
UNKNOWN1 0X016B<br />
PIP 0x00B5<br />
DELETE 0x0001<br />
end codes<br />
end remote<br />
</pre><br />
<br />
==External Links==<br />
* [http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530 Leadtek product page]<br />
[[Category:DVB-T PCI Cards]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=DVB-T_PCI_cards&diff=31656DVB-T PCI cards2013-02-02T05:11:07Z<p>Michaelp: /* Leadtek */</p>
<hr />
<div>On this page you will find information regarding [[DVB-T]] [[PCI]] cards.<br />
<br />
{{non-exhaustive list}}<br />
<br><br />
==Supported DVB-T PCI Cards==<br />
The following table lists the confirmed working DVB-T PCI cards and provides a brief summary of their features and components. If you need more technical information on a device, have a look at its specific wiki article. <br />
<br />
=== [[ASUS]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Type'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[ASUS My Cinema-P7131 Hybrid|My Cinema-P7131 Dual]]<br />
<br />
[[Image:ASUS-MyCinema-P7131-Dual-box.jpg|thumb|120px]]<br />
|DVB-T + Analog [http://uk.asus.com/products.aspx?l1=18&l2=83&l3=252&l4=0&model=547&modelmenu=1]<br />
|ca. 45 €<br />
|DVB, VDR<br />
| <br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* DVB-T/FM in<br />
* Analog TV in<br />
* IR in<br />
* AV in (with cable to composite, S-video and audio)<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* With Low-Profile bracket<br />
* Supports FM-radio<br />
* Needs firmware (dvb-fe-tda10046.fw); see the [[ASUS My Cinema-P7131 Hybrid|P7131 article]]<br />
- Following the above article works under Ubuntu 7.10 (Gutsy Gibbon) using Kaffeine 0.8.5 (running the Xine Player Engine ewith the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package)<br />
|[http://www.bttv-gallery.de/HPIM2609.JPG_asus_tiger_302_a.jpg]<br />
[[Image:ASUS-MyCinema-P7131-Dual.jpg|thumb|50px]]<br />
[[Image:ASUS-MyCinema-P7131-Dual-rear.jpg|thumb|50px]]<br />
|}<br />
<br />
=== [[AVerMedia]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T (A761) | AVerTV DVB-T (A761)]]<br />
<br />
<strike>[http://www.avermedia.de/Products/TV_Tuner/DVB-T/main.htm]</strike><br />
<br />
oldest AVerTV DVB-T model<br />
|ca. 90 €<br />
|DVB, VDR<br />
<br />
[http://www.vaslet.de]<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
* S-Video in<br />
* Composite in<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* Low-Profile-Card<br />
* Difference compared to 771 is the Tuner and Composite-in<br />
|<strike>[http://www.avermedia.de/Products/images/Products/DVB-T_FB.jpg]</strike><br />
[http://www.vaslet.de/content/dvbt/averdvb_a761_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_761.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 771 (A771) | AVerTV DVB-T 771 (A771)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt771.asp?show=1]<br />
|ca. 90 €<br />
|DVB, VDR possible<br />
<br />
[http://www.gossamer-threads.com/lists/mythtv/users/72584] [http://www.frokaschwei.net/avtv771/avermedia.html], [http://www.mail-archive.com/linux-dvb@linuxtv.org/msg17579.html] [http://www.vaslet.de]<br />
<br />
Warning some people experience problems with this card search for mt352_read_register on the mailing list.<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-rerceiver included<br />
* Low-Profile-Card<br />
* Difference to the older "761" is the Tuner and the missing Composite-in<br />
|<strike>[http://www.avermedia.de/Products/TV_Tuner/dvbt771/771.jpg]</strike> [http://www.vaslet.de/content/dvbt/averdvb_a771_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_771.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16AR) | AVerTV DVB-T 777 (A16AR)]]<br />
<br />
newest model of the AVerTV DVB-T<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. 65 €<br />
|DVB, VDR ab 2.6.17-rc1<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-receiver included (v4l-dvb needs a patch to properly work)<br />
* Works on Ubuntu 6.10 "almost" out of the box.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:Avermedia777.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16A-C)| AVerTV DVB-T 777 (A16A-C)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. ? €<br />
|DVB<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Tested on 32bit Fedora 9.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:AVER777A16A-C_front.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV Hybrid+FM PCI (A16D)| AVerTV Hybrid+FM PCI (A16D)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI(A16D).asp?show=1#]<br />
|ca. 80 €<br />
| Analogue, kernel 2.6.26; <br />
DVB-T, kernel 2.6.27<br />
<br />
For DVB and experimental support, see [http://mcentral.de/wiki/index.php5/AVerMedia_AverTV_Hybrid_FM_PCI_A16D here], and maybe [http://mcentral.de/wiki/index.php5/AverMedia_Cardbus_Hybrid_TV_FM_E506R here]<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Xceive]] [[Xceive XC3018|XC3018]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|[http://www.avermedia.com/docs/productimage/AVerTV-Hybrid+FM-PCI-b.jpg]<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[AVerMedia AVerTV Hybrid+FM PCI (A16AR)| AVerTV Hybrid+FM PCI (A16AR)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI.asp?show=1]<br />
|<br />
| Yes<br />
FM radio not supported<br />
|<br />
* Philips TD1316A (tuner)<br />
* Philips TDA9887 (analog demodulator)<br />
* Philips SAA7135HL (A/V decoder)<br />
* Zarlink MT352 (DVB-T demodulator)<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|<br />
<br />
|- valign="top"<br />
|[[AVerMedia_AVerTV_DVB-T_Super_007 | AVerTV DVB-T Super 007]]<br />
<br />
[http://www.avermedia.com/EN/Default.aspx?TYPE=vipplayercard.htm&PT=product&tv_TCAT_POS=0&PID=4710710671877]<br />
|ca. 60 €<br />
| Yes (with [http://lists.zerezo.com/video4linux/msg19205.html patch])<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* DVB-T / Analog<br />
* Remote and Infra-red-receiver included<br />
* (this is "Hybrid Super 007" with Analog+DVB-T or "DVB-T Super 007" with only DVB-T?)<br />
|<br />
[[Image:Super_007_box.jpg|thumb|50px|]]<br />
[[Image:Super_007_card.jpg|thumb|50px|]]<br />
|<br />
<br />
*<br />
* DVB-T DUAL LV32TDLX<br />
|}<br />
<br />
=== [[ChainTech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[DTT 1000 PCI]]<br />
<br />
<strike>[http://www.chaintech.com.tw/tw/eng/product_spec.asp?MPSNo=15&PISNo=170]</strike><br />
|ca. 100 €<br />
|DVB, VDR<br> (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Hangs at least older kernels (<2.6.12) unless the bttv module is loaded with parameters "i2c_hw=1 card=0x71". This may cause boot problems when the module is automatically loaded by hotplug.<br />
|<strike>[http://www.chaintech.com.tw/tw/images/Products/DMPD/DTT1000_L.jpg]</strike><br />
|}<br />
<br />
=== [[Club 3D]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[ZAP-TV2202]]<br />
<br />
[http://www.club3d.nl/index.php/products/zaptv/item/11]<br />
<br />
[http://www.club3d.nl/support/manuals/zap-tv/2202/ZAPTV2202_QuickGuide.pdf Manual]<br />
|ca. 67 €<br />
|DVB, Analogue<br />
| Philips [[Philips SAA7131|SAA7131]]<br />
|<br />
* Antenna In<br><br />
* Radio In<br><br />
* S-Video In In<br><br />
|<br />
* Shows up as device 169d:3306<br />
* Installed with command modprobe saa7134 card=94<br />
|<br />
|}<br />
<br />
=== [[Compro Technology|Compro]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[Compro VideoMate T200|VideoMate DVB-T200]]<br />
[http://www.comprousa.com/New/en/product/vmt200.html]<br />
|ca. 37 €<br />
|DVB kernel 2.6.17<br />
| Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br><br />
* S-Video In<br><br />
* Composite In<br><br />
|<br />
* Remote and Infra-red-receiver included <br />
(to get the irda working correctly you may find this mail useful [http://marc.theaimsgroup.com/?l=linux-video&m=113672404400380&w=2] )<br />
* HDTV *(1080i / 720P) ready<br />
* Power on via irda<br />
* warning: problems with poor reception: [http://cvs.mythtv.org/trac/ticket/2664]<br />
|<br />
|}<br />
<br />
=== [[DViCO]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[FusionHDTV Dual Digital 4]]<br />
<br />
[http://www.fusionhdtv.co.kr/ENG/products/DVBTdual4.aspx]<br />
|<br />
* DVB, VDR<br />
* <strike>works with [http://fremnet.net/article/228/dvico-fusionhdtv-dual-digital-4-under-linux patches] - (non Australian users should ignore the dd4.au.patch patch and not use the xc3028.au2.fw firmware).</strike> See https://help.ubuntu.com/community/DViCO_Dual_Digital_4<br />
Revision 2 of this card has just been released ([http://mandmservices.com.au/dvico image]). The new card uses a DIBCOM tuner and modulator <strike>and does not work under the current driver.</strike><br />
<br><br />
The linuxTV drivers are now updated, the revision two works beautifully. The changes do not yet seem to be merged with the Linux kernel (2.6.27), the link above should help you install the drivers. The Rev 2 card may not work properly with older kernels such as 2.6.22 (AMD 780G chipsets, USB disconnects), even using the latest linuxTV drivers. The following link also has some useful information: http://ubuntuforums.org/showthread.php?t=616103 <br />
|Rev 1- Zarlink ZL10353<br />
Rev 2- Dibcom 7070pb1 tuner, CY7C68013A USB peripheral controller, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna in<br />
* IR In<br />
|<br />
* Dual DVB-T tuner card<br />
* Supports HD streams<br />
* <strike>Requires patching</strike><br />
* Is actually two USB devices attached though a Via PCI-to-USB bridge<br />
* Uses <tt>dvb-usb-cxusb</tt> module<br />
* Rev 2 uses <tt>dib0070, dib7000p, dib7000m, dib3000mc, dibx000_common</tt> modules<br />
* Includes low-profile PCI bracket<br />
|<br />
[[Image:DViCO_FusionHDTV_Dual_Digital_4.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|<br />
FusionHDTV Dual Digital 2<br />
|<br />
* DVB-T<br />
| <br />
* CX23880<br />
|<br />
* Antenna In<br />
* IR In<br />
* S-Video In<br />
* USB Type-B connector<br />
|<br />
* Dual PCI/USB device - has a loopback cable<br />
* Works out of the box in Ubuntu 10.04 (and earlier versions)<br />
* Low-Profile<br />
|<br />
(No Picture)<br />
|}<br />
<br />
* [[DViCO FusionHDTV DVB-T1]]<br />
* [[DViCO FusionHDTV DVB-T Lite]]<br />
<br><br />
<br />
=== [[GDI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[GDI Black Gold]]<br />
<br />
[http://www.blackgold.tv/products/digital.htm]<br />
|<br />
|S-Video support works (Small patch which is now in CVS). DVB doesn't work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]]/Front End CX22702/Tuner Philips TU1216/[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]] demodulator<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
|Like this, but slightly longer with a heat sink. <br><br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_Plan.jpg Card]<br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_End.jpg Connectors]<br />
|}<br />
<br />
=== [[Geniatech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech X8000-MT|X8000-MT]]<br />
<br />
[http://www.geniatech.com/pa/x8000t.asp]<br />
| 45 €<br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23883]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 <br><br />
Identical board to [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[[Image:X8000T-DVBT-PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Hama]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[DVB-T PCI-Karte]]<br />
<br />
<strike>[http://www.hama.de/portal/articleId*110877/action*2563/searchMode*1/bySearch*dvb-t]</strike><br />
|ca. 80 €<br />
|DVB, VDR possible<br><br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|[[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[TwinHan]] [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]]<br />
|[http://www.hama.de/bilder/00049/abb/00049019abb.jpg]<br />
|}<br />
<br />
