View source for AVerMedia M103 (Hybrid) Mini PCI

[[Image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]]

An [[ATSC]] [[ATSC PCI Cards|PCI card]] from [[KWorld]].  

The ATSC 115 is supported under Linux since kernel 2.6.24.

''Note: The page contents menu will automagically build itself, so you need not worry about it''

==Overview/Features==
''Discuss the features and facets of the device here. For example:''<br>

* PCI v2.3 interface
* Inputs: Antenna (Composite)
* Outputs: None
{{Note|This devices just has one input through a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video in and Remote}} 

===Components Used===
''List the hardware ICs and modules used by the device here. For example:''<br>
* QT1010 (tuner)
* Intel/Zarlink MT352 (demodulator)
* NXP/Philips SAA7130HL (A/V decoder and PCI Interface)

===Other Images===
''Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage.  For example:''<br>
<gallery perrow=5>
 Image:VideoMate_DVB-T220_box.jpg|VideoMate DVB-T220 Box
 Image:VideoMate_DVB-T220_remote.jpg|VideoMate DVB-T220 Remote
</gallery>

===Identification===
''Provide here, for PCI/PCIe devices, the relevant output of <code>lspci -vnn</code> or, in the case of USB devices, <code>lsusb -v </code>. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space.  For example:''<br>
 #  sudo lspci -vvnn -s 04:07
04:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
	Subsystem: Avermedia Technologies Inc Device [1461:f636]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: saa7134
	Kernel modules: saa7134


==Making it Work==
''Is it supported under Linux?  Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)''

===Firmware===
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''

===Drivers===
''Provide the details of where the drivers and patches and necessary tools are available.''

===Sample Kernel Output===
''Provide the '''relevant''' portion of dmesg here.  For example:''<br>
 # dmseg
 [...]
 [   26.903212] saa7130/34: v4l2 driver version 0.2.14 loaded
 [   26.904817] saa7134 0000:04:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
 [   26.904831] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 17, latency: 0, mmio: 0xfd8fe000
 [   26.904838] saa7134 0000:04:07.0: setting latency timer to 64
 [   26.904844] saa7133[0]: subsystem: 1461:f636, board: AVerMedia MiniPCI DVB-T Hybrid M103 [card=145,autodetected]
 [   26.904858] saa7133[0]: board init: gpio is 220000
 [   27.072671] saa7133[0]: i2c eeprom 00: 61 14 36 f6 00 00 00 00 00 00 00 00 00 00 00 00
 [   27.072690] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
 [   27.072703] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 0e ff ff ff ff
 [   27.072717] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072730] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
 [   27.072743] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072757] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072770] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072783] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072797] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072810] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072823] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072836] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072850] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072863] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.072876] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 [   27.116022] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
 [   27.128129] saa7133[0]: i2c scan: found device @ 0xc2  [???]
 [   27.232043] tuner' 0-0061: chip found @ 0xc2 (saa7133[0])
 [   27.495472] xc2028 0-0061: creating new instance
 [   27.495481] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
 [   27.496778] firmware: requesting xc3028-v27.fw
 [   27.849632] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
 [   27.868026] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
 [   36.508063] (0), id 00000000000000ff:
 [   36.508071] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
 [   36.676080] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
 [   37.116657] saa7133[0]: registered device video0 [v4l2]
 [   37.117502] saa7133[0]: registered device vbi0
 [   37.144805] saa7134 ALSA driver for DMA sound loaded
 [   37.145363] saa7133[0]/alsa: saa7133[0] at 0xfd8fe000 irq 17 registered as card -2
 [   37.272116] xc2028 0-0061: attaching existing instance
 [   37.272123] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
 [   37.272742] DVB: registering new adapter (saa7133[0])
 [   37.272749] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
 [   37.273160] mt352: mt352_init: hello
 [...]
 [   43.900838] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
 [   44.068521] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
 [   46.293245] mt352: mt352_init: hello
 [...]

===Remote Control Support===
''Discuss support for the remote control here.''

==External Links==
''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:''<br>
* [http://www.comprousa.com/en/product/t100t220/t220.html Compro T-220 product page]


''Finally, add anything else that you think might be relevant under an appropriate heading.''