KWorld ATSC 115: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
[[image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Front view of ATSC 115]]

An [[ATSC]] [[ATSC PCI Cards|PCI card]]. This device, which is also known as the KWorld PlusTV HD PCI-115, is very (exactly?) similar to the [[KWorld]] [[KWorld ATSC 110|ATSC 110]].
An [[ATSC]] [[ATSC PCI Cards|PCI card]]. This device, which is also known as the KWorld PlusTV HD PCI-115, is very (exactly?) similar to the [[KWorld]] [[KWorld ATSC 110|ATSC 110]].



Revision as of 04:15, 30 September 2007

Front view of ATSC 115

An ATSC PCI card. This device, which is also known as the KWorld PlusTV HD PCI-115, is very (exactly?) similar to the KWorld ATSC 110.

Components:

It has a new PCI ID, so currently it is detected as a generic card by the saa7134 driver. Loading the module with "card=90" should set things up exactly the same as a KWorld ATSC 110.

The card ships with a different remote than the ATSC 110; it is not currently known if the same keycodes are used.

Output of lspci -vvnn :

02:09.0 0480: 1131:7133 (rev d1)
        Subsystem: 17de:7352
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fcfdf800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=3 PME-

Output of lspci -vn :

02:09.0 0480: 1131:7133 (rev d1)
        Subsystem: 17de:7352
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at fcfdf800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2