=== [[Hauppauge]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|Old [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(until 06/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* '''Since 07/2004 Hauppauge have been shipping a new Nova-T (see below)'''<br />
* Comes with remote<br />
[[Image:Hauppauge_nova-t_remote.jpg|thumb|30px|]]<br />
|[[Image:Hauppauge_nova-t_old.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|New [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(since 07/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|ca. 100 €<br />
|Works with patches from [http://dl.bytesex.org/patches/] or >= kernel 2.6.12<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* Remote In<br />
|<br />
* Drivers included in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* Comes with same remote as the older model<br />
|[http://sulu.sohanet.de/tmp/]<br />
[[Image:Hauppauge_nova-t_juli2004.jpg|thumb|50px|]]<br />
[[Image:Hauppauge_nova-t_juli2004_Packung.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge WinTV-NOVA-T-500|WinTV-NOVA-T-500]]<br />
<br />
(since 09/2006) [http://www.hauppauge.co.uk/pages/products/data_novat500.html]<br />
|ca. 100 €<br />
|works with v4l-dvb hg from 2006-09-20 [http://www.linuxtv.org/repo/] or kernel >= 2.6.19 - <br />
|[[DiBcom]] [[DiBcom DiB7xxx|DiB0700]]<br />
|<br />
* Antenna In<br />
* Remote In (should now be working)<br />
|<br />
*Dual DVB-T tuner card.<br />
*As of 28/08/2008, according to Michael Krufky, all currently released versions, including the Diversity model, are supported by head of v4l-dvb hg, and the driver is likely to stay ahead of new card releases in the future.<br />
*PCI 2.2 card using 3.3V. Failed to run on PCI 2.1 system.<br />
|<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1300|WinTV-HVR-1300]] (since 07/2005)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1300.html]<br />
(HVR-1100 is similiar to HVR-1300, but without MPEG hardware encoder)<br />
|ca. 130 €<br />
|Digital & Analogue working in repository [http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=3e90edbf7c53584f109fe091d7380e8bda9fa282;style=gitweb]. Encoder support being worked on.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* DVB support in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* This card has tuning problems in MythTV and Kaffeine (works with tzap). See the card page.<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|[http://sulu.sohanet.de/tmp/][[Image:100 7999.JPG|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1110|WinTV-HVR-1110]] (since 09/2006)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1110 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10046 chipset)<br />
|ca. 70 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported with the latest 2.6.18 kernel, need latest v4l-dvb (mercurial) to work on older kernels. See [http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_Mercurial].<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1120|WinTV-HVR-1120]] (since 05/2009)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1120 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10048 chipset)<br />
|ca. 50 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported since kernel 2.6.31. <br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-3000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr3000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hvr3000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hvr3000.jpg|thumb|50px|]]<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-4000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr4000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, DVB-S2 and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|50px|]]<br />
<br />
|}<br />
=== [[Jactek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech JH-600|JH-600]]<br />
<br />
[http://www.jactek.com.tw/product_pctv/product_jh600.html]<br />
| <br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-2388x]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Identical board to [[Geniatech X8000-MT|X8000-MT]], [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[http://www.jactek.com.tw/product_pctv/images/product_jh600_34.jpg]<br />
|}<br />
<br />
=== [[KNC1]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[KNC1 TV-Station DVB-T | TV-Station DVB-T]] <br />
<br />
[http://www.kncone.de/d/produkte/digital_dvb_t.htm]<br />
<br />
|ca. 80 €<br />
|DVB, ? <br />
|Philips [[Philips SAA7146|SAA7146]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* [[Common Interface]]<br />
| <br />
|<br />
|}<br />
<br />
=== [[KWorld]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[KWorld_V-Stream_Xpert_DVB-T_PCI|V-Stream Xpert DVB-T PCI]] <br />
<br />
[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.html]<br />
|ca. 80 €<br />
|DVB, VDR possible [http:///www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00716.html] New card:[http://www.manenti.org/blog/archives/000089.html]<br />
Full support :[[http://linuxtv.org/wiki/index.php/KWorld_V-Stream_Xpert_DVB-T_%28tuner_THOMSON_DTT_7579%29]]<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite In<br />
* Remote In<br />
|<br />
* Remote & IR-receiver included<br />
* There are three versions of this card, one with a Samsung tuner similar to the AVerMedia 771, another with a Thomson tuner (similar to the Nova-T 90002) and another with Thomson tuner DTT 7579. All versions are supported. <br />
|[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.jpg]<br />
|- valign="top"<br />
|[[KWorld DVB-T 220 | DVB-T 220]]<br />
<br />
[http://www.kworld.com.tw/en/kworld/body/Products/D+A/DVB-T220.htm]<br />
|<br />
|DVB, analogue<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In (two)<br />
* FM In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe saa7134-dvb' to enable DVB.<br />
| <br />
[[Image:kworld_DVB-T220.jpg|thumb|120px]]<br />
<br />
|- valign="top"<br />
|[[KWorld_DVBT-100 | DVBT-100]]<br />
<br />
[http://www.kworld.com.tw/en/index_digital.htm]<br />
|<br />
|DVB, analogue<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite video In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe cx88-dvb' to enable DVB. Suspected same card as KWorld_V-Stream_Xpert_DVB-T_PCI. <br />
|<br />
<br />
|- valign="top"<br />
|[[KWorld DVB-T PC160-2T | DVB-T PC160-2T ]]<br />
<br />
[http://www.kworld.com.tw/product_overview.aspx?P_ID=215]<br />
|<br />
| '''NOTE: This card is IDENTICAL to Leadtek DTV2000DS, except for the USB ID, the remote, and the sticky label on the tuners!'''<br />
So please refer to DTV2000DS for extra info.<br />
Dual DVB-T tuners, also known as PEAK DVB-T Dual tuner PCI (221544AGPK)<br />
Working as single tuner card (at least) on 2008-06-05<br />
http://linuxtv.org/hg/~anttip/af9015-mxl500x-copy-fw/<br />
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files<br />
Ref http://marc.info/?l=linux-dvb&m=121268349100641&w=2<br />
A single tuner variant (PC-160-T) is now also supported.<br />
|[[Afatech AF9015|AF9015]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Note that curent kernel versions do not have a keymap for the provided remote, see here for some info about setting up a custom keymap: http://francisfisher.me.uk/problem/2012/kworld-pc160-2t-remote-control-on-ubuntu-linux-11-10-2/<br />
* From my experience, the latest driver (23/03/12) has some bugs that require daily hard resets of the device.<br />
* KWorld support are not interested in providing any assistance getting the device working: "Sorry,we can't help you to solve the remote problem in Linux,since we don't highlight/mention that it can support this system. If you have the problem in Windows system,we are willing to help you solve it."<br />
| <br />
[[Image:Kworld pc160.jpg|thumb|120px]]<br />
<br />
<br />
|}<br />
<br />
=== [[Leadtek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 S|WinFast DTV1000 S]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=382&check=f]<br />
|<br />
| DVB<br />
| [[Chipset NXP 18271 + 10048 + 7130]]<br />
|<br />
* TV Antenna In<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Drivers will be included in 2.6.33 Kernel. Meanwhile can be downloaded http://kernellabs.com/hg/~mkrufky/dtv1000s<br />
* The tuner works with Mythbuntu 9.10 as does remote.<br />
| <br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 T|WinFast DTV1000 T]]<br />
[http://www.leadtek.com.tw/eng/tv_tuner/overview.asp?lineid=6&pronameid=220]<br />
|<br />
| DVB<br />
| [[Conexant Systems, Inc.|Conexant]] based system see [[LR6650]]<br />
|<br />
* TV Antenna In<br />
* TV antenna out (loop through)<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Since kernel 2.6.15-rc1<br />
* The tuner works with Mythbuntu 7.10 (i386) but the remote doesn't.<br />
* In Australia, this card appears to have been superseded by the DTV 1000 S which uses a different chipset and apparently is not supported.<br />
| [http://www.leadtek.com.tw/eng/tv_tuner/image/winfast_dvt1000t_2.jpg]<br />
<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H]]<br />
| $AUD 80<br />
| DVB<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 6-pin for video in<br />
|<br />
* DVB-T works with Ubuntu 7.10 (i386), Kaffeine 0.8.5 and the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package<br />
* FM tuner is not found, no radio function<br />
|<br />
<br />
|-<br />
| [[Leadtek WinFast DTV1800 H|WinFast DTV1800 H]]<br />
| $AUD 75<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 (on latest cards on sale in Aus), earlier cards had Xceive xc3028<br />
* Demod:ZL10353<br />
* Demux:CX23883<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
* Comes with remote control<br />
|<br />
* Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html]. Tested with Kaffeine and Australian DVB-T Broadcasts.<br />
* IRC works but default key mapping is incorrect with KDE4 - needs work.<br />
|[http://dev.gentoo.org/~dragonheart/winfast/_MG_1893.JPG]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000DS|WinFast DTV2000DS]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530]<br />
| $AUD 65<br />
| DVB-T<br />
|<br />
* '''Tuner''': '''NXP TDA18211, but detected as TDA18271 by V4L drivers'''<br />
* '''Chipset''': AF9015 + AF9013<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x ph jack for IR sensor<br />
|<br />
* Dual DVB-T tuner card<br />
'''* Read the page regarding the working status of this card.'''<br />
* Supports HD streams<br />
* Is actually two USB devices attached though a VIA VT6210L PCI-to-USB bridge<br />
* Uses dvb_usb_af9015 and af9013 modules<br />
* Includes low-profile PCI bracket<br />
* Includes remote and Infra-Red sensor<br />
* Warning: The DTV2000DS '''PLUS''' is a completely different card and is unsupported. <br />
| [[Image:Leadtek dtv 2000ds 2s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|50px]]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H rev J]]<br />
| $AUD 75<br />
| DVB Analog Hybrid<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX23881|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* 1 x 4 pin audio output connector (internal CD audio type)<br />
|<br />
* Random success with analog OR DVB-T video no sound<br />
* See: [http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H]:<br />
* Add "cx88-dvb" to /etc/modules<br />
* Add "options cx88xx card=51" to /etc/modprobe.d/options<br />
* Add "options cx88xx card=51,51" to /etc/modprobe.d/options if using two cards<br />
* Try adding "options cx88-alsa index=1,2" to /etc/modprobe.d/options and use /dev/dsp in MythTV Frontend if having sound issues in MythTV<br />
* DTV + audio worked out of box in Mythbuntu 8.10 and Ubuntu 8.10. <br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H Plus|WinFast DTV2000 H Plus]]<br />
| $AUD 100<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 on older cards (eg 107d:6f42), Xceive XC3028 on newer cards (eg 107d:6f44)<br />
* Demod:ZL10353<br />
* Demux:CX2388x<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* Comes with remote control<br />
|<br />
* 107d:6f42: Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html].<br />
* 107d:6f44: DVB-T works with "options cx88xx card=81" (using the vanilla v4l) in /etc/modprobe.d/video4linux but none of the other inputs work. Analog works with "options cx88xx card=51" but DVB-T doesn't, even when tuner=71 is specified.<br />
|<br />
<br />
|}<br />
<br />
=== [[LifeView]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T|FlyDVB-T]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt.htm]<br />
|<br />
|DVB-T only<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Composite in<br />
* Remote In<br />
|<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR301.jpg|thumb|85px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Duo|FlyDVB-T Duo]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_duo.htm]<br />
|<br />
|DVB-T and Analog<br />
|Philips [[SAA7133]]<br />
|<br />
* Cable/Antenna In (two)<br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR306.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|[[LifeView FlyDVB Trio| FlyDVB Trio]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvb_trio.htm]<br />
|<br />
|DVB-T, Satellite and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Satellite Antenna In<br />
* Digital Antenna In<br />
* Analog Antenna In<br />
* S-Video/Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:photo_dvb_trio.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Hybrid|FlyDVB-T Hybrid]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_hybrid.htm]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
|<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[LifeView FlyDVB-T Hybrid MCE PRO|FlyDVB-T Hybrid MCE PRO]]<br />
|<br />
|DVB-T and Analog HW encoder<br />
|<br />
* Philips [[SAA7131]] <br />
* Vixs encoder<br />
|<br />
* Cable/Antenna In <br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Hybrid analog/digital HW encoder card<br />
* Supported by Linux kernel 2.6.15<br />
|[[Image:323.jpg|thumb|120px|]]<br />
|}<br />
<br />
=== [[Lorenzen]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[SL DVB-T PCI]] <br />
<br />
<strike>[http://www.lorenzen.de/produkte/cgi-bin/iboshop.cgi?showd60!,3709831960,3930]</strike><br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
* Can support +5V power supply for Antenna (Jumper on board)<br />
| <strike>(Old Design): [http://www.lorenzen.de/produkte/bilder/3922%20200.jpg]</strike><br />
[[Image:Lorenzen_SL_DVB-T_PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Medion]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Medion CTX953 | CTX953]] <br />
<br />
(a.k.a Creatix CTX 953: [http://www.creatix.de/produkte/multimedia/ctx953.htm])<br />
|<br />
| DVB-T tested and works with 2.6.29, analog is untested by me. I suspect it works, too.<br />
|<br />
* NXP SAA 7131E/03/G<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
* NXP 8275AC1<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Audio-In (3.5mm)<br />
* Composite-In<br />
|<br />
* ml-thread: [http://article.gmane.org/gmane.comp.video.video4linux/34255]<br />
|<br />
[[Image:Medion_CTX953_front.jpg|thumb|150px|]]<br />
[[Image:Medion_CTX953_back.jpg|thumb|150px|]]<br />
<br />
|- valign="top"<br />
|<br />
Philips TV/Radio Card CTX918, (Medion 7134), PCI<br />
<br />
|~6€, Ebay Germany<br />
|DVB-T working, FM apparently too ([http://linuxtv.org/v4lwiki/index.php/Generic_SAA7134_Card_Installation Instructions])<br />
|<br />
<br />
* FMD1216ME<br />
* Philips SAA7134HL<br />
* SV92PL<br />
* CSP1034S<br />
<br />
|<br />
* Antenna In<br />
* FM In<br />
|<br />
[http://www.creatix.de/support/download/gruppe6/CTX918_spec.pdf Spec]<br />
[http://www.creatix.de/support/typ.php?tid=62&gid=6 Link to OEM]<br />
|<br />
[[Image:7134.jpg|thumb|150px|]]<br />
|}<br />
<br />
=== [[MSI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D|TV@nywhere A/D]]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
* clone of LifeView FlyDVB-T Hybrid<br />
* requires "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1]] <br />
|Around $65 AUD<br />
|'''Unsupported'''<br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* As of kernel 2.6.23.13 the frontend seems to not work, even with "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1 alternate]] <br />
|Around $65 AUD<br />
|Analog and DVB-T (partially)<br />
|<br />
*Philips [[SAA7131E]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
*Tuner 8275AC1<br />
|<br />
* FM Antenna in<br />
* TV Antenna in<br />
* AV input (comes with adaptor that allows connection of s-video or composite video as well as RCA connectors for audio) <br />
* IR-Remote<br />
|<br />
* This card mostly works with the latest drivers as of 2008-02-08 (tested using mythbuntu 2.6.22-14-generic kernel). There is a problem with unreliable firmware loading. The card only works if the firmware loads correctly.<br />
* Requires card=109<br />
|<br />
[[Image:MSI TV@nywhere A-D v1.1.JPG|thumb|120px]]<br />
|}<br />
<br />
<br />
=== [[Mygica]] ===<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Mygica T1800B|T1800B]]<br />
| 70 AUD<br />
|Dual DVB-T, DAB+ (untested), Remote Control (untested), <br />
|RTL2832U<br />
|<br />
* Antenna In<br />
* AV In<br />
|Requires out-of-tree drivers (see documentation)<br />
|[http://www.auspcmarket.com.au/info/EL-MY-T1800B/]<br />
|- valign="top"<br />
|[[Mygica T188|T188]]<br />
| 30 AUD<br />
|Single DVB-T, DAB+ (untested), Remote Control (untested)<br />
|RTL2832U, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* Uses same (out-of-tree) drivers as the T1800B.<br />
* Driver appears to have bug which prevents getting a signal lock if more than one of these cards are present.<br />
|[http://i49.tinypic.com/68rfon.jpg]<br />
|}<br />
<br />
=== [[Nebula]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Nebula DigiTV PCI|DigiTV PCI]]<br />
<br />
[http://www.nebula-electronics.com/information/info.asp?Code=0001]<br />
|ca. 150 €<br />
|DVB,VDR<br> NXT6000 demod supported by recent kernels, mt352 demod will be supported by kernels >= 2.6.14-rc1.<br />
|<b>Demod Chip</b><br><br />
<i>Old board:</i><br> <br />
[[ATI NXT6000]]<br><br />
<i>New board:</i><br><br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br><br />
<b>Tuner (tin box)</b><br><br />
[[Alps TDED4]] <i>(both boards)</i><br><br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* AV In<br />
* Remote In<br />
|<br />
* Comes with remote<br />
|[http://www.nebula-electronics.com/images/ProdPCI.jpg]<br />
|}<br />
<br />
=== [[NotOnlyTV]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[NotOnlyTV LV3H|LV3H]]<br />
<br />
[http://www.notonlytv.net/p_lv3h.html]<br />
| 39 €<br />
|<br />
*DVB-T <br />
*Analog (brightness problems)<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23881]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 (Geniatech X8000-MT DVBT)<br><br />
Some options are needed to work properly: <br />
<code>options cx88xx card=81 tuner=71</code><br />
|[http://www.notonlytv.net/img/products/lv3h_01.jpg]<br />
|}<br />
<br />
=== [[NPG]] ===<br />
<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Real DVB-T]] <br>[http://www.npgtech.com]<br />
|<br />
|Doesn't seem to work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23880-19]] CX22702-25<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
* 2.6.16 kernel recognizes the card as "Conexant DVB-T reference design" (card=19)<br />
|<br />
|}<br />
<br />
=== [[Pinnacle]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[PCTV MediaCenter 300i]]<br />
<br />
[http://www.pinnaclesys.com/ProductPage_n.asp?Product_ID=2451&Langue_ID=4]<br />
|ca. 110 €<br />
<br />
(~40 € for "Dazzle" package with no remote)<br />
|DVB works with patches from [http://dl.bytesex.org/patches/], but see this thread [http://www.linuxtv.org/pipermail/linux-dvb/2005-December/007035.html] for recent regression post 2.6.12<br />
Everyone seems happy using Hartmut's Patch [http://www.linuxtv.org/pipermail/linux-dvb/2006-February/008345.html] with more recent kernels. Check the associated thread for more info...<br />
<br />
July 2006: Worked out of the box with recent kernel 2.6.17 Debian unstable!<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br />
[[tda9887]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/ProductImages/Ss_01_MediaCenter300iB_02.jpg]<br />
<br />
[http://www.pinnaclesys.com/images/box/box_128x148_pctvmediacenter300i_bl_4.jpg]<br />
|- valign="top"<br />
|[[PCTV MediaCenter 310i]]<br />
<br />
[http://www.pinnaclesys.com/PublicSite/sp/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+310i.htm]<br />
|ca. 110 €<br />
|DVB works with Debian AMD64 testing<br />
<br />
Worked out of the box with recent kernel 2.6.20<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
[[tda8275A]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
* Quality better than Pinnacle software for win xp.<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[PCTV Dual DVB-T Pro PCI / 2000i]] <br />
<br />
[http://www.pinnaclesys.com/PublicSite/de/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+%28DVB-S_DVB-T%29/PCTV+Dual+DVB-T+Pro+PCI.htm]<br />
|ca. 120 €<br />
|Not working so far (Oct.2006). Shows up as three unknown PCI devices ID 0040, 0041, 0042 with subsystems 0044. Manufacturer ''Pinnacle Systems Inc.'' detected correctly.<br />
|2x [[Zarlink ZL10353]]<br> 2x [[Microtune MT2060]]<br />
[[PINNACLE DTV BRIDGE 0612MP007/0611MP007]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Dual DVB-T tuner card.<br />
* Comes with remote control. Uses Pinnacle's own application, might not be avalable for Linux.<br />
* [http://reactorcore.net/v4l/pctv-2000i High Quality Pictures]<br />
|[http://www.sandbox.de/dvb-t/Pinnacle_Dual_DVB-T_Pro_PCI.jpg]<br />
|}<br />
<br />
=== [[Satelco]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Satelco Easywatch PCI DVB-T]]<br />
<br />
[http://www.satelco.de/htm/shop/popup/intro_dvb_t.htm]<br />
|<br />
ca. 60 €<br />
|<br />
*Not supported yet by present kernel release (2.6.25).<br />
*A [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=251130bf266000fe6e9fdccda50fe4b5c1d6cb24 patch] is on the way. Latest [http://linuxtv.org/hg/v4l-dvb v4l-dvb drivers] should be [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers#Case_2:_Installation_of_LinuxTV_Drivers_Required manually compiled] (this requires kernel 2.6.19 or higher).<br />
*This card is not suitable for [http://knoppmyth.net/knoppmyth.html KnoppMyth R5F27], as the aforementioned workaround may be tricky to apply to the distro's kernel (2.6.18-chw-13).<br />
|<br />
* '''PCI bridge''': [[Philips SAA7146]]<br />
* '''Tuner''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In (top)<br />
* Antenna Out (bottom)<br />
|<br />
Onboard connector to Common Interface extension kit (not included).<br />
|<br />
[http://www.satelco.de/img/produkte/easywatch/easywatch_dvb_t_2.jpg]<br />
[http://www.satelco.de/img/produkte/easywatch/dvbt/thumb/tn_2vorne.jpg]<br />
|}<br />
<br />
=== [[TechniSat]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TechniSat AirStar 2 PCI / Air2PC DVB PCI|AirStar 2 PCI / Air2PC DVB PCI]] [http://www.technisat.de/?site=produkte/produkteview.php&kid=1,29&pid=1352&PHPSESSID=69a82464181e34e44928a4fe4ff4fe6c&reload]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.vdr-portal.de/board/thread.php?sid=&postid=154853][http://www.vdr-portal.de/board/thread.php?postid=163580#post163580]<br />
| <br />
* [[Zarlink]] [[Zarlink MT352|MT352]] <br />
* (autodetect in linux kernel driver also includes: cx24123, cx24113, s5h1420 modules)<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
|<br />
* Remote and LIRC Compatible Serial Dongle Included.<br />
<br />
|[[Image:AirStar_DVB-T_PCI.jpg|thumb|120px]]<br />
|}<br />
<br />
=== [[TechnoTrend]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|-<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1200|TT-DVB-T 1200]]<br />
|ca. 210 €<br />
|DVB, VDR<br><br />
|?<br />
|<br />
* Antenna In<br />
* Video Out<br />
|<br />
* The TT-DVB-T 1200 is the only known "[[Full-featured Card|full-featured]]" DVB-T Card.<br />
* Can only tune UHF channels: '''VHF is not supported with this card!'''<br />
|.<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1500|TT-DVB-T 1500]]<br />
<br />
[http://www.technotrend.com/2783/TT-budget__T-1500.html]<br />
|ca. 79 €<br />
|DVB, VDR<br><br />
|Bridge:[[Philips SAA7146]]<br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046]]<br><br />
|<br />
* Antenna In<br />
* [[Common Interface]] (on board connector). Needs to be bought separately.<br />
|<br />
* Gives wrong frequencies when channelscanning in for example xawtv4 and mythtv for at least one user. As long as the channel frequencies are adjusted afterwards everything works fine. (Hardware: 0000:00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01))<br />
* To make the fine piece of remotecontrol that comes with the budget t 1500 card, add these lines to:<br />
* /etc/modprobe.d/options<br />
* options budget_ci rc5_device=255<br />
* And use it with the [http://linuxtv.org/vdrwiki/index.php/Remote-plugin VDR Remote-plugin]<br />
<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1300|TT-DVB-T 1300]]<br />
<br />
[http://www.technotrend.de/english/products/pcproducts3-1.html] [http://www.technotrend.de/english/products/pcproducts3-2.html]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[TechnoTrend TT-PCline Budget3 TA1000|TT-PCline Budget3 TA1000]]<br />
|ca. 90 €<br />
|?<br />
|?<br />
|<br />
* Antenna In<br />
|<br />
* Combination DVB-T and analog (PAL/NTSC)<br />
|[http://www.dvbshop.net/images/budget3.jpg]<br />
|}<br />
<br />
=== [[TerraTec]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1200_DVB-T|Cinergy 1200 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=224]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Bridge: [[Philips SAA7146]]<br><br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* Video In<br />
| <br />
|<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1400_DVB-T|Cinergy 1400 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=244]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Tuner: Thomson [[TT 7579]]<br><br />
Chipset Connexant CX88XX<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
* Remote In <br />
|<br />
* Use cx88xx with option card=30 (if kernel>=2.6.13) or card=19 (if kernel < 2.6.13) and use drivers:<br />
*cx88_dvb <br />
*cx8802 <br />
*cx8800 <br />
*cx88_blackbird (connexant ref. design)<br />
|[[http://www.sandbox.de/dvb-t/TerraTec_Cinergy_1400_DVB-T_PCI.jpg]]<br />
|- valign="top"<br />
|[[TerraTec Cinergy HT PCI|Cinergy HT PCI]] <br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T, Analog TV, Radio<br />
|<br />
* '''Tuner''': Thomson [[TT 7579]]<br />
* '''Chipset''': Philips [[Philips_SAA7134|SAA7134]]<br />
* '''Analog Tuner''': tda8290+75<br><br />
* '''Digital Chipset''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Works with Module saa7134 for analog TV and saa7134-dvb for DVB-T<br />
* Drivers from linuxtv.org work fine, no special options needed.<br />
* Has remote included, does not work for me in linux so far.<br />
* PCI subsystem ID: 153b:1175<br />
* Note: There is an unsupported newer revision under the same name, see below.<br />
|<br />
|- valign="top"<br />
| style="white-space:nowrap" | New [[Cinergy HT PCI]]<br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T<br />
|Chipset [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Newer revision of TerraTec Cinergy HT PCI<br />
* PCI subsystem ID: 153b:1177<br />
* DVB-T working with at least 2.6.35 vanilla, cx23885 + zl10353<br />
|<br />
|}<br />
<br />
=== [[TwinHan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]] [http://www.twinhan.com]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[Hama]] [[DVB-T PCI-Karte]]<br />
|[http://www.twinhan.com/product_terrestrial_4.asp]<br />
<br />
|- valign="top"<br />
|[[DTV Ter PCI (A&D)]] [http://www.conrad.de/script/twinhan_dtv_ter.sap]<br />
VP-30540<br />
|ca. 70 €<br />
|Works ok with FC4 latest 2.6 kernel and cx88xx option card=42.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Conexant]] [[Conexant CX2388x|CX23883]]<br />
* [[Philips]] FMD1216ME<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
You will see 4 new PCI-Devices:<br />
* 14f1:8800 Conexant CX23880/1/2/3 PCI Video and Audio Decoder<br />
* 14f1:8801 unknown<br />
* 14f1:8802 unknown<br />
* 14f1:8804 unknown<br />
<br />
The non-DVB-T (analog-tuner) evtl. works running<br />
modprobe cx88xx tuner=63<br />
<br />
EDIT: Got DVB-T to work with option card=42:<br />
<br>cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro<br />
<br>Playback is smooth the earlier comment about Jekryness was due<br />
<br>to not have overlay switched on. <br />
<br>The card even looks like the digitalnow DNTV Live! DVB-T Pro [http://www.digitalnow.com.au/product_pages/DNTV_Pro.html]<br />
|[http://www.mcsat.co.uk/catalog/images/ter-D+A.gif]<br />
|- valign="top"<br />
|[[TwinHan 3506 Hybrid|3506 Hybrid]]<br />
<br />
[http://www.twinhan.com/product_D%2BA_3056_1.asp]<br />
<br />
|~ £25 in UK<br />
|Works ok with FC7 latest 2.6 kernel and saa7134 module, card=109.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
I<sup>2</sup>C gate tuning problem, you'll need to compile the driver with a small change<br />
|<br />
|}<br />
<br />
=== Ultraview ===<br />
* [[DViCO_FusionHDTV_DVB-T1|Ultraview DVB-T Plus]]<br />
<br />
=== [[Yuan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Stratford PG300]] <br />
<br />
[http://www.yuan.com.tw/en/products/vdo/vdo_PG300.html]<br />
|AUD $45<br />
|DVB, VDR possible<br><br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]] [[Conexant CX22702|CX22702-15]] <br />
|<br />
* Antenna in<br />
* IR in<br />
* Antenna Loop out<br />
|<br />
* Remote & IR-receiver included<br />
* DVB Works with "options cx88xx card=43"<br />
* Remote '''Not''' Working<br />
* Includes Low-Profile bracket<br />
|<br />
[http://www.gamedude.com.au/yuan]<br />
|<br />
<br />
|-<br />
| [[Yuan MPC 788 Hybrid Mini-PCI]]<br />
<br />
[http://www.yuan.com.tw/jp/products/tuner/productscontent3.htm]<br />
| $25USD<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive xc3028<br />
* Demod: ZL10353<br />
* Demux: CX23883<br />
|<br />
* Antenna In<br />
<br />
|<br />
* Remote and external antenna included.<br />
* Same components as Winfast DTV1800 card.<br />
* Analog works with "options cx88xx card=81" in "/etc/modprobe.d/video4linux"<br />
* Tested analog with MPlayer.<br />
* Basic testing with Kaffeine. Kaffeine detected the card and scanned for channels, however testing was done in Canada where no DVB-T signal exist.<br />
|<br />
<br />
|}<br />
<br />
== Currently Unsupported DVB-T PCI cards==<br />
{{help to support}}<br />
<br><br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br><br />
<br>Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures''<br />
|- valign="top"<br />
|'''[[Pinnacle]]<br><br />
[[Pinnacle PCTV DVB-T PCI (250i)|PCTV DVB-T PCI (250i)]]''' [http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+(DVB-S_DVB-T)/PCTV+DVB-T+PCI+(250i).htm]<br><br />
<br><br />
~£26 in the UK<br />
|No support yet<br />
|<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/screenshots/PCTV_DVB-T_PCI_persp_midres.jpg]<br />
<br />
|- valign="top"<br />
|'''[[X3M digital S.A. | X3M tv-tuners]]<br><br />
[[x3m digital S.A HPC2000|HPC2000]]'''<br>EUR ~45 (Euro)<br />
|No support yet<br><br />
|<br />
*Chipset: Conexant CX23880<br />
*Multiplexer-Demultiplexer: hcf4052<br />
*Demodulator: ZL10353/WJCE6353 <br />
*Tuner: xc3028 (Xceive)<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
* Supports MPEG-2 and MPEG-4(H264)<br />
* it seems to be a [http://www.geniatech.com/dwonloadf/d_dvbt.htm Geniatech DVB-T TV Hybrid X8000MT]; windows drivers of both cards are the same.<br />
* an open source linux driver, seemingly based on an older checkout of the V4L HG tree, can be found at [http://www.geniatech.com/driver-eng/linux/v4l-dvb-experimental-x8000mt.tar.gz]<br />
* the firmware, which the 2.6.31-rc1 kernel tuner driver does not seem to have a loader for, is located at [http://www.geniatech.com/driver-eng/linux/fw25_linux.tar.gz]<br />
* this geniatech firmware is identical with the X3M firmware provided here[http://www.x3mtv-tuners.de/uploads/media/HPC2000_x86_Linux_Treiber.zip] This supports the notion that those cards are in fact identical<br />
* the xc3028-v27.fw firmware extracted from other Xceive tuner based cards' windows drivers via extract_xc3028.pl does not seem to work on this card<br />
* from skimming the source code of the xc3028 driver(kernel and geniatech) it seems to me that the xc3028-v27.fw firmware is simply a binary compound of the same components(though the length of the chunks seems to differ) that are provided in the geniatech firmware.<br />
|<br />
[[Image:Hpc2000.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|'''[[Compro Technology | Compro]]<br><br />
[[Compro VideoMate DVB-T220|VideoMate DVB-T220]]'''<br />
|No support yet<br><br />
Detects as a T200<br />
|<br />
*Chipset: SAA7130<br />
*COFDM Demodulator: MT352<br />
*Tuner: [[Quantek QT1010]]<br />
|<br />
*Antenna In<br />
*S-Video in<br />
*Remote In<br />
|<br />
* DVB-T Card<br />
* Comes with remote control.<br />
|<br />
[[Image:VideoMate_DVB-T220.JPG|thumb|120px|]]<br />
|}<br />
<br />
<br />
[[Category:DVB-T| ]]<br />
[[Category:DVB-T PCI Cards| ]]</div>Michaelphttps://www.linuxtv.org/wiki/index.php?title=DVB-T_PCI_cards&diff=31655DVB-T PCI cards2013-02-02T05:10:29Z<p>Michaelp: /* Leadtek */</p>
<hr />
<div>On this page you will find information regarding [[DVB-T]] [[PCI]] cards.<br />
<br />
{{non-exhaustive list}}<br />
<br><br />
==Supported DVB-T PCI Cards==<br />
The following table lists the confirmed working DVB-T PCI cards and provides a brief summary of their features and components. If you need more technical information on a device, have a look at its specific wiki article. <br />
<br />
=== [[ASUS]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Type'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[ASUS My Cinema-P7131 Hybrid|My Cinema-P7131 Dual]]<br />
<br />
[[Image:ASUS-MyCinema-P7131-Dual-box.jpg|thumb|120px]]<br />
|DVB-T + Analog [http://uk.asus.com/products.aspx?l1=18&l2=83&l3=252&l4=0&model=547&modelmenu=1]<br />
|ca. 45 €<br />
|DVB, VDR<br />
| <br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* DVB-T/FM in<br />
* Analog TV in<br />
* IR in<br />
* AV in (with cable to composite, S-video and audio)<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* With Low-Profile bracket<br />
* Supports FM-radio<br />
* Needs firmware (dvb-fe-tda10046.fw); see the [[ASUS My Cinema-P7131 Hybrid|P7131 article]]<br />
- Following the above article works under Ubuntu 7.10 (Gutsy Gibbon) using Kaffeine 0.8.5 (running the Xine Player Engine ewith the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package)<br />
|[http://www.bttv-gallery.de/HPIM2609.JPG_asus_tiger_302_a.jpg]<br />
[[Image:ASUS-MyCinema-P7131-Dual.jpg|thumb|50px]]<br />
[[Image:ASUS-MyCinema-P7131-Dual-rear.jpg|thumb|50px]]<br />
|}<br />
<br />
=== [[AVerMedia]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T (A761) | AVerTV DVB-T (A761)]]<br />
<br />
<strike>[http://www.avermedia.de/Products/TV_Tuner/DVB-T/main.htm]</strike><br />
<br />
oldest AVerTV DVB-T model<br />
|ca. 90 €<br />
|DVB, VDR<br />
<br />
[http://www.vaslet.de]<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
* S-Video in<br />
* Composite in<br />
|<br />
* Comes with remote and Infra-Red-Sensor<br />
* Low-Profile-Card<br />
* Difference compared to 771 is the Tuner and Composite-in<br />
|<strike>[http://www.avermedia.de/Products/images/Products/DVB-T_FB.jpg]</strike><br />
[http://www.vaslet.de/content/dvbt/averdvb_a761_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_761.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 771 (A771) | AVerTV DVB-T 771 (A771)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt771.asp?show=1]<br />
|ca. 90 €<br />
|DVB, VDR possible<br />
<br />
[http://www.gossamer-threads.com/lists/mythtv/users/72584] [http://www.frokaschwei.net/avtv771/avermedia.html], [http://www.mail-archive.com/linux-dvb@linuxtv.org/msg17579.html] [http://www.vaslet.de]<br />
<br />
Warning some people experience problems with this card search for mt352_read_register on the mailing list.<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-rerceiver included<br />
* Low-Profile-Card<br />
* Difference to the older "761" is the Tuner and the missing Composite-in<br />
|<strike>[http://www.avermedia.de/Products/TV_Tuner/dvbt771/771.jpg]</strike> [http://www.vaslet.de/content/dvbt/averdvb_a771_pcb_top.jpg]<br />
[[Image:Avertv_dvb-t_771.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16AR) | AVerTV DVB-T 777 (A16AR)]]<br />
<br />
newest model of the AVerTV DVB-T<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. 65 €<br />
|DVB, VDR ab 2.6.17-rc1<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Remote and Infra-red-receiver included (v4l-dvb needs a patch to properly work)<br />
* Works on Ubuntu 6.10 "almost" out of the box.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:Avermedia777.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV DVB-T 777 (A16A-C)| AVerTV DVB-T 777 (A16A-C)]]<br />
<br />
[http://www.avermedia.de/cgi-bin/products_digitvtuner_dvbt777.asp?show=1]<br />
|ca. ? €<br />
|DVB<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
|<br />
* Tested on 32bit Fedora 9.<br />
* HDTV *(1080i / 720P) ready<br />
|[[Image:AVER777A16A-C_front.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[AVerMedia AVerTV Hybrid+FM PCI (A16D)| AVerTV Hybrid+FM PCI (A16D)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI(A16D).asp?show=1#]<br />
|ca. 80 €<br />
| Analogue, kernel 2.6.26; <br />
DVB-T, kernel 2.6.27<br />
<br />
For DVB and experimental support, see [http://mcentral.de/wiki/index.php5/AVerMedia_AverTV_Hybrid_FM_PCI_A16D here], and maybe [http://mcentral.de/wiki/index.php5/AverMedia_Cardbus_Hybrid_TV_FM_E506R here]<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Xceive]] [[Xceive XC3018|XC3018]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|[http://www.avermedia.com/docs/productimage/AVerTV-Hybrid+FM-PCI-b.jpg]<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[AVerMedia AVerTV Hybrid+FM PCI (A16AR)| AVerTV Hybrid+FM PCI (A16AR)]]<br />
<br />
[http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridPCI.asp?show=1]<br />
|<br />
| Yes<br />
FM radio not supported<br />
|<br />
* Philips TD1316A (tuner)<br />
* Philips TDA9887 (analog demodulator)<br />
* Philips SAA7135HL (A/V decoder)<br />
* Zarlink MT352 (DVB-T demodulator)<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* FM<br />
|<br />
* Analog / DVB-T<br />
* Remote and Infra-red-receiver included<br />
* HDTV *(1080i / 720P) ready<br />
|<br />
<br />
|- valign="top"<br />
|[[AVerMedia_AVerTV_DVB-T_Super_007 | AVerTV DVB-T Super 007]]<br />
<br />
[http://www.avermedia.com/EN/Default.aspx?TYPE=vipplayercard.htm&PT=product&tv_TCAT_POS=0&PID=4710710671877]<br />
|ca. 60 €<br />
| Yes (with [http://lists.zerezo.com/video4linux/msg19205.html patch])<br />
|<br />
* Philips [[Philips SAA7134|SAA7134]]<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* DVB-T / Analog<br />
* Remote and Infra-red-receiver included<br />
* (this is "Hybrid Super 007" with Analog+DVB-T or "DVB-T Super 007" with only DVB-T?)<br />
|<br />
[[Image:Super_007_box.jpg|thumb|50px|]]<br />
[[Image:Super_007_card.jpg|thumb|50px|]]<br />
|<br />
<br />
*<br />
* DVB-T DUAL LV32TDLX<br />
|}<br />
<br />
=== [[ChainTech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[DTT 1000 PCI]]<br />
<br />
<strike>[http://www.chaintech.com.tw/tw/eng/product_spec.asp?MPSNo=15&PISNo=170]</strike><br />
|ca. 100 €<br />
|DVB, VDR<br> (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Hangs at least older kernels (<2.6.12) unless the bttv module is loaded with parameters "i2c_hw=1 card=0x71". This may cause boot problems when the module is automatically loaded by hotplug.<br />
|<strike>[http://www.chaintech.com.tw/tw/images/Products/DMPD/DTT1000_L.jpg]</strike><br />
|}<br />
<br />
=== [[Club 3D]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[ZAP-TV2202]]<br />
<br />
[http://www.club3d.nl/index.php/products/zaptv/item/11]<br />
<br />
[http://www.club3d.nl/support/manuals/zap-tv/2202/ZAPTV2202_QuickGuide.pdf Manual]<br />
|ca. 67 €<br />
|DVB, Analogue<br />
| Philips [[Philips SAA7131|SAA7131]]<br />
|<br />
* Antenna In<br><br />
* Radio In<br><br />
* S-Video In In<br><br />
|<br />
* Shows up as device 169d:3306<br />
* Installed with command modprobe saa7134 card=94<br />
|<br />
|}<br />
<br />
=== [[Compro Technology|Compro]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
|[[Compro VideoMate T200|VideoMate DVB-T200]]<br />
[http://www.comprousa.com/New/en/product/vmt200.html]<br />
|ca. 37 €<br />
|DVB kernel 2.6.17<br />
| Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br><br />
* S-Video In<br><br />
* Composite In<br><br />
|<br />
* Remote and Infra-red-receiver included <br />
(to get the irda working correctly you may find this mail useful [http://marc.theaimsgroup.com/?l=linux-video&m=113672404400380&w=2] )<br />
* HDTV *(1080i / 720P) ready<br />
* Power on via irda<br />
* warning: problems with poor reception: [http://cvs.mythtv.org/trac/ticket/2664]<br />
|<br />
|}<br />
<br />
=== [[DViCO]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[FusionHDTV Dual Digital 4]]<br />
<br />
[http://www.fusionhdtv.co.kr/ENG/products/DVBTdual4.aspx]<br />
|<br />
* DVB, VDR<br />
* <strike>works with [http://fremnet.net/article/228/dvico-fusionhdtv-dual-digital-4-under-linux patches] - (non Australian users should ignore the dd4.au.patch patch and not use the xc3028.au2.fw firmware).</strike> See https://help.ubuntu.com/community/DViCO_Dual_Digital_4<br />
Revision 2 of this card has just been released ([http://mandmservices.com.au/dvico image]). The new card uses a DIBCOM tuner and modulator <strike>and does not work under the current driver.</strike><br />
<br><br />
The linuxTV drivers are now updated, the revision two works beautifully. The changes do not yet seem to be merged with the Linux kernel (2.6.27), the link above should help you install the drivers. The Rev 2 card may not work properly with older kernels such as 2.6.22 (AMD 780G chipsets, USB disconnects), even using the latest linuxTV drivers. The following link also has some useful information: http://ubuntuforums.org/showthread.php?t=616103 <br />
|Rev 1- Zarlink ZL10353<br />
Rev 2- Dibcom 7070pb1 tuner, CY7C68013A USB peripheral controller, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna in<br />
* IR In<br />
|<br />
* Dual DVB-T tuner card<br />
* Supports HD streams<br />
* <strike>Requires patching</strike><br />
* Is actually two USB devices attached though a Via PCI-to-USB bridge<br />
* Uses <tt>dvb-usb-cxusb</tt> module<br />
* Rev 2 uses <tt>dib0070, dib7000p, dib7000m, dib3000mc, dibx000_common</tt> modules<br />
* Includes low-profile PCI bracket<br />
|<br />
[[Image:DViCO_FusionHDTV_Dual_Digital_4.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|<br />
FusionHDTV Dual Digital 2<br />
|<br />
* DVB-T<br />
| <br />
* CX23880<br />
|<br />
* Antenna In<br />
* IR In<br />
* S-Video In<br />
* USB Type-B connector<br />
|<br />
* Dual PCI/USB device - has a loopback cable<br />
* Works out of the box in Ubuntu 10.04 (and earlier versions)<br />
* Low-Profile<br />
|<br />
(No Picture)<br />
|}<br />
<br />
* [[DViCO FusionHDTV DVB-T1]]<br />
* [[DViCO FusionHDTV DVB-T Lite]]<br />
<br><br />
<br />
=== [[GDI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[GDI Black Gold]]<br />
<br />
[http://www.blackgold.tv/products/digital.htm]<br />
|<br />
|S-Video support works (Small patch which is now in CVS). DVB doesn't work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]]/Front End CX22702/Tuner Philips TU1216/[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]] demodulator<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
|Like this, but slightly longer with a heat sink. <br><br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_Plan.jpg Card]<br />
[http://www.gta-ltd.co.uk/Product/Black%20Gold%20TV/Graphics/Signature_End.jpg Connectors]<br />
|}<br />
<br />
=== [[Geniatech]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech X8000-MT|X8000-MT]]<br />
<br />
[http://www.geniatech.com/pa/x8000t.asp]<br />
| 45 €<br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23883]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 <br><br />
Identical board to [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[[Image:X8000T-DVBT-PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Hama]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[DVB-T PCI-Karte]]<br />
<br />
<strike>[http://www.hama.de/portal/articleId*110877/action*2563/searchMode*1/bySearch*dvb-t]</strike><br />
|ca. 80 €<br />
|DVB, VDR possible<br><br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|[[Fusion 878A]]<br />
|<br />
* Antenna In<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[TwinHan]] [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]]<br />
|[http://www.hama.de/bilder/00049/abb/00049019abb.jpg]<br />
|}<br />
<br />
=== [[Hauppauge]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|Old [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(until 06/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* '''Since 07/2004 Hauppauge have been shipping a new Nova-T (see below)'''<br />
* Comes with remote<br />
[[Image:Hauppauge_nova-t_remote.jpg|thumb|30px|]]<br />
|[[Image:Hauppauge_nova-t_old.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|New [[Hauppauge WinTV-NOVA-T PCI|WinTV-NOVA-T PCI]]<br />
<br />
(since 07/2004) <strike>[http://213.221.87.83/prod_nova-t-pci.htm]</strike><br />
<br />
[http://www.hauppauge.com/pages/products/data_novatpci.html en]<br />
|ca. 100 €<br />
|Works with patches from [http://dl.bytesex.org/patches/] or >= kernel 2.6.12<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* Remote In<br />
|<br />
* Drivers included in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* Comes with same remote as the older model<br />
|[http://sulu.sohanet.de/tmp/]<br />
[[Image:Hauppauge_nova-t_juli2004.jpg|thumb|50px|]]<br />
[[Image:Hauppauge_nova-t_juli2004_Packung.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge WinTV-NOVA-T-500|WinTV-NOVA-T-500]]<br />
<br />
(since 09/2006) [http://www.hauppauge.co.uk/pages/products/data_novat500.html]<br />
|ca. 100 €<br />
|works with v4l-dvb hg from 2006-09-20 [http://www.linuxtv.org/repo/] or kernel >= 2.6.19 - <br />
|[[DiBcom]] [[DiBcom DiB7xxx|DiB0700]]<br />
|<br />
* Antenna In<br />
* Remote In (should now be working)<br />
|<br />
*Dual DVB-T tuner card.<br />
*As of 28/08/2008, according to Michael Krufky, all currently released versions, including the Diversity model, are supported by head of v4l-dvb hg, and the driver is likely to stay ahead of new card releases in the future.<br />
*PCI 2.2 card using 3.3V. Failed to run on PCI 2.1 system.<br />
|<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1300|WinTV-HVR-1300]] (since 07/2005)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1300.html]<br />
(HVR-1100 is similiar to HVR-1300, but without MPEG hardware encoder)<br />
|ca. 130 €<br />
|Digital & Analogue working in repository [http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=3e90edbf7c53584f109fe091d7380e8bda9fa282;style=gitweb]. Encoder support being worked on.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* DVB support in kernel >= 2.6.12 (CONFIG_VIDEO_CX88_DVB)<br />
* This card has tuning problems in MythTV and Kaffeine (works with tzap). See the card page.<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|[http://sulu.sohanet.de/tmp/][[Image:100 7999.JPG|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1110|WinTV-HVR-1110]] (since 09/2006)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1110 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10046 chipset)<br />
|ca. 70 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported with the latest 2.6.18 kernel, need latest v4l-dvb (mercurial) to work on older kernels. See [http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_Mercurial].<br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|new [[Hauppauge WinTV-HVR-1120|WinTV-HVR-1120]] (since 05/2009)<br />
<br />
[http://www.hauppauge.co.uk/pages/products/data_hvr1100.html]<br />
<br />
(HVR-1120 is similiar to HVR-1100, but with a triangular shape and a Philips TDA10048 chipset)<br />
|ca. 50 €<br />
|DVB-T and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* TV Antenna In<br />
* FM Antenna In<br />
* AV (Cinch)<br />
* S-Video (Mini-DIN)<br />
* Audio In<br />
* Remote I<br />
|<br />
* Supported since kernel 2.6.31. <br />
[[Image:hauppage_hvr-1300.jpg|thumb|30px|]]<br />
|<br />
[[Image:HVR-1110.jpg|thumb|50px|]]<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-3000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr3000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hvr3000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hvr3000.jpg|thumb|50px|]]<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[Hauppauge_WinTV-HVR-4000]]<br />
<br />
[http://www.hauppauge.co.uk/site/products/data_hvr4000.html]<br />
<br />
|<br />
|DVB-T, DVB-S, DVB-S2 and Analog<br />
|Connexant CX22702 (DVB-T demodulator)<br />
|<br />
FM, TV, SAT, S-VIDEO IN, LINE IN, IR. <br />
|<br />
* Supported in the Linux kernel since version 2.6.28.<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|30px|]]<br />
|<br />
[[Image:Hauppague WinTV-HVR-4000.jpg|thumb|50px|]]<br />
<br />
|}<br />
=== [[Jactek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Geniatech JH-600|JH-600]]<br />
<br />
[http://www.jactek.com.tw/product_pctv/product_jh600.html]<br />
| <br />
|<br />
*DVB-T <br />
*Analog<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-2388x]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Identical board to [[Geniatech X8000-MT|X8000-MT]], [[NotOnlyTV LV3H|LV3H]] and [[x3m digital S.A HPC2000|HPC2000]]<br />
|[http://www.jactek.com.tw/product_pctv/images/product_jh600_34.jpg]<br />
|}<br />
<br />
=== [[KNC1]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[KNC1 TV-Station DVB-T | TV-Station DVB-T]] <br />
<br />
[http://www.kncone.de/d/produkte/digital_dvb_t.htm]<br />
<br />
|ca. 80 €<br />
|DVB, ? <br />
|Philips [[Philips SAA7146|SAA7146]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* [[Common Interface]]<br />
| <br />
|<br />
|}<br />
<br />
=== [[KWorld]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[KWorld_V-Stream_Xpert_DVB-T_PCI|V-Stream Xpert DVB-T PCI]] <br />
<br />
[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.html]<br />
|ca. 80 €<br />
|DVB, VDR possible [http:///www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00716.html] New card:[http://www.manenti.org/blog/archives/000089.html]<br />
Full support :[[http://linuxtv.org/wiki/index.php/KWorld_V-Stream_Xpert_DVB-T_%28tuner_THOMSON_DTT_7579%29]]<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite In<br />
* Remote In<br />
|<br />
* Remote & IR-receiver included<br />
* There are three versions of this card, one with a Samsung tuner similar to the AVerMedia 771, another with a Thomson tuner (similar to the Nova-T 90002) and another with Thomson tuner DTT 7579. All versions are supported. <br />
|[http://www.kworld.com.tw/en/product/DVBT-PCI/DVBT-PCI.jpg]<br />
|- valign="top"<br />
|[[KWorld DVB-T 220 | DVB-T 220]]<br />
<br />
[http://www.kworld.com.tw/en/kworld/body/Products/D+A/DVB-T220.htm]<br />
|<br />
|DVB, analogue<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In (two)<br />
* FM In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe saa7134-dvb' to enable DVB.<br />
| <br />
[[Image:kworld_DVB-T220.jpg|thumb|120px]]<br />
<br />
|- valign="top"<br />
|[[KWorld_DVBT-100 | DVBT-100]]<br />
<br />
[http://www.kworld.com.tw/en/index_digital.htm]<br />
|<br />
|DVB, analogue<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23883]]<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* Composite video In<br />
* Remote In<br />
|<br />
* Automatically detected by recent Linux kernel. Requires 'modprobe cx88-dvb' to enable DVB. Suspected same card as KWorld_V-Stream_Xpert_DVB-T_PCI. <br />
|<br />
<br />
|- valign="top"<br />
|[[KWorld DVB-T PC160-2T | DVB-T PC160-2T ]]<br />
<br />
[http://www.kworld.com.tw/product_overview.aspx?P_ID=215]<br />
|<br />
| '''NOTE: This card is IDENTICAL to Leadtek DTV2000DS, except for the USB ID, the remote, and the sticky label on the tuners!'''<br />
So please refer to DTV2000DS for extra info.<br />
Dual DVB-T tuners, also known as PEAK DVB-T Dual tuner PCI (221544AGPK)<br />
Working as single tuner card (at least) on 2008-06-05<br />
http://linuxtv.org/hg/~anttip/af9015-mxl500x-copy-fw/<br />
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files<br />
Ref http://marc.info/?l=linux-dvb&m=121268349100641&w=2<br />
A single tuner variant (PC-160-T) is now also supported.<br />
|[[Afatech AF9015|AF9015]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Note that curent kernel versions do not have a keymap for the provided remote, see here for some info about setting up a custom keymap: http://francisfisher.me.uk/problem/2012/kworld-pc160-2t-remote-control-on-ubuntu-linux-11-10-2/<br />
* From my experience, the latest driver (23/03/12) has some bugs that require daily hard resets of the device.<br />
* KWorld support are not interested in providing any assistance getting the device working: "Sorry,we can't help you to solve the remote problem in Linux,since we don't highlight/mention that it can support this system. If you have the problem in Windows system,we are willing to help you solve it."<br />
| <br />
[[Image:Kworld pc160.jpg|thumb|120px]]<br />
<br />
<br />
|}<br />
<br />
=== [[Leadtek]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 S|WinFast DTV1000 S]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=382&check=f]<br />
|<br />
| DVB<br />
| [[Chipset NXP 18271 + 10048 + 7130]]<br />
|<br />
* TV Antenna In<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Drivers will be included in 2.6.33 Kernel. Meanwhile can be downloaded http://kernellabs.com/hg/~mkrufky/dtv1000s<br />
* The tuner works with Mythbuntu 9.10 as does remote.<br />
| <br />
|- valign="top" <br />
| [[Leadtek WinFast DTV1000 T|WinFast DTV1000 T]]<br />
[http://www.leadtek.com.tw/eng/tv_tuner/overview.asp?lineid=6&pronameid=220]<br />
|<br />
| DVB<br />
| [[Conexant Systems, Inc.|Conexant]] based system see [[LR6650]]<br />
|<br />
* TV Antenna In<br />
* TV antenna out (loop through)<br />
* S-Video in<br />
* Composite video in<br />
* Remote In<br />
|<br />
* Since kernel 2.6.15-rc1<br />
* The tuner works with Mythbuntu 7.10 (i386) but the remote doesn't.<br />
* In Australia, this card appears to have been superseded by the DTV 1000 S which uses a different chipset and apparently is not supported.<br />
| [http://www.leadtek.com.tw/eng/tv_tuner/image/winfast_dvt1000t_2.jpg]<br />
<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H]]<br />
| $AUD 80<br />
| DVB<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 6-pin for video in<br />
|<br />
* DVB-T works with Ubuntu 7.10 (i386), Kaffeine 0.8.5 and the [http://packages.ubuntu.com/gutsy/libs/libxine1-plugins libxine1-plugins] package<br />
* FM tuner is not found, no radio function<br />
|<br />
<br />
|-<br />
| [[Leadtek WinFast DTV1800 H|WinFast DTV1800 H]]<br />
| $AUD 75<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 (on latest cards on sale in Aus), earlier cards had Xceive xc3028<br />
* Demod:ZL10353<br />
* Demux:CX23883<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
* Comes with remote control<br />
|<br />
* Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html]. Tested with Kaffeine and Australian DVB-T Broadcasts.<br />
* IRC works but default key mapping is incorrect with KDE4 - needs work.<br />
|[http://dev.gentoo.org/~dragonheart/winfast/_MG_1893.JPG]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000DS|WinFast DTV2000DS]]<br />
[http://www.leadtek.com/eng/tv_tuner/overview.asp?pronameid=530]<br />
| $AUD 65<br />
| DVB-T<br />
|<br />
* '''Tuner''': '''NXP TDA18211, but detected as TDA18271 by V4L drivers'''<br />
* '''Chipset''': AF9015 + AF9013<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x ph jack for IR sensor<br />
|<br />
* Dual DVB-T tuner card<br />
'''* Read the page regarding the working status of this card.'''<br />
* Supports HD streams<br />
* Is actually two USB devices attached though a VIA VT6210L PCI-to-USB bridge<br />
* Uses dvb_usb_af9015 and af9013 modules<br />
* Includes low-profile PCI bracket<br />
* Includes remote and Infra-Red sensor<br />
* Warning: The DTV 2000DS '''PLUS''' is a completely different card and is unsupported. <br />
| [[Image:Leadtek dtv 2000ds 2s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 3s.jpg|thumb|50px]]<br />
[[Image:Leadtek dtv 2000ds 4s.jpg|thumb|50px]]<br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H|WinFast DTV2000 H rev J]]<br />
| $AUD 75<br />
| DVB Analog Hybrid<br />
|<br />
* '''Tuner''': Philips FMD1216<br />
* '''Main Chipset''': [[Conexant Systems, Inc.|Conexant]] [[Conexant CX23881|CX2388x]] and [[Conexant Systems, Inc.|Conexant]] CX22702<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x ph jack for audio in<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* 1 x 4 pin audio output connector (internal CD audio type)<br />
|<br />
* Random success with analog OR DVB-T video no sound<br />
* See: [http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H]:<br />
* Add "cx88-dvb" to /etc/modules<br />
* Add "options cx88xx card=51" to /etc/modprobe.d/options<br />
* Add "options cx88xx card=51,51" to /etc/modprobe.d/options if using two cards<br />
* Try adding "options cx88-alsa index=1,2" to /etc/modprobe.d/options and use /dev/dsp in MythTV Frontend if having sound issues in MythTV<br />
* DTV + audio worked out of box in Mythbuntu 8.10 and Ubuntu 8.10. <br />
|<br />
|-<br />
| [[Leadtek WinFast DTV2000 H Plus|WinFast DTV2000 H Plus]]<br />
| $AUD 100<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive XC4000 on older cards (eg 107d:6f42), Xceive XC3028 on newer cards (eg 107d:6f44)<br />
* Demod:ZL10353<br />
* Demux:CX2388x<br />
|<br />
* 1 x RF TV (antenna)<br />
* 1 x RF TV (cable)<br />
* 1 x RF FM<br />
* 1 x ph jack for IR sensor<br />
* 1 x [http://en.wikipedia.org/wiki/Mini-DIN_connector MiniDin] 9-pin<br />
for CVBS, S-video and Audio in<br />
* Comes with remote control<br />
|<br />
* 107d:6f42: Works with patch available at [http://istvanv.users.sourceforge.net/v4l/xc4000.html http://istvanv.users.sourceforge.net/v4l/xc4000.html].<br />
* 107d:6f44: DVB-T works with "options cx88xx card=81" (using the vanilla v4l) in /etc/modprobe.d/video4linux but none of the other inputs work. Analog works with "options cx88xx card=51" but DVB-T doesn't, even when tuner=71 is specified.<br />
|<br />
<br />
|}<br />
<br />
=== [[LifeView]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T|FlyDVB-T]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt.htm]<br />
|<br />
|DVB-T only<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Composite in<br />
* Remote In<br />
|<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR301.jpg|thumb|85px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Duo|FlyDVB-T Duo]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_duo.htm]<br />
|<br />
|DVB-T and Analog<br />
|Philips [[SAA7133]]<br />
|<br />
* Cable/Antenna In (two)<br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:LR306.jpg|thumb|120px|]]<br />
|- valign="top"<br />
|[[LifeView FlyDVB Trio| FlyDVB Trio]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvb_trio.htm]<br />
|<br />
|DVB-T, Satellite and Analog<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
|<br />
* Satellite Antenna In<br />
* Digital Antenna In<br />
* Analog Antenna In<br />
* S-Video/Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Combination analog/digital card<br />
* Supported by Linux kernel 2.6.10.<br />
|[[Image:photo_dvb_trio.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|[[LifeView FlyDVB-T Hybrid|FlyDVB-T Hybrid]]<br />
<br />
[http://www.lifeview.com.tw/html/products/internal_tv/flydvbt_hybrid.htm]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
|<br />
|- valign="top"<br />
| style="white-space: nowrap" | [[LifeView FlyDVB-T Hybrid MCE PRO|FlyDVB-T Hybrid MCE PRO]]<br />
|<br />
|DVB-T and Analog HW encoder<br />
|<br />
* Philips [[SAA7131]] <br />
* Vixs encoder<br />
|<br />
* Cable/Antenna In <br />
* S-Video In<br />
* Composite In<br />
* FM In<br />
* Remote In<br />
|<br />
* Hybrid analog/digital HW encoder card<br />
* Supported by Linux kernel 2.6.15<br />
|[[Image:323.jpg|thumb|120px|]]<br />
|}<br />
<br />
=== [[Lorenzen]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[SL DVB-T PCI]] <br />
<br />
<strike>[http://www.lorenzen.de/produkte/cgi-bin/iboshop.cgi?showd60!,3709831960,3930]</strike><br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
* Can support +5V power supply for Antenna (Jumper on board)<br />
| <strike>(Old Design): [http://www.lorenzen.de/produkte/bilder/3922%20200.jpg]</strike><br />
[[Image:Lorenzen_SL_DVB-T_PCI.jpg|thumb|50px|]]<br />
|}<br />
<br />
=== [[Medion]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Medion CTX953 | CTX953]] <br />
<br />
(a.k.a Creatix CTX 953: [http://www.creatix.de/produkte/multimedia/ctx953.htm])<br />
|<br />
| DVB-T tested and works with 2.6.29, analog is untested by me. I suspect it works, too.<br />
|<br />
* NXP SAA 7131E/03/G<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
* NXP 8275AC1<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Audio-In (3.5mm)<br />
* Composite-In<br />
|<br />
* ml-thread: [http://article.gmane.org/gmane.comp.video.video4linux/34255]<br />
|<br />
[[Image:Medion_CTX953_front.jpg|thumb|150px|]]<br />
[[Image:Medion_CTX953_back.jpg|thumb|150px|]]<br />
<br />
|- valign="top"<br />
|<br />
Philips TV/Radio Card CTX918, (Medion 7134), PCI<br />
<br />
|~6€, Ebay Germany<br />
|DVB-T working, FM apparently too ([http://linuxtv.org/v4lwiki/index.php/Generic_SAA7134_Card_Installation Instructions])<br />
|<br />
<br />
* FMD1216ME<br />
* Philips SAA7134HL<br />
* SV92PL<br />
* CSP1034S<br />
<br />
|<br />
* Antenna In<br />
* FM In<br />
|<br />
[http://www.creatix.de/support/download/gruppe6/CTX918_spec.pdf Spec]<br />
[http://www.creatix.de/support/typ.php?tid=62&gid=6 Link to OEM]<br />
|<br />
[[Image:7134.jpg|thumb|150px|]]<br />
|}<br />
<br />
=== [[MSI]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D|TV@nywhere A/D]]<br />
|<br />
|DVB-T and Analog <br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* Hybrid analog/digital card<br />
* Supported by Linux kernel 2.6.15<br />
* clone of LifeView FlyDVB-T Hybrid<br />
* requires "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1]] <br />
|Around $65 AUD<br />
|'''Unsupported'''<br />
|<br />
*Philips [[SAA7133]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
|<br />
* TV Antenna in <br />
* FM Antenna in<br />
* S-Video in<br />
* Composite video + stereo audio in<br />
* IR-Remote<br />
|<br />
* As of kernel 2.6.23.13 the frontend seems to not work, even with "card=94"<br />
|<br />
|- valign="top"<br />
|[[MSI]] [[MSI TV@nywhere A/D#V1.1|TV@nywhere A/D v1.1 alternate]] <br />
|Around $65 AUD<br />
|Analog and DVB-T (partially)<br />
|<br />
*Philips [[SAA7131E]] <br />
*[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046A]]<br />
*Tuner 8275AC1<br />
|<br />
* FM Antenna in<br />
* TV Antenna in<br />
* AV input (comes with adaptor that allows connection of s-video or composite video as well as RCA connectors for audio) <br />
* IR-Remote<br />
|<br />
* This card mostly works with the latest drivers as of 2008-02-08 (tested using mythbuntu 2.6.22-14-generic kernel). There is a problem with unreliable firmware loading. The card only works if the firmware loads correctly.<br />
* Requires card=109<br />
|<br />
[[Image:MSI TV@nywhere A-D v1.1.JPG|thumb|120px]]<br />
|}<br />
<br />
<br />
=== [[Mygica]] ===<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Mygica T1800B|T1800B]]<br />
| 70 AUD<br />
|Dual DVB-T, DAB+ (untested), Remote Control (untested), <br />
|RTL2832U<br />
|<br />
* Antenna In<br />
* AV In<br />
|Requires out-of-tree drivers (see documentation)<br />
|[http://www.auspcmarket.com.au/info/EL-MY-T1800B/]<br />
|- valign="top"<br />
|[[Mygica T188|T188]]<br />
| 30 AUD<br />
|Single DVB-T, DAB+ (untested), Remote Control (untested)<br />
|RTL2832U, VIA VT6212L USB Host Controller<br />
|<br />
* Antenna In<br />
* IR In<br />
|<br />
* Uses same (out-of-tree) drivers as the T1800B.<br />
* Driver appears to have bug which prevents getting a signal lock if more than one of these cards are present.<br />
|[http://i49.tinypic.com/68rfon.jpg]<br />
|}<br />
<br />
=== [[Nebula]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Nebula DigiTV PCI|DigiTV PCI]]<br />
<br />
[http://www.nebula-electronics.com/information/info.asp?Code=0001]<br />
|ca. 150 €<br />
|DVB,VDR<br> NXT6000 demod supported by recent kernels, mt352 demod will be supported by kernels >= 2.6.14-rc1.<br />
|<b>Demod Chip</b><br><br />
<i>Old board:</i><br> <br />
[[ATI NXT6000]]<br><br />
<i>New board:</i><br><br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br><br />
<b>Tuner (tin box)</b><br><br />
[[Alps TDED4]] <i>(both boards)</i><br><br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* AV In<br />
* Remote In<br />
|<br />
* Comes with remote<br />
|[http://www.nebula-electronics.com/images/ProdPCI.jpg]<br />
|}<br />
<br />
=== [[NotOnlyTV]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[NotOnlyTV LV3H|LV3H]]<br />
<br />
[http://www.notonlytv.net/p_lv3h.html]<br />
| 39 €<br />
|<br />
*DVB-T <br />
*Analog (brightness problems)<br />
|<br />
*A/V Controller: [[Conexant CX2388x|Conexant CX-23881]]<br />
*Tuner: [[Xceive XC3028|Xceive 3028 ACQ]]<br />
*DVB-T Decoder: [[Zarlink_ZL10353|Intel CE6353 (WJCE 6353)]]<br />
|<br />
* Digital or Analog Antenna In<br />
* FM Antenna In<br />
* AV In<br />
* Remote In<br />
|<br />
* Subsystem ID: 14f1:8852 (Geniatech X8000-MT DVBT)<br><br />
Some options are needed to work properly: <br />
<code>options cx88xx card=81 tuner=71</code><br />
|[http://www.notonlytv.net/img/products/lv3h_01.jpg]<br />
|}<br />
<br />
=== [[NPG]] ===<br />
<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Real DVB-T]] <br>[http://www.npgtech.com]<br />
|<br />
|Doesn't seem to work.<br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23880-19]] CX22702-25<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In<br />
|<br />
* 2.6.16 kernel recognizes the card as "Conexant DVB-T reference design" (card=19)<br />
|<br />
|}<br />
<br />
=== [[Pinnacle]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[PCTV MediaCenter 300i]]<br />
<br />
[http://www.pinnaclesys.com/ProductPage_n.asp?Product_ID=2451&Langue_ID=4]<br />
|ca. 110 €<br />
<br />
(~40 € for "Dazzle" package with no remote)<br />
|DVB works with patches from [http://dl.bytesex.org/patches/], but see this thread [http://www.linuxtv.org/pipermail/linux-dvb/2005-December/007035.html] for recent regression post 2.6.12<br />
Everyone seems happy using Hartmut's Patch [http://www.linuxtv.org/pipermail/linux-dvb/2006-February/008345.html] with more recent kernels. Check the associated thread for more info...<br />
<br />
July 2006: Worked out of the box with recent kernel 2.6.17 Debian unstable!<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[Zarlink]] [[Zarlink MT352|MT352]]<br />
[[tda9887]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/ProductImages/Ss_01_MediaCenter300iB_02.jpg]<br />
<br />
[http://www.pinnaclesys.com/images/box/box_128x148_pctvmediacenter300i_bl_4.jpg]<br />
|- valign="top"<br />
|[[PCTV MediaCenter 310i]]<br />
<br />
[http://www.pinnaclesys.com/PublicSite/sp/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+310i.htm]<br />
|ca. 110 €<br />
|DVB works with Debian AMD64 testing<br />
<br />
Worked out of the box with recent kernel 2.6.20<br />
|Philips [[Philips SAA7134|SAA7134]]<br />
[[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
[[tda8275A]] PLL<br />
|<br />
* Antenna In<br />
* Remote In<br />
* Composite Video In<br />
|<br />
* Hybrid DVB-T / Analogue card.<br />
* Comes with remote control.<br />
* Quality better than Pinnacle software for win xp.<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[PCTV Dual DVB-T Pro PCI / 2000i]] <br />
<br />
[http://www.pinnaclesys.com/PublicSite/de/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+%28DVB-S_DVB-T%29/PCTV+Dual+DVB-T+Pro+PCI.htm]<br />
|ca. 120 €<br />
|Not working so far (Oct.2006). Shows up as three unknown PCI devices ID 0040, 0041, 0042 with subsystems 0044. Manufacturer ''Pinnacle Systems Inc.'' detected correctly.<br />
|2x [[Zarlink ZL10353]]<br> 2x [[Microtune MT2060]]<br />
[[PINNACLE DTV BRIDGE 0612MP007/0611MP007]]<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* Dual DVB-T tuner card.<br />
* Comes with remote control. Uses Pinnacle's own application, might not be avalable for Linux.<br />
* [http://reactorcore.net/v4l/pctv-2000i High Quality Pictures]<br />
|[http://www.sandbox.de/dvb-t/Pinnacle_Dual_DVB-T_Pro_PCI.jpg]<br />
|}<br />
<br />
=== [[Satelco]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Satelco Easywatch PCI DVB-T]]<br />
<br />
[http://www.satelco.de/htm/shop/popup/intro_dvb_t.htm]<br />
|<br />
ca. 60 €<br />
|<br />
*Not supported yet by present kernel release (2.6.25).<br />
*A [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=251130bf266000fe6e9fdccda50fe4b5c1d6cb24 patch] is on the way. Latest [http://linuxtv.org/hg/v4l-dvb v4l-dvb drivers] should be [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers#Case_2:_Installation_of_LinuxTV_Drivers_Required manually compiled] (this requires kernel 2.6.19 or higher).<br />
*This card is not suitable for [http://knoppmyth.net/knoppmyth.html KnoppMyth R5F27], as the aforementioned workaround may be tricky to apply to the distro's kernel (2.6.18-chw-13).<br />
|<br />
* '''PCI bridge''': [[Philips SAA7146]]<br />
* '''Tuner''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In (top)<br />
* Antenna Out (bottom)<br />
|<br />
Onboard connector to Common Interface extension kit (not included).<br />
|<br />
[http://www.satelco.de/img/produkte/easywatch/easywatch_dvb_t_2.jpg]<br />
[http://www.satelco.de/img/produkte/easywatch/dvbt/thumb/tn_2vorne.jpg]<br />
|}<br />
<br />
=== [[TechniSat]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TechniSat AirStar 2 PCI / Air2PC DVB PCI|AirStar 2 PCI / Air2PC DVB PCI]] [http://www.technisat.de/?site=produkte/produkteview.php&kid=1,29&pid=1352&PHPSESSID=69a82464181e34e44928a4fe4ff4fe6c&reload]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.vdr-portal.de/board/thread.php?sid=&postid=154853][http://www.vdr-portal.de/board/thread.php?postid=163580#post163580]<br />
| <br />
* [[Zarlink]] [[Zarlink MT352|MT352]] <br />
* (autodetect in linux kernel driver also includes: cx24123, cx24113, s5h1420 modules)<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
|<br />
* Remote and LIRC Compatible Serial Dongle Included.<br />
<br />
|[[Image:AirStar_DVB-T_PCI.jpg|thumb|120px]]<br />
|}<br />
<br />
=== [[TechnoTrend]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|-<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1200|TT-DVB-T 1200]]<br />
|ca. 210 €<br />
|DVB, VDR<br><br />
|?<br />
|<br />
* Antenna In<br />
* Video Out<br />
|<br />
* The TT-DVB-T 1200 is the only known "[[Full-featured Card|full-featured]]" DVB-T Card.<br />
* Can only tune UHF channels: '''VHF is not supported with this card!'''<br />
|.<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1500|TT-DVB-T 1500]]<br />
<br />
[http://www.technotrend.com/2783/TT-budget__T-1500.html]<br />
|ca. 79 €<br />
|DVB, VDR<br><br />
|Bridge:[[Philips SAA7146]]<br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046]]<br><br />
|<br />
* Antenna In<br />
* [[Common Interface]] (on board connector). Needs to be bought separately.<br />
|<br />
* Gives wrong frequencies when channelscanning in for example xawtv4 and mythtv for at least one user. As long as the channel frequencies are adjusted afterwards everything works fine. (Hardware: 0000:00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01))<br />
* To make the fine piece of remotecontrol that comes with the budget t 1500 card, add these lines to:<br />
* /etc/modprobe.d/options<br />
* options budget_ci rc5_device=255<br />
* And use it with the [http://linuxtv.org/vdrwiki/index.php/Remote-plugin VDR Remote-plugin]<br />
<br />
<br />
|<br />
<br />
|- valign="top"<br />
|[[TechnoTrend TT-DVB-T 1300|TT-DVB-T 1300]]<br />
<br />
[http://www.technotrend.de/english/products/pcproducts3-1.html] [http://www.technotrend.de/english/products/pcproducts3-2.html]<br />
|<br />
|DVB, VDR<br />
|[[Philips]]<br />
|<br />
* Antenna In<br />
|<br />
|<br />
<br />
|- valign="top"<br />
| style="white-space:nowrap" | [[TechnoTrend TT-PCline Budget3 TA1000|TT-PCline Budget3 TA1000]]<br />
|ca. 90 €<br />
|?<br />
|?<br />
|<br />
* Antenna In<br />
|<br />
* Combination DVB-T and analog (PAL/NTSC)<br />
|[http://www.dvbshop.net/images/budget3.jpg]<br />
|}<br />
<br />
=== [[TerraTec]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1200_DVB-T|Cinergy 1200 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=224]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Bridge: [[Philips SAA7146]]<br><br />
Tuner: [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* Video In<br />
| <br />
|<br />
|- valign="top"<br />
|[[TerraTec_Cinergy_1400_DVB-T|Cinergy 1400 DVB-T]]<br />
<br />
[http://tvde.terratec.net/modules.php?op=modload&name=News&file=article&sid=244]<br />
|ca. 80 €<br />
|DVB, VDR <br />
|Tuner: Thomson [[TT 7579]]<br><br />
Chipset Connexant CX88XX<br />
|<br />
* Antenna In<br />
* Antenna Out<br />
* S-Video In<br />
* S-Video/Composite Adapter<br />
* Remote In <br />
|<br />
* Use cx88xx with option card=30 (if kernel>=2.6.13) or card=19 (if kernel < 2.6.13) and use drivers:<br />
*cx88_dvb <br />
*cx8802 <br />
*cx8800 <br />
*cx88_blackbird (connexant ref. design)<br />
|[[http://www.sandbox.de/dvb-t/TerraTec_Cinergy_1400_DVB-T_PCI.jpg]]<br />
|- valign="top"<br />
|[[TerraTec Cinergy HT PCI|Cinergy HT PCI]] <br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T, Analog TV, Radio<br />
|<br />
* '''Tuner''': Thomson [[TT 7579]]<br />
* '''Chipset''': Philips [[Philips_SAA7134|SAA7134]]<br />
* '''Analog Tuner''': tda8290+75<br><br />
* '''Digital Chipset''': [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Works with Module saa7134 for analog TV and saa7134-dvb for DVB-T<br />
* Drivers from linuxtv.org work fine, no special options needed.<br />
* Has remote included, does not work for me in linux so far.<br />
* PCI subsystem ID: 153b:1175<br />
* Note: There is an unsupported newer revision under the same name, see below.<br />
|<br />
|- valign="top"<br />
| style="white-space:nowrap" | New [[Cinergy HT PCI]]<br />
<br />
[http://tven.terratec.net/modules.php?op=modload&name=News&file=article&sid=249]<br />
|ca. 50 €<br />
|DVB-T<br />
|Chipset [[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX2388x]]<br />
|<br />
* Antenna In<br />
* S-Video In<br />
* Remote In <br />
* Audio Out<br />
|<br />
* Newer revision of TerraTec Cinergy HT PCI<br />
* PCI subsystem ID: 153b:1177<br />
* DVB-T working with at least 2.6.35 vanilla, cx23885 + zl10353<br />
|<br />
|}<br />
<br />
=== [[TwinHan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
<br />
|- valign="top"<br />
| [[Twinhan VisionDTV Ter PCI|VisionDTV Ter PCI]] [http://www.twinhan.com]<br />
|ca. 80 €<br />
|DVB, VDR possible<br />
<br />
[http://www.heise.de/ct/foren/go.shtml?read=1&msg_id=5445372&forum_id=47443] (lt. c't 11/2004)<br />
|<br />
* [[Fusion 878A]]<br />
|<br />
* Antenna in<br />
|<br />
* Remote & IR-receiver included (via USB)<br />
* Identical to the [[Hama]] [[DVB-T PCI-Karte]]<br />
|[http://www.twinhan.com/product_terrestrial_4.asp]<br />
<br />
|- valign="top"<br />
|[[DTV Ter PCI (A&D)]] [http://www.conrad.de/script/twinhan_dtv_ter.sap]<br />
VP-30540<br />
|ca. 70 €<br />
|Works ok with FC4 latest 2.6 kernel and cx88xx option card=42.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* [[Zarlink]] [[Zarlink MT352|MT352]]<br />
* [[Conexant]] [[Conexant CX2388x|CX23883]]<br />
* [[Philips]] FMD1216ME<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
You will see 4 new PCI-Devices:<br />
* 14f1:8800 Conexant CX23880/1/2/3 PCI Video and Audio Decoder<br />
* 14f1:8801 unknown<br />
* 14f1:8802 unknown<br />
* 14f1:8804 unknown<br />
<br />
The non-DVB-T (analog-tuner) evtl. works running<br />
modprobe cx88xx tuner=63<br />
<br />
EDIT: Got DVB-T to work with option card=42:<br />
<br>cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro<br />
<br>Playback is smooth the earlier comment about Jekryness was due<br />
<br>to not have overlay switched on. <br />
<br>The card even looks like the digitalnow DNTV Live! DVB-T Pro [http://www.digitalnow.com.au/product_pages/DNTV_Pro.html]<br />
|[http://www.mcsat.co.uk/catalog/images/ter-D+A.gif]<br />
|- valign="top"<br />
|[[TwinHan 3506 Hybrid|3506 Hybrid]]<br />
<br />
[http://www.twinhan.com/product_D%2BA_3056_1.asp]<br />
<br />
|~ £25 in UK<br />
|Works ok with FC7 latest 2.6 kernel and saa7134 module, card=109.<br />
<br />
Cannot use the DVB, Analogue or FM tuners simultaneously.<br />
|<br />
* Philips SAA7131E<br />
* [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046H]]<br />
|<br />
* Antenna in<br />
* FM (radio) in<br />
* Composite in<br />
* S-Video in<br />
* Remote in<br />
|Hybrid (DVB-T & analog TV)<br />
<br />
I<sup>2</sup>C gate tuning problem, you'll need to compile the driver with a small change<br />
|<br />
|}<br />
<br />
=== Ultraview ===<br />
* [[DViCO_FusionHDTV_DVB-T1|Ultraview DVB-T Plus]]<br />
<br />
=== [[Yuan]] ===<br />
<br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Model'''<br />
|'''Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures'''<br />
|- valign="top"<br />
|[[Stratford PG300]] <br />
<br />
[http://www.yuan.com.tw/en/products/vdo/vdo_PG300.html]<br />
|AUD $45<br />
|DVB, VDR possible<br><br />
|[[Conexant Systems, Inc.|Conexant]] [[Conexant CX2388x|CX23881-19]] [[Conexant CX22702|CX22702-15]] <br />
|<br />
* Antenna in<br />
* IR in<br />
* Antenna Loop out<br />
|<br />
* Remote & IR-receiver included<br />
* DVB Works with "options cx88xx card=43"<br />
* Remote '''Not''' Working<br />
* Includes Low-Profile bracket<br />
|<br />
[http://www.gamedude.com.au/yuan]<br />
|<br />
<br />
|-<br />
| [[Yuan MPC 788 Hybrid Mini-PCI]]<br />
<br />
[http://www.yuan.com.tw/jp/products/tuner/productscontent3.htm]<br />
| $25USD<br />
|DVB-T Analog Hybrid<br />
|<br />
* Tuner: Xceive xc3028<br />
* Demod: ZL10353<br />
* Demux: CX23883<br />
|<br />
* Antenna In<br />
<br />
|<br />
* Remote and external antenna included.<br />
* Same components as Winfast DTV1800 card.<br />
* Analog works with "options cx88xx card=81" in "/etc/modprobe.d/video4linux"<br />
* Tested analog with MPlayer.<br />
* Basic testing with Kaffeine. Kaffeine detected the card and scanned for channels, however testing was done in Canada where no DVB-T signal exist.<br />
|<br />
<br />
|}<br />
<br />
== Currently Unsupported DVB-T PCI cards==<br />
{{help to support}}<br />
<br><br />
{| border=1 cellpadding=2 cellspacing=0 valign="top"<br />
|- bgcolor=#efefef valign="top"<br />
|'''Manufacturer<br><br />
Model number<br><br />
<br>Price'''<br />
|'''Supports'''<br />
|'''Tuner / Chips'''<br />
|'''Connectors'''<br />
|'''Notes'''<br />
|'''Pictures''<br />
|- valign="top"<br />
|'''[[Pinnacle]]<br><br />
[[Pinnacle PCTV DVB-T PCI (250i)|PCTV DVB-T PCI (250i)]]''' [http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Digital+PVR+(DVB-S_DVB-T)/PCTV+DVB-T+PCI+(250i).htm]<br><br />
<br><br />
~£26 in the UK<br />
|No support yet<br />
|<br />
|<br />
* Antenna In<br />
* Remote In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
|[http://www.pinnaclesys.com/images/screenshots/PCTV_DVB-T_PCI_persp_midres.jpg]<br />
<br />
|- valign="top"<br />
|'''[[X3M digital S.A. | X3M tv-tuners]]<br><br />
[[x3m digital S.A HPC2000|HPC2000]]'''<br>EUR ~45 (Euro)<br />
|No support yet<br><br />
|<br />
*Chipset: Conexant CX23880<br />
*Multiplexer-Demultiplexer: hcf4052<br />
*Demodulator: ZL10353/WJCE6353 <br />
*Tuner: xc3028 (Xceive)<br />
|<br />
* Antenna In<br />
* Remote In<br />
* FM In<br />
* S-Video In<br />
|<br />
* DVB-T card<br />
* Comes with remote control.<br />
* Supports MPEG-2 and MPEG-4(H264)<br />
* it seems to be a [http://www.geniatech.com/dwonloadf/d_dvbt.htm Geniatech DVB-T TV Hybrid X8000MT]; windows drivers of both cards are the same.<br />
* an open source linux driver, seemingly based on an older checkout of the V4L HG tree, can be found at [http://www.geniatech.com/driver-eng/linux/v4l-dvb-experimental-x8000mt.tar.gz]<br />
* the firmware, which the 2.6.31-rc1 kernel tuner driver does not seem to have a loader for, is located at [http://www.geniatech.com/driver-eng/linux/fw25_linux.tar.gz]<br />
* this geniatech firmware is identical with the X3M firmware provided here[http://www.x3mtv-tuners.de/uploads/media/HPC2000_x86_Linux_Treiber.zip] This supports the notion that those cards are in fact identical<br />
* the xc3028-v27.fw firmware extracted from other Xceive tuner based cards' windows drivers via extract_xc3028.pl does not seem to work on this card<br />
* from skimming the source code of the xc3028 driver(kernel and geniatech) it seems to me that the xc3028-v27.fw firmware is simply a binary compound of the same components(though the length of the chunks seems to differ) that are provided in the geniatech firmware.<br />
|<br />
[[Image:Hpc2000.jpg|thumb|120px|]]<br />
<br />
|- valign="top"<br />
|'''[[Compro Technology | Compro]]<br><br />
[[Compro VideoMate DVB-T220|VideoMate DVB-T220]]'''<br />
|No support yet<br><br />
Detects as a T200<br />
|<br />
*Chipset: SAA7130<br />
*COFDM Demodulator: MT352<br />
*Tuner: [[Quantek QT1010]]<br />
|<br />
*Antenna In<br />
*S-Video in<br />
*Remote In<br />
|<br />
* DVB-T Card<br />
* Comes with remote control.<br />
|<br />
[[Image:VideoMate_DVB-T220.JPG|thumb|120px|]]<br />
|}<br />
<br />
<br />
[[Category:DVB-T| ]]<br />
[[Category:DVB-T PCI Cards| ]]</div>Michaelp